CorvetteForum - Chevrolet Corvette Forum Discussion

CorvetteForum - Chevrolet Corvette Forum Discussion (https://www.corvetteforum.com/forums/)
-   C3s for Sale/Wanted (https://www.corvetteforum.com/forums/c3s-for-sale-wanted-56/)
-   -   FS: 1976 T-Top Vette Project Car (https://www.corvetteforum.com/forums/c3s-for-sale-wanted/4051430-1976-t-top-vette-project-car.html)

rossiter76vette 10-06-2017 06:34 PM

1976 T-Top Vette Project Car
 
8 Attachment(s)
Hey everyone,
I've got a 1976 L-48 project car for sale. I purchased this car a little over 1.5 years ago and unfortunately have not had the time or money to put into getting her back running. I live in Mansfield Center, CT if you are interested in looking at the car. Below is a list of the things I have done so far to the car, things I have purchased for it and what I think is left to do. Let me know if you have any questions or would like to come take a look at it. I'm asking $2500 for the car but up for offers. I do have a couple of rubber bins full of interior parts which I have not gone though but was told it contains all of the interior components. I also have new rims and tires (not shown) that will come with the car as well. I hope this car can go to a good home that can get her back out on the road! If you want information call or text me (575)973-2808.

Already done to the car:
- Front Brakes (including rotors, calipers, pads, front wheel bearings, hard and soft lines, master cylinder and proportioning valve)

Purchased:
- Remaining hardware for the rear brakes (including rotors, calipers, remaining lines and all hardware to replace the parking brakes)
- Hardware to replace the rear suspension mounting hardware
- New lug nuts and door bolts

Remaining projects (that I know of):
- Finish the rear brakes
- Finish mounting the rear drivers side suspension
- Body work, including mounting the rear bumper cover
- Paint
- Interior needs to be updated

Thanks,
Raymond Rossiter

rossiter76vette 12-01-2017 04:51 PM

Price drop!!
 
Hey Everyone!
I'm dropping the price of this down to $3,000 cash. I've got all the parts to do full brakes all the way around as well as the lines. Looking for someone that has more room than I do, as I'd like to get my garage space back. Hit me up with any questions!

rossiter76vette 05-19-2018 02:59 PM

bump. Front brakes are complete and the rear is being disassembled to get the trailing arms rebuilt. Let me know if you have any questions or need any more pictures!

rossiter76vette 05-23-2018 08:00 PM

Alright everyone I’m dropping the price down to my bottom line due to needing to get a work truck for house projects. Hopefully later on in life I’ll get the chance to restore one of these beauties! Asking $2,500 now, comes with all the parts I’ve bought for it as well as two sets of rims and a couple buckets worth of interior parts. Let me know if you guys have any questions.

rossiter76vette 06-07-2018 09:22 PM

Bump, still for sale

CiCiC3 06-08-2018 02:52 PM

What's the story with the engine? Just stock 350? mileage?

rossiter76vette 06-08-2018 03:36 PM


Originally Posted by CiCiC3 (Post 1597365500)
What's the story with the engine? Just stock 350? mileage?

CiCi,
Has the original engine that came with the car, all looks original except I think the carb is a replacement because the date codes don't match up. Date codes on the block match up with the VIN. When I first got the car last year the engine turns right over no problem, just needs to be tuned to run right. Currently the oil pan has a leak so I haven't ran it in a little bit but should turn right over. The odometer shows 86K miles.

CiCiC3 06-09-2018 09:27 AM

Thanks for the info on that

rossiter76vette 06-09-2018 06:16 PM


Originally Posted by CiCiC3 (Post 1597369606)
Thanks for the info on that

Any other questions I can answer for you? You interested in looking at it?

rossiter76vette 06-30-2018 11:21 AM

Bump

rossiter76vette 10-30-2018 06:58 PM

Back to the top she goes, updated the description and what has been done!

rossiter76vette 12-04-2018 09:13 PM

ttt
grab yourself a good winter project!

rossiter76vette 12-29-2018 11:20 AM

ttt. Price reduced to $2000. Need the room in my garage to start my new business. Let me know if anyone is interested!

rossiter76vette 01-09-2019 09:36 PM

Ttt. Come grab a great deal and fun project! Trying to clean out the garage so I can start my new business!

FAUEE 01-12-2019 12:43 PM

How rusty is it? Solid frame or birdcage?

rossiter76vette 01-13-2019 08:55 PM


Originally Posted by FAUEE (Post 1598671637)
How rusty is it? Solid frame or birdcage?

Fauee, only surface rust. Solid frame and birdcage. Feel free to texts me @ (575)973-2808 with any other questions

rossiter76vette 01-24-2019 10:03 PM

Sold.

Tact 01-25-2019 09:42 AM


Originally Posted by rossiter76vette (Post 1598753642)
Sold.

:thumbs:


All times are GMT -4. The time now is 12:25 PM.


© 2024 MH Sub I, LLC dba Internet Brands