Dallas, Texas shops
Anyone know a good shop in Dallas area that does aftermarket front splitter, side, and spoilers installation for a reasonable prices for the C7? Thanks:flag:
|
Check the right side of this page.....CF Vendors are listed. You have two very good people in the DFW area to go to; 21MC, talk to John Page or LG Motorsports, ask for Anthony :cheers:
|
Just out of curiosity, is there a reason why you don't want to tackle the install job yourself? It's a wiz-bang EZ install; might take 30 minutes to an hour for all three items.....pending using a lift or jack stands. :cheers:
|
Originally Posted by hisvett
(Post 1591600305)
Just out of curiosity, is there a reason why you don't want to tackle the install job yourself? It's a wiz-bang EZ install; might take 30 minutes to an hour for all three items.....pending using a lift or jack stands. :cheers:
|
Originally Posted by hisvett
(Post 1591600274)
Check the right side of this page.....CF Vendors are listed. You have two very good people in the DFW area to go to; 21MC, talk to John Page or LG Motorsports, ask for Anthony :cheers:
|
You could check with Corvette World.
|
Originally Posted by jamesw95
(Post 1591602895)
You could check with Corvette World.
|
Call 21st Century Muscle Cars... Matt... Located just north of Beltline on Midway. Tremendous work on Vettes... Have done a ton of engine modifications on mine and I am scheduled in to do the very work you asked about in two weeks.
|
If you are in the Addison, TX area, 21st Century is right on Midway by the airport. They have done work on several of my Corvettes. Never an issue.
|
Originally Posted by krazyyellowt
(Post 1591596794)
Anyone know a good shop in Dallas area that does aftermarket front splitter, side, and spoilers installation for a reasonable prices for the C7? Thanks:flag:
|
I've had LG Motorsports in Plano work on my Z06 and it's an eight hundred round trip drive for me, but well worth it to have a shop that knows Corvettes, work on my car.
|
What side of the Metro-Plex do you live on.....perhaps a member of LSCC or would like to join....PM me, Mike
|
Originally Posted by hisvett
(Post 1591607498)
What side of the Metro-Plex do you live on.....perhaps a member of LSCC or would like to join....PM me, Mike
|
Our splitter and side skirts are pretty easy to do. The front goes on with hardware already in the nose so it is pretty much a bolt on piece.
The rockers use four bolts already there and you have to drill for 3 rivets per side. Takes a little time to line them up, drill, remove, clean, then install but not long. Customer did a killer write up on the side skirt install http://netwelding.com/Side_Skirts.pdf I have both pieces in stock, can ship, you can pick up, or we can install them for you. Let me know if you have any questions. :thumbs: |
Install
Call Dave at DMS Corvette on Sheppard St near Forest and Plano Road in Garland.
|
LG would get my vote.
|
Dedicated Motorsports sports just moved from Round Rock to West Ft Worth. I would highly recommend them to anyone with a C6, C7, CTV, ZL1, ZR1, GTR, etc. The owner, Matt Owen does incredible fab work and is a fantastic tuner for these platforms... He did my recent build and I am 100% satisfied with his work and tuning.... |
Also Carr's Corvettes & Customs over in Plano.
They installed my lowering bolts. |
Originally Posted by hisvett
(Post 1591600274)
Check the right side of this page.....CF Vendors are listed. You have two very good people in the DFW area to go to; 21MC, talk to John Page or LG Motorsports, ask for Anthony :cheers:
|
Originally Posted by MikeyTX
(Post 1591603985)
If you are in the Addison, TX area, 21st Century is right on Midway by the airport. They have done work on several of my Corvettes. Never an issue.
:iagree: I just used them for my LS9 engine project...see my thread in the ZR1 section discussing cylinder head/valve-train replacement. |
All times are GMT -4. The time now is 06:52 AM. |
© 2024 MH Sub I, LLC dba Internet Brands