|
***Reduced*** F/S 1996 Corvette with LT4 engine, 6 speed ZF, and 110k miles, $8500
Mods:
K&N intake Borla exhaust removed saggy headliner History: Bought the car in 2012, when it had 90k miles. I am the third owner (I think), and I was told it had been garaged previously. Since having it, I have had it garaged most of the time. Barely worn Continental ExtremeContact DW tires installed in 2014, but the front-right tire-pressure sensor got mauled on tire installation. I might try to sue the dealer in small claims, but I've never done that. New parts: accessory belt rear wheel bearing assemblies clutch slave cylinder KYB adjust-a-shocks (not yet installed) new headliner materials (not yet installed) https://cimg1.ibsrv.net/gimg/www.cor...da21bc18ed.jpg |
Lt-1
Is it an LT-4 or and LT-1 With an LT-4 engine? Also, where is the car located?
thanks, tankengine |
It is not a GS, but does have the LT4 engine (higher revving, increased power, etc.). I am located in West TN. Any more questions?
|
All 6 speed 96s were LT4s
Any interior pics? |
What town in West TN? I grew up in Paris.
Can you email me more pics including engine and interior grmfarm@gmail.com? Thanks, Keith |
Hi, yes I'll try to get more pics up soon. I've been busy moving from Jackson to Memphis
|
Please post a picture of the RPO sticker from under the glove box and let me know when you're done moving. TIA
|
AG1 Power Driver Seat
AG2 Power Passenger Seat AK5 Front seat S.I.R. system (driver & pass.) 9496 AR9 Base Leather Seats BGR Bowling Green assembly plant CF7 Removable Roof Panel (Solid Body Color) C68 Electronic Climate Control DL5 roadside service information decal DL8 LH/RH Heated Sport Mirrors FE1 Base suspension FE9 federal emissions GM3 3.45 Rear Axle Ratio (8.5 in. Ring Gear) IP3 Interior trim design P3 J55 Heavy Duty Brakes KG9 140 amp generator LT4 350 Cubic Inch, 330 Horsepower Engine ML9 manual 6speed, ZFtransmission MN6 6-Speed Manual Transmission NF2 Emission system, Federal, Tier 1 NG5 Fifty state ceritification emission registration NK4 Sport Leather Steering Wheel QB6 aluminum wheels 17 x 8.5" front, 17 x 9.5" rear R6E Control sales item 5 R7A Control sales item 26 special option processing R9Z Control sales item 100 UJ6 Low Tire Pressure Warning Indicator UU8 Delco Bose Stereo System UXO Dual Floor Sill & Extended Range Speaker System U52 Electronic Instrument Cluster U75 Power Antenna VM3 information label, bumper impact standards V73 Vehicle statement, US or Canada WY5 Tires, Extended Mobility XFR Front tire P255/45 ZR17, EMT YFS EMT rear tire P285/40 ZR17 1AZ Modification stock order or order sold 1SB Marketed option package 2 45U Polo green metallic 64I Light beige interior trim |
Originally Posted by jtelder21
(Post 1593184597)
AG1 Power Driver Seat
AG2 Power Passenger Seat AK5 Front seat S.I.R. system (driver & pass.) 9496 AR9 Base Leather Seats BGR Bowling Green assembly plant CF7 Removable Roof Panel (Solid Body Color) C68 Electronic Climate Control DL5 roadside service information decal DL8 LH/RH Heated Sport Mirrors FE1 Base suspension FE9 federal emissions GM3 3.45 Rear Axle Ratio (8.5 in. Ring Gear) IP3 Interior trim design P3 J55 Heavy Duty Brakes KG9 140 amp generator LT4 350 Cubic Inch, 330 Horsepower Engine ML9 manual 6speed, ZFtransmission MN6 6-Speed Manual Transmission NF2 Emission system, Federal, Tier 1 NG5 Fifty state ceritification emission registration NK4 Sport Leather Steering Wheel QB6 aluminum wheels 17 x 8.5" front, 17 x 9.5" rear R6E Control sales item 5 R7A Control sales item 26 special option processing R9Z Control sales item 100 UJ6 Low Tire Pressure Warning Indicator UU8 Delco Bose Stereo System UXO Dual Floor Sill & Extended Range Speaker System U52 Electronic Instrument Cluster U75 Power Antenna VM3 information label, bumper impact standards V73 Vehicle statement, US or Canada WY5 Tires, Extended Mobility XFR Front tire P255/45 ZR17, EMT YFS EMT rear tire P285/40 ZR17 1AZ Modification stock order or order sold 1SB Marketed option package 2 45U Polo green metallic 64I Light beige interior trim |
Borla Q.
Originally Posted by jtelder21
(Post 1591364847)
Mods:
K&N intake Borla exhaust removed saggy headliner History: Bought the car in 2012, when it had 90k miles. I am the third owner (I think), and I was told it had been garaged previously. Since having it, I have had it garaged most of the time. Barely worn Continental ExtremeContact DW tires installed in 2014, and the front-right tire-pressure sensor that got mauled. I might try to sue the dealer in small claims, but I've never done that. New parts: accessory belt rear wheel bearing assemblies clutch slave cylinder KYB adjust-a-shocks (not yet installed) new headliner materials (not yet installed) https://cimg1.ibsrv.net/gimg/www.cor...da21bc18ed.jpg Do you have the drone effect with the Borlas? |
Re: Borla Q
There is some droning, but I'd consider it minor. The car cruises pretty quietly in 6th at 75mph. If you're not cruising, it sounds great!
Originally Posted by ZakC4
(Post 1593311541)
Do you have the drone effect with the Borlas?
|
exterior photos
https://cimg2.ibsrv.net/gimg/www.cor...92ac93d8a0.jpg
https://cimg7.ibsrv.net/gimg/www.cor...186ac4b82b.jpg https://cimg2.ibsrv.net/gimg/www.cor...fd1bec082e.jpg https://cimg4.ibsrv.net/gimg/www.cor...baa132a5b5.jpg https://cimg5.ibsrv.net/gimg/www.cor...98dd6180fb.jpg https://cimg7.ibsrv.net/gimg/www.cor...9144084b40.jpg |
now $8500
|
Yes, it is still available
Originally Posted by Da Wiz
(Post 1593264291)
I'm looking for another Polo Coupe. Really miss mine. Is this car still available?
|
I would love it for this car to go to a good home. It's still available, but now 8000!
|
Still available?
Hey,
I'm guessing that this car is still available since it appeared at the top of the for sale postings and had today's date on the post but the older dates were from 2016 and before. Has it ever been wrecked or is it rebuilt? Did you do the carpeting job yourself in the hatch area? Has anything else been done that is on the list as having the material but not done yet? And don't bother with small claims court, at least in Oklahoma the things you can be reimbursed for are very limited, you might get the replacement cost of the tire air valve but not extra things such as pain and suffering etc. It would be better if you could get that dealer or business to replace the part and let it go at that, at least over here is how it would be best, I know the law is different everywhere. I'd be interested in finding out more about it, is the headliner still not done? Any newer pictures other than those from 2016? I've inquired about a couple of cars on the listed for sale but have yet to hear back, not my day for replies I guess, lol. Good luck with the sale also! Thanks very much, |
Hey Bostock, I sent you a pm also. The car is still available, never wrecked or rebuilt. I haven't done anything with the carpet. The headliner is not done, but I still have the materials. The photos are accurate to it's present condition, but can send any pics of special areas if you want.
Best regards, |
Also interested
|
How can I update the title of the thread to reflect the new price?
|
| All times are GMT -4. The time now is 06:00 AM. |
© 2024 MH Sub I, LLC dba Internet Brands