CorvetteForum - Chevrolet Corvette Forum Discussion

CorvetteForum - Chevrolet Corvette Forum Discussion (https://www.corvetteforum.com/forums/)
-   C5 Parts for Sale/Wanted (https://www.corvetteforum.com/forums/c5-parts-for-sale-wanted-53/)
-   -   FS: SLP Headers (https://www.corvetteforum.com/forums/c5-parts-for-sale-wanted/4103600-slp-headers.html)

MvP_LS2 02-17-2018 08:28 PM
SLP Headers
 
1 Attachment(s)
SLP headers for sale, came off an LS2 but will fit an LS1 or LS3 as well. 1 & 7/8ths. Need cleaned up a good bit, I can get them cleaner before shipping. $300 plus shipping. I'd expect them to be around $50 to ship so I'll call it $350 shipped. 🍻

03zo6Paiva 02-17-2018 09:43 PM
Hi are those long tube or shorty headers and will they ls6

MvP_LS2 02-18-2018 12:59 AM
Originally Posted by 03zo6Paiva (Post 1596615353)
Hi are those long tube or shorty headers and will they ls6
Long tube, yes they'll bolt right up to an LS6.

Dan Lashinsky 02-18-2018 01:10 PM
Part number
 
Originally Posted by MvP_LS2 (Post 1596614782)
SLP headers for sale, came off an LS2 but will fit an LS1 or LS3 as well. 1 & 7/8ths. Need cleaned up a good bit, I can get them cleaner before shipping. $300 plus shipping. I'd expect them to be around $50 to ship so I'll call it $350 shipped. 🍻
inner Hello, do you have a part number I can search or a link proving these will fit a 99 corvette without any modifications ? Thank you

redzg 02-18-2018 01:33 PM
Are those stainless, just with a patina? I think the patina adds character, and double up on the question of part number relative to a '99...

aerovette99 02-18-2018 02:51 PM
I have them on my 99 and LOVE them. Excellent price for a set of Long Tube headers. Absolute steal

Dan Lashinsky 02-18-2018 02:55 PM
Could you guys send me a link to where you can purchase the gaskets and what not for these. I will take them if I am first in line.

aerovette99 02-18-2018 02:57 PM
Get the original gm exhaust gaskets

Dan Lashinsky 02-18-2018 03:03 PM
Originally Posted by aerovette99 (Post 1596619214)
Get the original gm exhaust gaskets
i was just reading on theses d they say you needs a heat kit because they get close to wires and you need to re route stuff and also need to buy the SLP down pipes. Is all this true?

aerovette99 02-18-2018 04:18 PM
Nope. https://cimg6.ibsrv.net/gimg/www.cor...bad3f6aee0.jpg

MvP_LS2 02-18-2018 04:39 PM
I've got a brand new, never opened set of gaskets I'll include for another $20. No it doesn't take a lot of rerouting, headers are a bolt on mod. A lot of people upgrade their plug cables to MSD because they flex better and make it more convenient, but it is not required.

MvP_LS2 02-18-2018 04:40 PM
Originally Posted by aerovette99 (Post 1596619659)
Thanks for the help and the picture! 🍻

MvP_LS2 02-18-2018 07:30 PM
Originally Posted by redzg (Post 1596618715)
Are those stainless, just with a patina? I think the patina adds character, and double up on the question of part number relative to a '99...
Yes, just used, but in great shape. No dings or dents. Not sure on the part number but if you just do a quick search you'll find that LS1, LS2, LS3, LS6 (and I'm pretty sure LS7 also) all use the interchangeable headers. I can guarantee that these will bolt to your car with no issues whatsoever.

Dan Lashinsky 02-18-2018 10:22 PM
Ok thank you, I did find part numbers and the newer ls2 motors and not up have a different location for the vent tube. I’m sorry for all the questions. These should mock up to my factory cats with cutting the stock pipes too right? I am looking between these and Texas speeds long tube headers and kind of torn!

MvP_LS2 02-18-2018 11:09 PM
Originally Posted by 88blackvette (Post 1596621818)
Ok thank you, I did find part numbers and the newer ls2 motors and not up have a different location for the vent tube. I’m sorry for all the questions. These should mock up to my factory cats with cutting the stock pipes too right? I am looking between these and Texas speeds long tube headers and kind of torn!
I'd recommend going to an aftermarket x-pipe just to get all the gains you could, but yeah you shouldn't have any problems running them with the rest stock still as far as I know. When I did mine I did the x pipe too, though.

As far as SLP vs TSP it's hard to say, but they'd probably end up about the same. But you should buy mine ;)

MvP_LS2 02-19-2018 12:54 PM
Bump. I'll do $360 with shipping included and include the gaskets.

redzg 02-19-2018 08:24 PM
Oh heII that's too good to pass up. PM sent.

MvP_LS2 02-20-2018 02:13 PM
Pending sale, no payment received yet. First come first served. Will post when they're sold. Thanks everyone for the interest. All PMs replied to.

MvP_LS2 02-20-2018 08:58 PM
Sold!


All times are GMT -4. The time now is 12:12 PM.


© 2024 MH Sub I, LLC dba Internet Brands