|
Vengeance Racing claims "WORLDS MOST POWERFUL C7 Z06 Title- 1088RWHP/1079RWTQ
If holding the M7 1/4 mile trap speed AND 1/2 mile top speed records were not enough..... Vengeance Racing teamed up with our friends at Nitrous Outlet to take things one step further. Knowing the 1.7L blower has very little (if anything) left to give our current combination, we decided to add a full nitrous system to the mix.
For those of you who have not followed our build progress our C7Z currently has the following modifications: Halltech Carbon Fiber CKNZ VR ported Throttlebody VR 2.38 Upper Pulley Kit VR Lower Damper (9% OD) VR Stage III Custom Camshaft Kit-Retains VVT/Deletes DOD American Racing 2" Stainless Long tubes with 3" ORX B&B Fusion Catback Exhaust RPS Triple Carbon Clutch with Tilton Hydraulics RPM Level VII TR6070 Transmission Driveshaft Shop Half Shafts LG Motorsports Drag Spindles VR Flex Fuel Sensor Kit Alky Control Dual Nozzle Methanol Injection System After years of building some of the quickest/fastest LSA/LS9 powered vehicles in the country we knew we wanted Nitrous Outlet to design a spray bar system for our LT4 supercharger to ensure equal distribution from our nitrous system. As always the guys came thru for us!! https://cimg4.ibsrv.net/gimg/www.cor...cef9fbf8a9.jpg https://cimg3.ibsrv.net/gimg/www.cor...bf018f62ec.jpg https://cimg0.ibsrv.net/gimg/www.cor...72af171b23.jpg https://cimg2.ibsrv.net/gimg/www.cor...3184c2f5e1.jpg https://cimg1.ibsrv.net/gimg/www.cor...ef5c794710.jpg We also added: Nitrous Outlet 2 Gallon dedicated fuel cell Nitrous Outlet TWIN Carbon fiber nitrous tanks Nitrous Outlet Billet Bottle Bracket NOS Launcher Progressive controller. https://cimg0.ibsrv.net/gimg/www.cor...aeb0830047.jpg https://cimg1.ibsrv.net/gimg/www.cor...712e6341d9.jpg All Tuning was done on E85 (57%) (Main tank and dedicated fuel cell) Using a 41 nitrous jet we produced 956RWHP/936RWTQ for a gain of 169RWHP/124RWHP https://cimg2.ibsrv.net/gimg/www.cor...1e30613b1f.jpg This was too close to the ever so tempting 1000RWHP mark so we swapped in a 57 jet and pulled a few additional degrees of timing and the result was 1088RWHP/1079RWTQ!!! These #s solidify our C7Z as the Worlds Most Powerful C7 Z06 to date.!!!! https://cimg3.ibsrv.net/gimg/www.cor...ca16c95b89.jpg Vengeance Racing was the first to crack 1000RWHP with our C7 Stingray and we have now done it again with our C7 Z06. Rest assured we will be testing at the drag strip in the coming weeks and will be running at WannaGOFAST Ga 1/2 mile early September. Feel free to contact us with any questions or to discuss your particular goals!!! __________________ |
Simply badass ron, good work man. Ready to see what's next on the agenda.:thumbs::cheers:
|
So when do we get to see you pull the screw blower off and replace it with a YSI/2200R and hit it with nitrous again?
|
Originally Posted by SquatchMachining
(Post 1590105527)
So when do we get to see you pull the screw blower off and replace it with a YSI/2200R and hit it with nitrous again?
|
Originally Posted by on3wego
(Post 1590105575)
I'd like to see them switch it out with a magnuson just to see the difference. 1.7 vs 2.3L... :lol:
If you must continue down the screw blower path.. A 2.9 Whipple would be the best bet.. :thumbs: |
Thanks guys!! We are torn as we want to do an aftermarket blower upgrade also. The Magnuson 2.3 will fit under the hood and should add some power/reduced inlet temps. That said, the ECS Novi 2200R kit is awful tempting... The only issue is keeping with "the spirit" of the Z06 we should stay PD blower....
First world problems..... |
Originally Posted by Ron@Vengeance Racing
(Post 1590106283)
Thanks guys!! We are torn as we want to do an aftermarket blower upgrade also. The Magnuson 2.3 will fit under the hood and should add some power/reduced inlet temps. That said, the ECS Novi 2200R kit is awful tempting... The only issue is keeping with "the spirit" of the Z06 we should stay PD blower....
First world problems..... :rofl::rofl: Nice work as always guys!! Can't wait to see it in action come September. |
Originally Posted by Ron@Vengeance Racing
(Post 1590106283)
Thanks guys!! We are torn as we want to do an aftermarket blower upgrade also. The Magnuson 2.3 will fit under the hood and should add some power/reduced inlet temps. That said, the ECS Novi 2200R kit is awful tempting... The only issue is keeping with "the spirit" of the Z06 we should stay PD blower....
First world problems..... Btw I'v used a magnuson first hand on a zl1.. torque monsters:D |
Killer numbers as always Ron. You and your guys got this down to a science.
-Lance |
Great job Ron :thumbs::thumbs:
You made my Stingray a monster along with my brothers and I'm loving it. Knew it was only a matter of time before you knock down 1k on the Z. Another vote for the ecs centri here :rock: /fred |
Thanks for the kind words guys!! Fred we are REALLY happy you and Derrick are enjoying your new power :)
|
Love nitrous threads!!!
|
Originally Posted by 10mm_
(Post 1590120338)
Love nitrous threads!!!
|
Video of 2nd to 3rd gear blowing off the tires would be nice:)
That is a pretty trick setup, very stealthy. Enjoy the weekend. |
Originally Posted by SteveDoten@ARH
(Post 1590123777)
Video of 2nd to 3rd gear blowing off the tires would be nice:)
|
Nice job everyone over at Vengeance !!!
Can't wait to see this thing again in Clayton . I may have to mount my baby bottle to try to keep up :crazy2: |
Originally Posted by Ron@Vengeance Racing
(Post 1590106283)
Thanks guys!! We are torn as we want to do an aftermarket blower upgrade also. The Magnuson 2.3 will fit under the hood and should add some power/reduced inlet temps. That said, the ECS Novi 2200R kit is awful tempting... The only issue is keeping with "the spirit" of the Z06 we should stay PD blower....
First world problems..... Put it on:rock::cheers: |
| All times are GMT -4. The time now is 03:09 PM. |
© 2024 MH Sub I, LLC dba Internet Brands