Raced a terminator today!!!
I was on my way home and a maroon terminator pulled up next to me at the light. Revved his car and it was crazy loud!! :eek: It had to have at least an exhaust, it sounded amazing! My car is 03' Z with VR intake only!
Well, I pulled around and behind him and got in front of traffic then pulled over next to him and slowed down a bit. I noticed he had a double piller pod on his car, so he had to have something to give more than the 10lbs of boost. Maybe just a pulley, who knows! 1st run was from 3rd at about 45mph and I thought I was gonna lose. I pulled him pretty hard all the way through 3rd and even harder in 4th. 2nd run was from 3rd again and same result. I pulled at least 4-5 cars on him. last run we pulled off on a side road and started in 2nd. I spun a bit and got traction, but he was pretty close with me. 3rd I started to pull a bit till I hit the top of 3rd, and in 4th I pulled on him hard. I'm impressed with this car!! 3rd and 4th are no joke!!! This car pulls so hard up top its insane. Had fun and the guy was pretty cool. We went our separate ways, he waved and gave me a thumbs up. Would have been cool to talk with hm a bit and find out what was on his car. It was beautiful. No Corvette though. :thumbs: |
Originally Posted by 00__Vette
(Post 1594109463)
I was on my way home and a maroon terminator pulled up next to me at the light. Revved his car and it was crazy loud!! :eek: It had to have at least an exhaust, it sounded amazing! My car is 03' Z with VR intake only!
Well, I pulled around and behind him and got in front of traffic then pulled over next to him and slowed down a bit. I noticed he had a double piller pod on his car, so he had to have something to give more than the 10lbs of boost. Maybe just a pulley, who knows! 1st run was from 3rd at about 45mph and I thought I was gonna lose. I pulled him pretty hard all the way through 3rd and even harder in 4th. 2nd run was from 3rd again and same result. I pulled at least 4-5 cars on him. last run we pulled off on a side road and started in 2nd. I spun a bit and got traction, but he was pretty close with me. 3rd I started to pull a bit till I hit the top of 3rd, and in 4th I pulled on him hard. I'm impressed with this car!! 3rd and 4th are no joke!!! This car pulls so hard up top its insane. Had fun and the guy was pretty cool. We went our separate ways, he waved and gave me a thumbs up. Would have been cool to talk with hm a bit and find out what was on his car. It was beautiful. No Corvette though. :thumbs: |
Originally Posted by bwill03z
(Post 1594109638)
Awesome, sounds fun. Now put some long tubes on that car with a tune and you will embarass him even more next time! I will admit those cars do sound amazing!
|
Originally Posted by bwill03z
(Post 1594109638)
Awesome, sounds fun. Now put some long tubes on that car with a tune and you will embarass him even more next time! I will admit those cars do sound amazing!
|
Originally Posted by MY03C5Z
(Post 1594109946)
I had the VR as my only hp mod for a few years, definitely pulled harder especially in 3rd & 4th with it. Added LT's and a tune for both mods last year and wow, what a difference. This should have been a factory option, car sounds and feels nearly perfect with them. VR, LT's, tune and a better shifter are the four must haves for a c5z imo.
I want to swap that thing out for an RXT. I managed to run 12.2 @ 115mph with the VR only, so I'm sure I can hit 11's with a new clutch and some DR's. And then with LT's and a tune like you suggest, I can't imagine how much that would drop my ET. Love this car!!!:rock: |
Originally Posted by 00__Vette
(Post 1594109809)
Thanks man, yeah.. I have the money for some headers right now but I want to do the clutch first. I figure, I'm going to need it and it would be better to do it before headers. So after I can get that done, then headers is the very next mod! :thumbs:
|
Originally Posted by bwill03z
(Post 1594110068)
Sounds like a good plan! What clutch are you getting? My next purchase will be a clutch, then new cam! :D
If you added a clutch and a good cam, your car is going to enter another class. After running that cobra today on a nearly stock car, and yours has so much more.. damn!! That's all that comes to mind. :thumbs::cool::cool::cool: |
Originally Posted by 00__Vette
(Post 1594110104)
I'm pretty set on the mcleod RXT. Lots of rave reviews, and the price is pretty reasonable as far as clutches go.
If you added a clutch and a good cam, your car is going to enter another class. After running that cobra today on a nearly stock car, and yours has so much more.. damn!! That's all that comes to mind. :thumbs::cool::cool::cool: |
Originally Posted by bwill03z
(Post 1594110472)
Yeah I've heard good things on it as well. I definately love the way my car runs now but I also love the sound of a cam, plus more power is never a bad thing! A cam will put me over 400rwhp so I don't think I could get by on the stock clutch.
Yeah, your gonna need a clutch.. especially if you get some sticky tires!!! |
03-04 Terminators are great cars... however, they are pigs compared to your C5Z... Its no wonder you pulled on him. I am pretty confident that his wasn't modded... Very nice.
|
Probably only exhaust and an aftermarket gauge if you pulled him like that. These C5Zs have the advantage over 60mph against a 2003/2004 Cobra due to aerodynamics with air resistance. They are the most aero Corvette ever designed due to the rounded front. The regular C5s are actually faster at top speed due to the angled rear hatchback window. The Cobras weigh about 2600lbs so we have a 500lb advantage too. A KB or Whippled Cobra should take a slightly modded C5Z in the 1/4 but not over it.
|
Originally Posted by WannaC5Z
(Post 1594114914)
Probably only exhaust and an aftermarket gauge if you pulled him like that. These C5Zs have the advantage over 60mph against a 2003/2004 Cobra due to aerodynamics with air resistance. They are the most aero Corvette ever designed due to the rounded front. The regular C5s are actually faster at top speed due to the angled rear hatchback window. The Cobras weigh about 3600lbs so we have a 500lb advantage too. A KB or Whippled Cobra should take a slightly modded C5Z in the 1/4 but not over it.
Other than that, agreed. |
WTF is that guy talkin about...!!:crazy2: 03-04 Cobra @ 2600lbs....
Try 3700lbs.....
Originally Posted by NosLaser
(Post 1594115087)
Fixed :D
Other than that, agreed. |
Dude... Where do you get this wealth of knowledge...?:lol:
Originally Posted by WannaC5Z
(Post 1594114914)
Probably only exhaust and an aftermarket gauge if you pulled him like that. These C5Zs have the advantage over 60mph against a 2003/2004 Cobra due to aerodynamics with air resistance. They are the most aero Corvette ever designed due to the rounded front. The regular C5s are actually faster at top speed due to the angled rear hatchback window. The Cobras weigh about 2600lbs so we have a 500lb advantage too. A KB or Whippled Cobra should take a slightly modded C5Z in the 1/4 but not over it.
|
So with this information we can summize that the C5Z's only weigh 2100lbs???:willy: Holy shit, now I wish I would not have sold mine!!!
Originally Posted by WannaC5Z
(Post 1594114914)
Probably only exhaust and an aftermarket gauge if you pulled him like that. These C5Zs have the advantage over 60mph against a 2003/2004 Cobra due to aerodynamics with air resistance. They are the most aero Corvette ever designed due to the rounded front. The regular C5s are actually faster at top speed due to the angled rear hatchback window. The Cobras weigh about 2600lbs so we have a 500lb advantage too. A KB or Whippled Cobra should take a slightly modded C5Z in the 1/4 but not over it.
|
Originally Posted by 0H1Z06
(Post 1594115817)
Dude... Where do you get this wealth of knowledge...?:lol:
Originally Posted by 0H1Z06
(Post 1594115852)
So with this information we can summize that the C5Z's only weigh 2100lbs???:willy: Holy shit, now I wish I would not have sold mine!!!
|
Originally Posted by 0H1Z06
(Post 1594114856)
03-04 Terminators are great cars... however, they are pigs compared to your C5Z... Its no wonder you pulled on him. I am pretty confident that his wasn't modded... Very nice.
I'm guessing Pulley and exhaust at a minimum. |
Originally Posted by WannaC5Z
(Post 1594114914)
Probably only exhaust and an aftermarket gauge if you pulled him like that. These C5Zs have the advantage over 60mph against a 2003/2004 Cobra due to aerodynamics with air resistance. They are the most aero Corvette ever designed due to the rounded front. The regular C5s are actually faster at top speed due to the angled rear hatchback window. The Cobras weigh about 2600lbs so we have a 500lb advantage too. A KB or Whippled Cobra should take a slightly modded C5Z in the 1/4 but not over it.
It was at MIR too which has great track prep and is known for outstanding DA. |
I guess I'm the only one here wondering why you both started in 3rd at 45mph?
|
Originally Posted by Milehigh JDF
(Post 1594117315)
I guess I'm the only one here wondering why you both started in 3rd at 45mph?
|
All times are GMT -4. The time now is 02:31 AM. |
© 2024 MH Sub I, LLC dba Internet Brands