|
Originally Posted by blueray16
(Post 1596462428)
I suspect that swapping the new ZR1 bumper onto Z06 /GS will be a popular option to increase air flow/cooling. Once they become available.
|
Are you talking about the ZR1? If so I agree... but they obviously did that so it cools the rads better.
Originally Posted by Corgidog1
(Post 1596462738)
The thing sticking out of the center of the bumper totally ruins it.
|
That's a lot of money and work to put into just to make your C7 look like the new ZR1. Hopefully they'll be manufacturers that will make aftermarket front bumpers just like that so it will fit the existing Z06 and Grand Sport.
Originally Posted by DWS44
(Post 1596462757)
You'll about have to graft the entire front end to do so. The fenders were redesigned for widebody w/o spats which would keep the ZR1 front bumper from aligning with existing fenders. Also, the body lines of the new hood extend down into the new nose, which would keep the nose from aligning with the body lines of the existing hood.
|
This picture is definitely PhotoShopped. But if you look at the new ZR1, you see Aventador in the nose anyway!!
|
Looks nice, but not a fan!
|
Originally Posted by GrandSport223
(Post 1596461982)
Don't get me wrong I love the looks of my C7 GS as well. I just think this would be quite an attention grabber when you pull into a car show or gas station! Only to another Corvette person. Nobody else would know. It looks like a ZR1. |
Looks similar to the C7 Gran Veloce Front Bumper to me.
|
I like it. Looks nice |
Not for me...kind of analogous to putting a Corvette front bumper on a Pontiac Solstice...
|
I like it. :thumbs:
|
Originally Posted by GrandSport223
(Post 1596461261)
https://cimg6.ibsrv.net/gimg/www.cor...f8bf77161e.png
I'll always be a fan of Lamborghini. There just way too damn expensive for me. In my opinion this is what General Motors should've done to the Corvette. And really is it that much different looking than the ZR1? assuming some people on here don't like the looks of ZR1 either. |
Originally Posted by GrandSport223
(Post 1596463171)
Are you talking about the ZR1? If so I agree... but they obviously did that so it cools the rads better. |
Only time will tell
Originally Posted by Silver C7
(Post 1596466536)
I wonder if that front fascia will be specfic to the ZR1, or if all 2019 models will get the change?
|
Gag me with a spoon. :ack:
|
I could definitely make this bumper. Was considering something similar to this on the C67 conversion lower bumper but not a direct copy of the Lambo. Number of ways to do it but I think it would only take a day or two to get it fitting / roughed in.
|
sorry for the comparison but.....
.....it's a woman with breast enhancements, hard to take one's eyes off it but you know it's not what it should be, attractive but overdone....I think I'll stop here:D
|
If you could build a bumper like this I would be very interested in buying it. I think the Huracan bumper might be better suited for the C7.https://cimg1.ibsrv.net/gimg/www.cor...5277fa8e26.png https://cimg2.ibsrv.net/gimg/www.cor...2a706e95a4.png Its got the opening in the front to cool down the rads. I don't know why GM didn't do this to the ZR1. The centre grill to me looks... I don't know... just don't care for it. https://cimg4.ibsrv.net/gimg/www.cor...9c12ce7395.png QUOTE=Crazy Cowboy;1596711372]I could definitely make this bumper. Was considering something similar to this on the C67 conversion lower bumper but not a direct copy of the Lambo. Number of ways to do it but I think it would only take a day or two to get it fitting / roughed in.[/QUOTE] |
Darwin Pro has a similar Lamborghini bumper style front bumper.... https://cimg7.ibsrv.net/gimg/www.cor...92f525f6e7.png https://cimg8.ibsrv.net/gimg/www.cor...b408b6df73.png https://cimg9.ibsrv.net/gimg/www.cor...fe2b359893.png https://cimg0.ibsrv.net/gimg/www.cor...7076d1fad4.png I still like the photoshop Aventador bumper on the C7 better |
|
Very Ferrari Like!
|
| All times are GMT -4. The time now is 01:04 PM. |
© 2024 MH Sub I, LLC dba Internet Brands