Where to find these wheels ?
 

https://cimg3.ibsrv.net/gimg/www.cor...5bbc999db4.jpg
<posted this in the wheels section as well>

I know this pic is not real, but want to buy these wheels.

Anyone know who makes wheels like this ?

Wheels similar to that on the c-3 forum.

Link to discussion thread ?

I'm not sure that picture is even real. It doesn't look like it.
If you have to have them and spare no expense a company like EVOD can build them.
Bring your check book though.

Where to find these wheels ?
 

i believe they may be old ET vector wheel.. haven't seen those in years. had some or real close on my 67 impala. wow over 40 years ago..

Those aren't Vectors. It's a modern take-off on the Vector idea, but those wheels are huge and the "ribs" come down and stop, leaving an outer "hoop." The old Vectors took the rib design, which was apparently borrowed from the knockoffs, all the way to the wheel edge.

I agree that the photo looks like a mock up and the wheels don't look real. Interesting idea, though.

Anyone have a picture of the old Vectors for comparison ?

The ones in the pic I posted are digitally rendered / not real.

I'm looking for the closet version I can buy, just haven't found who makes similar ones (in this size).

Front: P265/50R15
Rear: P295/50R15

And my '64 has flared fenders as well - so looking to mount / fit so that the wheel edge isn't radically inset or protruding from the body.

Where to find these wheels ?
 

i just did a google search on et vector wheels and they will show up .. similiar not same. i personally still like the wheel and have a version on my 14 f150 now

These ?

Where to find these wheels ?
 

nope i was just reading up on how to post pic. akhvintage.com scroll down they look as if they even have some inventory in alluminium the western cyclone II . r even closer to the look or dan gurney turbine hurricane wheels

These ?

turbine cyclone
 

they are turbine cyclones. there a number of different sizes and types for make and model.
I think there E.T or western

cool cyclones
 

then there's these

theres these
 

and so on, and so on...

these are close
 

with smooth cap these would look nice

The original Corvette knock-off wheel was 15x6 and there have been reproductions forever but quite awhile back there was a 15x8 version built for the C3's. It's been awhile, maybe there's a set on eBay or Craigslist somewhere.

Ray

Who sells these ?!?

They look like they've been made recently (vs. in the 60's / 70's).

I had what I thought were Vectors on my custom'73 around 1982, and also a similar turbine with painted inserts for a short period on a custom '80 around 1987.

ill try
 

ill try n find out for you they are pretty nice.

heres your rims and answer
 

the ones above you are referring to are ET's and ET II's
then there's Permacast on bottom pic with a cool 70's truck
Good luck, Ed