wheel bearing torx bolts specifications
After I had a local shop remove the ball joints and wheel bearings from my spindles, the torx bolts did not make it back, and can not locate them... I need at least 6 apparently. I still have to unwrap the rear axles to see what is there....
Does anyone have the specifications for them? Or alternatively some laying around they don't need? |
Originally Posted by srshaw3
(Post 1596427966)
After I had a local shop remove the ball joints and wheel bearings from my spindles, the torx bolts did not make it back, and can not locate them... I need at least 6 apparently. I still have to unwrap the rear axles to see what is there....
Does anyone have the specifications for them? Or alternatively some laying around they don't need? |
Originally Posted by AzDave47
(Post 1596428630)
The only torque spec my list has is the wheel hub mounting bolts at 96 lb-ft, but that sounds well beyond what a torx bolt would use.
I am looking for the bolt specification, it has a "torx" head :) I need size, or somewhere to order it. I saw one vendor had a kit but it seem a bit costly.... |
Originally Posted by srshaw3
(Post 1596428684)
Thanks, but not looking for torque specifications.
I am looking for the bolt specification, it has a "torx" head :) I need size, or somewhere to order it. I saw one vendor had a kit but it seem a bit costly.... |
Originally Posted by RichieRichZ06
(Post 1596434777)
The 3 torx bolts that hold the hub to the knuckle are 12x1.75x54. The GM part number is 10414261 if that helps.
|
All times are GMT -4. The time now is 12:32 PM. |
© 2024 MH Sub I, LLC dba Internet Brands