Oil Pan "6 QT" Special high performance $275.
 

SOLD I have a "6 Qt", long sump, trap door oil pan intended for the "Special high performance" small block 63-65 solid lifter, fuel injected and no P/S LT1. Nice paint, only a few tiny nicks, ready to bolt up and includes bolts. This is a very nice pan, beat up rusty ones have sold for more. No repairs, No welds, No bondo, minor dents as seen, Good drain plug and threads.
$275. plus 15. shipping. PM or email toylman@aol.com. Located in Nazareth, PA 18064. Pick up welcome. Also listing on C2 parts. Thanks, Lenny

https://cimg1.ibsrv.net/gimg/www.cor...31d1a597a7.jpg

https://cimg2.ibsrv.net/gimg/www.cor...3b4d0f8447.jpg

https://cimg3.ibsrv.net/gimg/www.cor...e74e6faec9.jpg

https://cimg4.ibsrv.net/gimg/www.cor...b1e79f9d01.jpg

https://cimg5.ibsrv.net/gimg/www.cor...d2ebc5ab31.jpg

https://cimg6.ibsrv.net/gimg/www.cor...5a4eec7b65.jpg

https://cimg7.ibsrv.net/gimg/www.cor...d96cddade2.jpg

ttt

lower price

Do you need an extended pick up screen for the pump?

I am not sure since I don't have a base pan to compare. I think the 7" height of the pan is the same as a base and it gains the extra volume from the larger 14" long sump

I didn't want to disturb the stock oil pump/screen

Pan takes normal Corvette pick up.....all small block pick ups for corvettes are the same.

This is true......although they are different than a passenger car pickup.

Jebby