Best ported heads for power
Looking for cost to HP in this case with ported ls7 heads AHP can port heads for 800$ only one I know of as right now. Is there any other company that has better heads for around the same price? And what do I expect ported heads? I have a btr4 cam and getting a ported msd
|
You will get every answer in here with a question like that.
For ported stock LS7 castings I have seen best power with either WCCH or AI. Best power period without budget Mamo 265s or Mast |
Originally Posted by lt1z
(Post 1595478600)
You will get every answer in here with a question like that.
For ported stock LS7 castings I have seen best power with either WCCH or AI. Best power period without budget Mamo 265s or Mast Lol Hey Matt I'll call wcch |
1 Attachment(s)
Originally Posted by CammedC6520
(Post 1595478498)
Looking for cost to HP in this case with ported ls7 heads AHP can port heads for 800$ only one I know of as right now. Is there any other company that has better heads for around the same price? And what do I expect ported heads? I have a btr4 cam and getting a ported msd
CammedC6520, Our heads cam intake LS7 cars are throwing down over 600+ horse and 550+ torque to the tire on 93. If you're looking for a package deal or need your heads ported/fixed, give me a shout! Good luck on your build! -Russ |
Originally Posted by FrankensteinE.D.
(Post 1595479308)
Attachment 48201885
CammedC6520, Our heads cam intake LS7 cars are throwing down over 600+ horse and 550+ torque to the tire on 93. If you're looking for a package deal or need your heads ported/fixed, give me a shout! Good luck on your build! -Russ My heads are AHP milled and fixed I just need porting how much do you charge for porting only? |
Originally Posted by CammedC6520
(Post 1595479703)
My heads are AHP milled and fixed I just need porting how much do you charge for porting only?
-Russ |
Email Tony Mamo see what he can do with your stock castings. Always good to get multiple options and opinions.
|
..my buddy picked up I believe if I remember from a few months ago. 46 rwhp and 44 rwtq from his 280 AIs milled .020 IIRC. (has Torquer 110). 98 octane mix. Full Exhaust port picks up big flow with 1 7/8" LT's. Mill is big power if you have the gas. Car is a total beast now. :cheers:
|
If your looking for the best Darin Morgan hands down he can make a go cart head do whatever you want and flow very exceptionally, now you can get different heads out there and start from there.....you will get answers everywhere but unless your not concerned about money give Darin Morgan a call.....
|
Originally Posted by CammedC6520
(Post 1595479703)
My heads are AHP milled and fixed I just need porting how much do you charge for porting only?
|
He's 18 Joe... What do you expect...:lol:
Originally Posted by FSTFRC
(Post 1595536943)
Google is your friend
|
Originally Posted by FSTFRC
(Post 1595536943)
Google is your friend
Was asking you see if anything new came up that hadn't been brought up yet to other threads. |
Originally Posted by CammedC6520
(Post 1595538361)
Was asking you see if anything new came up that hadn't been brought up yet to other threads.
|
I'd go AI or Mamo, end of discussion.
That said, the OP has gone from H/C/I to a new motor to nitrous to a FI and now back to heads. Kinda like a dog chasing his tail...but the tail is smarter than the dog. |
Originally Posted by wantbluC6
(Post 1595538602)
Being nice kid and not condescending, you can only reinvent the wheel so many times. To the other guy. Try getting Darin Morgan to port a set of LS7 heads. Or try to just get a hold of him period. Not gonna happen. He doesn't need that. What (companies/people) that have been mentioned here is the best of the best and what the fastest guys use 99% of the time. :cheers:
I hate this iPhone with autocorrect |
Originally Posted by Millenium Z06
(Post 1595538627)
I'd go AI or Mamo, end of discussion.
That said, the OP has gone from H/C/I to a new motor to nitrous to a FI and now back to heads. Kinda like a dog chasing his tail...but the tail is smarter than the dog. Kinda sorta brotha, all my plans are still going to happen :) Fi and nitrous not together gonna have fun with the c6z platform then love over to c7 z when I'm ready |
Wes, this kid has more money than you....:rofl:
Originally Posted by Millenium Z06
(Post 1595538627)
I'd go AI or Mamo, end of discussion.
That said, the OP has gone from H/C/I to a new motor to nitrous to a FI and now back to heads. Kinda like a dog chasing his tail...but the tail is smarter than the dog. |
Originally Posted by 0H8Z06
(Post 1595538946)
Wes, this kid has more money than you....:rofl:
|
Whatever you decide to do I would definitely set your mind up on one thing with the motor.....and regardless who has more money than the other person you always listen and learn, others have been there done that in my case unfortunately I had to rebuild my motor.
If your heads are already done by AH Just send them there.... |
Originally Posted by 0H8Z06
(Post 1595538946)
Wes, this kid has more money than you....:rofl:
|
All times are GMT -4. The time now is 04:08 AM. |
© 2024 MH Sub I, LLC dba Internet Brands