1999 black FRC
 

Had lots of fun with this car, now time to move onto a different project. Car dyno'd 440whp and 400wtq. It's a great car and I drive it everyday there is no rain in the forecast, haha. I live in Minnesota so unless there are local guys on here I will ship it. $17,000 shipped to your door is what I'm asking but I am open to offers. Onto the good stuff. 6 speed with 69,xxx miles on the odometer. Trickflow Cast 220 heads, BTR stage 4 cam, Dorman LS2 intake with LS2 throttle body, Stainlessworks headers and x-pipe, Borla catback, Monster stage 3 clutch. All supporting mods with that also, LS7 lifters, LS2 trays, ARP head bolts, TF pushrods, Powerbond balancer with ARP bolt, 36lb injectors. Any questions holler at me or if you want specific pictures let me know. I have an idle video and 2nd gear burst video also. Thanks!!https://cimg0.ibsrv.net/gimg/www.cor...a114cbdfc7.jpghttps://cimg1.ibsrv.net/gimg/www.cor...6855e84b34.jpg
https://cimg2.ibsrv.net/gimg/www.cor...a169e3f8e7.jpg
https://cimg4.ibsrv.net/gimg/www.cor...4542794524.jpg
https://cimg7.ibsrv.net/gimg/www.cor...00a36828fb.jpg
https://cimg8.ibsrv.net/gimg/www.cor...637a4cd51b.jpg
https://cimg0.ibsrv.net/gimg/www.cor...1cf089c8fb.jpg

Dyno chart?

Honestly, not really sure where I put it. I do have a couple of threads documenting my journey with this vehicle tho if you wanted the check them out. Thanks

sorry for the mixup, they told me over the phone it was 401tq but now I looked at the sheet and it's 391. Thanks all!https://cimg7.ibsrv.net/gimg/www.cor...841b10d4d1.jpg

Ttt

Ttt

Aw man! Wish I was in the market to get one. This one would have been close enough for me to come and take a look at it :(.
GLWS!:cheers:

Thanks

$16800

Ttt

Can you post the video you reference of idle and second gear burst?

I don't know how to do a video. I'm kind of computer dumb. Pm me your phone number and I'll text ya. Thanks

Ttt

Ttt

a/c question
 

Is the air conditioning deleted?

No it is not

What's changed?

slapped the stage 4 in and ran it on the above dyno sheet to make sure everything was ok because the tuner was backed up a few months. Then I brought it to him in November for the current #s.