9.76@139.89 with a 1.7 blower no cam or heads
 

I was able to go to Orlando for a track rental that the Cadillac Attack event was hosting yesterday before their event.

Mods are: E60 mix, 18% lower, fasterproms upper, faster proms expansion tank, phenolic spacers, texas speed 2" headers with x-pipe, ported blower, halltech intake, 103mm tb, alkycontrol dual nozzle meth kit. 18" forgeline rear wheels and Stock size forgeline 19" for the front. Car still has the stock heads and cam.

my two fastest passes are below:
DA for first pass was around +1500 ft and +1620 ft for the other.


https://cimg1.ibsrv.net/gimg/www.cor...9301e63b4d.jpg

Nice work! Consistent. What trans, and what tire combo?

Nice 60’ and congrats on the 9 sec slips

Amazing 60' and MPH.
your car is hauling ass.

Congrats!! That’s freakin flying..... run 9.70s for less then $5k in parts is phenomenal....

I assume Jeremy tuned it?

:iagree: :thumbs::thumbs: Robert

A8 , MT 325-35-18 Drag radial R

Yes and Lujan Motorsports in Miami put it together.

Great '60.

Awesome time.

circle D converter?

Stock converter.

Wow!!!

WOW. thats awesome

Launch technique ?

Congrats Albert, that 60ft tells me your getting everything right on the hit!
What axel shafts are in that thing?

Foot brake and loading the converter to around 1800 to 1900




I tried to push it to 2100 and it hooked but something happened it felt like it spun tire inside the car but from the video it looks like some sort of torque management issue. It did yank the tire of the ground.

still stock :crazy: Borrowed time .

Jeremy knows how to make these cars go down the track better then anyone...His tuning is ON POINT...

Only problem with him is, he is not in Houston.:D

Well done, this car is amazingly quick.:thumbs:

Nice time! I'm located in Orlando too and have the same setup for the most part..Stage 3 Fasterproms build/Jeremy Tune, minus the Meth, Lower pulley. Managed a 10.3.. Wish i was able to fit 18's in the rear.. Damn CCB's lol did you disconnect the front sway?