FS: C4 Round Taillight Flush Mount Kit
A/O 7/6/20 I have one set left. See post #40 for more info.
The kit comes with hardware, including the extension studs, wingnuts, washers, 7mm screws, speed clips and instructions. The studs screw into your existing mounting screw boss. Minor drilling to expand the screw hole in the tail light mounting boss is needed to screw in the new extended studs. The kit is $50 including Priority shipping to the lower 48. Are you tired of changing out your taillight bulbs scraping your skin trying to reach them from the bottom, through the license plate opening, or taillight openings repeating the dropping and picking up of the screws or your tools on the ground or into the frame void never to see them again? This kit not only flush mounts your taillights but you'll never need a 10mm socket or wrench again. The retaining knobs easily spin on and off. Stop doing this. https://cimg5.ibsrv.net/gimg/www.cor...fadfbe837f.jpg Or this. https://cimg7.ibsrv.net/gimg/www.cor...69eb7f800c.jpg A very cool look https://cimg5.ibsrv.net/gimg/www.cor...a7e4574ee6.jpg From any angle https://cimg2.ibsrv.net/gimg/www.cor...48c14bc2cd.jpg This solves the problem of dropping screws and tools and makes changing out the bulbs so much easier. Probably doesn't help with arm scraping but makes the task easier. Plus you get the unique and cool look which begs the question..."How did you do that?" https://cimg3.ibsrv.net/gimg/www.cor...aaa141b23a.jpg You'll receive the extended studs, wingnuts, washers, 8 speed nuts and 8 7mm screws. The speedclips and screws hold the black plastic bracket to the urethane bumper. You don't really need to attach the black plastic bracket to the bumper but it does help when installing or removing the taillight housings. Taillights are not included. https://cimg0.ibsrv.net/gimg/www.cor...1d9f8cff07.jpg |
Wtb
Originally Posted by MrRenoman
(Post 1591152317)
1 set left.
Art |
FS: C4 Round Taillight Flush Mount Kit
I would like to buy a kit.
Payment sent 1-07-15 @1:19pm |
Thanks Eric, your kit is in the mail.
Art |
88vetteL98,
Payment received, item will be shipped tomorrow 1/8/16 USPS Priority. Thank you, Art |
Originally Posted by MrRenoman
(Post 1591259245)
Thanks Eric, your kit is in the mail.
Art |
very cool! :thumbs:
|
If you are going to put together some more kits I would be interested. Thank You Mike
|
Originally Posted by whitemj1948
(Post 1593945911)
If you are going to put together some more kits I would be interested. Thank You Mike
|
Originally Posted by L98Justin
(Post 1593952113)
same:cool:
|
I would be interested if you get more kits in stock.
|
whitemj1948, L98Justin, and slow-vette. I'm putting them together. I'll get back to you soon. Weather has been hampering efforts.
Thanks, MrRenoman |
I would like a kit also if I'm not too late.
Thanks Dave |
Dave,
I had one left after the 3 previous requests. I'll let you know when I'll be ready to ship. I supply new U speed clips which I need to get Monday or Tuesday Thanks, MrRenoman |
Originally Posted by MrRenoman
(Post 1594075133)
Dave,
I had one left after the 3 previous requests. I'll let you know when I'll be ready to ship. I supply new U speed clips which I need to get Monday or Tuesday Thanks, MrRenoman |
Tail light conversion
Thanks for the email. If you will send me your payment info I will pay you now and you can ship the kit when available. My address is: Michael White, 3018W 200S, Reynolds, Indiana 47980-8108. Thanks Mike:flag:
|
Thank you sir.
Originally Posted by MrRenoman
(Post 1594075133)
Dave,
I had one left after the 3 previous requests. I'll let you know when I'll be ready to ship. I supply new U speed clips which I need to get Monday or Tuesday Thanks, MrRenoman |
PMs sent, ready to ship
Thanks, MrRenoman |
PM Sent. Thanks
|
payment sent brother :cheers:
|
All times are GMT -4. The time now is 10:29 PM. |
© 2024 MH Sub I, LLC dba Internet Brands