F/s AFR 180LT
 

AFR 9908 180LT 58cc LT1 cylinder heads SOLD
Stock ported LT1 intake manifold, accepts 58mm TB $300 obo shipped.


https://cimg5.ibsrv.net/gimg/www.cor...628e2eae9f.jpg


https://cimg8.ibsrv.net/gimg/www.cor...efdb486cb0.jpg

https://cimg1.ibsrv.net/gimg/www.cor...09966c1e04.jpg

I assume these are not the eliminators, Do you have any info on these,, Valve Size, Spring Info, Flow #s?? Thanks in advance,

Did you happen to dyno it with the heads?
Who ported the intake?

I do not know who ported this intake, but they did do a nice job welding up and smoothing the inside. I also do not have any dyno information with these heads. I did email AFR about the 9908 p/n and they replied that the correct p/n is 0908. I sent the picture of the 9908 stamp and asked if it was an error, waiting for a reply.

Are the heads off of your car?
How long were they run and why the removal?

Yes, the heads are off my car. I ran them for about 1 year, to and from work occasionally and to the track on weekends. I removed them because I built a 396 and purchased a set of AFR 210's.