02 c5 z06?
how can i tell if it has a z06 package
|
Write down the VIN # and enter it into carfax.com or autocheck.com.
|
If it's an 02 and an FRC, it's a Z. Why the doubt?
|
Originally Posted by grantv
(Post 1594973575)
If it's an 02 and an FRC, it's a Z. Why the doubt?
|
Originally Posted by MY03C5Z
(Post 1594975189)
Exactly, pretty tough to fake an 02 model year frc car. Only thing that worried me about mine when I bought it was if it was an ls6, I was concerned it could have been replaced at some point by a base ls1. Easy to see the 243 head stampings, that's one way to confirm it has an ls6. That's still no guarantee but it's a pretty safe bet imo.
|
Originally Posted by MY03C5Z
(Post 1594975189)
Exactly, pretty tough to fake an 02 model year frc car. Only thing that worried me about mine when I bought it was if it was an ls6, I was concerned it could have been replaced at some point by a base ls1. Easy to see the 243 head stampings, that's one way to confirm it has an ls6. That's still no guarantee but it's a pretty safe bet imo.
|
Originally Posted by glbeauchamp
(Post 1594975503)
Where exactly would one look to see this 243 stamp on the heads?
https://cimg8.ibsrv.net/gimg/www.cor...e737872c73.jpg https://cimg9.ibsrv.net/gimg/www.cor...87de98673c.jpg |
Originally Posted by grantv
(Post 1594975262)
Yep... a while back a member found out his Z had a base motor. Wonder what ever happened with that.
|
The passenger side head, up front will be the most visible for the stamping.
|
Originally Posted by mykream
(Post 1594976747)
The passenger side head, up front will be the most visible for the stamping.
|
I've seen two C6Zs in the Tulsa area with wet sump ls2/3 motors...Neither advertisement stated that. You can't be too careful!
|
Originally Posted by C5SCCA
(Post 1594979991)
I've seen two C6Zs in the Tulsa area with wet sump ls2/3 motors...Neither advertisement stated that. You can't be too careful!
|
Originally Posted by MY03C5Z
(Post 1594980085)
I knew that was going to start happening with the c6z's. With all the head problems and engine failures out there combined with the cost of an LS7 crate engine, people were bound to start replacing them with LS2/3's. Talk about being screwed over buying one of those! That would seriously suck...
|
Originally Posted by grantv
(Post 1594981208)
...and pretty much no legal recourse. After all, it is still a Z06. That'd be a tough fight.
|
All times are GMT -4. The time now is 10:17 AM. |
© 2024 MH Sub I, LLC dba Internet Brands