Put my Forgestars on and here are some pictures
 

https://cimg0.ibsrv.net/gimg/www.cor...6a7e7e3a88.jpg

https://cimg1.ibsrv.net/gimg/www.cor...823fb9f5cc.jpg

https://cimg2.ibsrv.net/gimg/www.cor...e9c0d0005b.jpg

https://cimg3.ibsrv.net/gimg/www.cor...aeb95c0f32.jpg

https://cimg4.ibsrv.net/gimg/www.cor...c894bfbe3d.jpg

https://cimg6.ibsrv.net/gimg/www.cor...04d9cbe1a9.jpg

https://cimg7.ibsrv.net/gimg/www.cor...234b7c89f8.jpg

https://cimg8.ibsrv.net/gimg/www.cor...a5a49009e8.jpg

https://cimg9.ibsrv.net/gimg/www.cor...0bd839ee8d.jpg

https://cimg0.ibsrv.net/gimg/www.cor...8304c4f49d.jpg

https://cimg1.ibsrv.net/gimg/www.cor...0c48e5262c.jpg

https://cimg2.ibsrv.net/gimg/www.cor...9d229e67d5.jpg

https://cimg4.ibsrv.net/gimg/www.cor...19fabe66e3.jpg

https://cimg5.ibsrv.net/gimg/www.cor...387f160d8b.jpg

https://cimg8.ibsrv.net/gimg/www.cor...33740af62e.jpg

https://cimg9.ibsrv.net/gimg/www.cor...673446d1e2.jpg

https://cimg0.ibsrv.net/gimg/www.cor...d8b9cef6b7.jpg

https://cimg1.ibsrv.net/gimg/www.cor...21daa3eb2c.jpg

Looks great! :thumbs:

Looks proper!

nice

Looks great! :cheers::cheers:

^^^^ Ditto! :thumbs:

What a beauty of a pup! Oh, and nice wheels too!

Did the doggie pee on the wheels? I'd not be happy!

She's a female thus no lifting the leg to P on the tires plus she knows better :D

That looks killer! The textured black looks great on the black and gives a nice aggressive/rugged look

Thanks but they are actually textured bronze

Looks really good, but I liked your other wheels better.


Shakey

I like the wheels, but... I don't care for the color combo. They appear to have too much back spacing (rears) or maybe they're 12"? Those stick out more than my 325s on 11"x19" rears by about an inch. IMO, it'd look better with 35 series on the back, too. Nice pictures. Love your girl. :thumbs:

I like them! :thumbs::thumbs:
I'm looking at the first side shot, and am thinking like the wheels, no BSM's, nice BB's... then it hits me, why is it sitting so high?
When I got to the first rear/ side shot, I knew. :lol:

What are the specs on the rear W/t?

frank :canadaflag:

They look great! Now lower that beast. :thumbs:

It's been lowered on stock bolts and aligned to factory spec but the reason for the tire gap is from when I put the wheels on the suspension was unloaded and unspung. As soon as I put the wheels on our Michigan weather went south and turned sh!tty therefore, I have not had a chance to drive it. After some spirited driving the Z should settle down to its lowered ride height. Better pics to follow

19 x 11 w/55mm offset
Bridgestone Potenzas S-04 Pole Position Tires 305/30/R19's

https://cimg5.ibsrv.net/gimg/www.cor...f435da4f8f.jpg

https://cimg7.ibsrv.net/gimg/www.cor...3d42af9852.jpg

He can't, since his wheeels/tires are past the fender lip, depends how much, but if he will be hittin the pothole from hell, be kissing those fenders goodbye.

frank :canadaflag:

The question is how did Forgestar get the rear offsets wrong?

I don't think the offsets are wrong I've looked at other rims/manufactures and that is what they recommend for a 19 x 11 wheel. Again, once I drive it and it settles down they may not be poking out as much as it is now.

Update... after speaking w/ Jake @ PK I am going to have it realigned and induce a -0.5 degree negative camber to take advantage of the wider wheel and tire combo. This will allow me to utilize more of the wider tire and that will pull the top of the wheel/tire inward. As it stands now, my Z was lowered on the OE bolts yet I had it aligned to OE specs. So it makes sense why the new setup 'pokes out' more than my previous setup consisting of the 10.5" wide TSW Interlagos w/ the 295 tires.