Originally Posted by Turpid porpoise (Post 1595732006)

I've stepped up to an RSI dual hanger so I don't need any of this stuff anymore. The AEM pump, ECS harness, hobbs switch and ECS fuel ring have only a few miles on them as I never really drove it before changing my setup yet again. I tested everything before removal and it all worked flawlessly.

AEM Pump, ECS fuel ring, harness and hobbs switch. Ill also include a 3/8" to 8AN adapter and a 8AN tee(female, male, male) that I used to tie into the OEM feed line on the firewall -$300.00 + shipping and fees

https://cimg1.ibsrv.net/gimg/www.cor...f655fff033.jpgFuel ring will be removed once my RSI hanger arrives.

Originally Posted by Turpid porpoise (Post 1595734668)

bump

Originally Posted by sabastian458 (Post 1595754736)

What's the lph of the AEM pump? And on the ring, the pump pulls from the fitting on the outside, but is there anything to go from the ring to the floor of the tank? (I'm assuming not from what all I can look up online, I'm curious how it pulls full of the fuel is sloshing about)