Doing some mock up tonight. Looks like it will mount off the A&A Procharger bracket with no issue. I am just making a bracket out of a straight 1 1/2" wide scrape I had laying around. What I did find was to make the turn from the oil fill AN adaptor was to close. I could make it work with a long loop but it will be ugly. Now the thought would be to change and pull from the drivers side (make dirty) -10 port and make the clean side come -10 welded on valve cover to blower inlet. That way I can run straight forward and T of the valley port on the way. I will call mm to confirm before moving forward.
https://cimg3.ibsrv.net/gimg/www.cor...119443b627.jpg https://cimg5.ibsrv.net/gimg/www.cor...f07557743f.jpg |
All times are GMT -4. The time now is 02:10 PM. |
© 2024 MH Sub I, LLC dba Internet Brands