I hate my car. Nothing seems to go right.
Feeling defeated yet again with this stupid car. I swear I should have just bought a super low mileage ZR1. I decided to get new rims. The first shop that mounted my rear rims put deep gouge marks all along the inner rim. That was a couple days ago. I used touch up paint to fix but not happy. Those were 345 NT05R. Now today I tried to have my front rims mounted at an other shop. 285/30/19’s they could not get them mounted. In the process they chipped the powdercoat on from lip and scratched both the rims on inner wheel. Is all this normal? Now I have to send the rims out to get fixed. So irritated. Not sure if I should just leave backs alone or fix also. I know it going to cost me a lot. https://cimg3.ibsrv.net/gimg/www.cor...5d14d5f8b.jpeg https://cimg4.ibsrv.net/gimg/www.cor...1b3e84880.jpeg |
|
Makes no sense to hate your car due to the fact you used brain deficient tire installers.
|
Uhhhh what.....
|
Originally Posted by saplumr
(Post 1596622135)
Makes no sense to hate your car due to the fact you used brain deficient tire installers.
|
Originally Posted by chassed
(Post 1596622272)
Uhhhh what.....
|
I can share that I drive 40 miles one-way in Atlanta traffic to pay a Porsche specialty shop 50 bucks per wheel just to mount and balance. Whatever magic sauce they have, it works - the set are completed with no extra time, drama or scratches of any kind.
Prior to accepting this reality, I tried Discount Tire (I still have them do all my daily driver wheel and tire work); after they spent over 3 hours trying to get the top beads to seat on the Cup2's, they eneded up refunding my money and (on their dime BTW) pay 800 dollars to re-powder coat the rims. So no, not exactly a unique experience. Find a better shop (if you can) and try to get the other shop to compensate you. :cheers: |
Originally Posted by saplumr
(Post 1596622135)
Makes no sense to hate your car due to the fact you used brain deficient tire installers.
Go in and speak with the manager or the owner and show him what his installers did to your brand new rims. They need to reimburse you for replacement or powder coating etc....whatever it takes. See if they have good rating on Yelp etc....a scathing review is (occasionally) an effective bargaining chip if things get to that point. Welcome to modding cars.....where things out of our control can and do get messed up sometimes....one of the reasons I try to do as much as I can myself....not so easy when it comes to mounting tires however. Good luck! -Tony |
Real sorry to see that Jay. I feel for you and am sorry it happened. The good news is that it can be fixed.
Few things: 1) Find a Hunter Revolution machine. This machine can mount your tires on those wheels with no issues or drama or damage. Start calling dealerships in town and ask. Then start calling the places in town that service high end exotics or even places that services trucks. Someone in town will have one. That's where you go. 2) Prior to leaving your wheels, speak directly to the service manager. Show him that your wheels are pristine and take pictures in front of him. Ask him if he is comfortable mounting tires to these wheels. Ask him what their policy is if they damage him. If he agrees to mount them then you instruct him clearly to STOP mounting if there is any chance of damage, as you will hold him responsible. 3) Try to leave the tires in the sun prior to mounting them. If there is some heat in them they become more pliable and easier to mount. Good luck and sorry again this happened to you. |
Thanks for the replies. The first shop that mounted my rear tires was wheel works. The manager offered to send them to wheel works a wheel specialist to get fixed. I believe they just use touch up paint though. I’m not sure how to go about getting them to pay for Re powder coating. The rear rims has deep holes from the machine so they need to be stripped and filled with JB weld probably. I don’t even know if this will cause weak spot in the rim though. Also this tire is mounted and on car. I used touch up paint on those holes and no one can see. I don’t know if i should just except defeat on the rear rims. The other problem is if I powder coat the fronts only they might not match. The second shop I need to call the manager today and try and figure it out. I have a hard time believing that I’ll get either shop to do anything and I will have to come out of pocket to fix them. Especially since all four need to be fixed by two shops. |
Originally Posted by Jayfabs
(Post 1596622996)
Thanks for the replies. The first shop that mounted my rear tires was wheel works. The manager offered to send them to wheel works a wheel specialist to get fixed. I believe they just use touch up paint though. I’m not sure how to go about getting them to pay for Re powder coating. The rear rims has deep holes from the machine so they need to be stripped and filled with JB weld probably. I don’t even know if this will cause weak spot in the rim though. Also this tire is mounted and on car. I used touch up paint on those holes and no one can see. I don’t know if i should just except defeat on the rear rims. The other problem is if I powder coat the fronts only they might not match. The second shop I need to call the manager today and try and figure it out. I have a hard time believing that I’ll get either shop to do anything and I will have to come out of pocket to fix them. Especially since all four need to be fixed by two shops. |
This is why you ask around with shit like this. I waited 10 weeks for my forged wheels and had thousands invested in them. Im not bringing them to the same town fair tire that mounts 17" camry steel wheels all day. You get what you pay for, dont cheap out this far down. I pad $50 per wheel for mount and balance but they came out perfect
|
Originally Posted by Mordeth
(Post 1596622692)
...
2) Prior to leaving your wheels, speak directly to the service manager. Show him that your wheels are pristine and take pictures in front of him. Ask him if he is comfortable mounting tires to these wheels. Ask him what their policy is if they damage him. If he agrees to mount them then you instruct him clearly to STOP mounting if there is any chance of damage, as you will hold him responsible. ... To help find a shop, ask around. If you are a member of a club, check with others or look who sponsors them. Look for a local SCCA forum on the 'net. Try posting in the regional sections here on CF for recommendations. As others have said, take it easy on hating the car just because a shop was careless. This is (unfortunately) a normal occurrence when dealing with cars that are different than the average econobox or pickup truck. It's also why so many folks are very loyal to particular shops when they find a good one. I've done 100mi+ trips for tires and alignment from a particular shop just because I knew they could do it w/o messing up. |
Originally Posted by Jayfabs
(Post 1596622303)
uhhhh what Maybe light up a fat one and relax? |
Originally Posted by chassed
(Post 1596623695)
I don't get how the car is at fault for what the tire shop did....
Maybe light up a fat one and relax? |
Originally Posted by Jayfabs
(Post 1596622033)
Feeling defeated yet again with this stupid car. I swear I should have just bought a super low mileage ZR1. I decided to get new rims. The first shop that mounted my rear rims put deep gouge marks all along the inner rim. That was a couple days ago. I used touch up paint to fix but not happy. Those were 345 NT05R. Now today I tried to have my front rims mounted at an other shop. 285/30/19’s they could not get them mounted. In the process they chipped the powdercoat on from lip and scratched both the rims on inner wheel. Is all this normal? Now I have to send the rims out to get fixed. So irritated. Not sure if I should just leave backs alone or fix also. I know it going to cost me a lot. https://cimg3.ibsrv.net/gimg/www.cor...5d14d5f8b.jpeg https://cimg4.ibsrv.net/gimg/www.cor...1b3e84880.jpeg Clif |
First, this has nothing to do with the car. If you bought that ZR1, there's no promise that you wouldn't have had issues with that either. Cars are loaded with mechanical dependencies, and they can fail at any time, on any car.
Second, the tire shop is at fault, period. Don't let them tell you otherwise. They need to own up to it and make it right. You shouldn't pay anything to have your wheels in the condition they were in when you brought them to them. If they can't do the job right, it was on them to decline doing the work. |
Originally Posted by JDebler
(Post 1596624680)
First, this has nothing to do with the car. If you bought that ZR1, there's no promise that you wouldn't have had issues with that either. Cars are loaded with mechanical dependencies, and they can fail at any time, on any car.
Second, the tire shop is at fault, period. Don't let them tell you otherwise. They need to own up to it and make it right. You shouldn't pay anything to have your wheels in the condition they were in when you brought them to them. If they can't do the job right, it was on them to decline doing the work. |
Originally Posted by Mordeth
(Post 1596622692)
Real sorry to see that Jay. I feel for you and am sorry it happened. The good news is that it can be fixed.
Few things: 1) Find a Hunter Revolution machine. This machine can mount your tires on those wheels with no issues or drama or damage. Start calling dealerships in town and ask. Then start calling the places in town that service high end exotics or even places that services trucks. Someone in town will have one. That's where you go. 2) Prior to leaving your wheels, speak directly to the service manager. Show him that your wheels are pristine and take pictures in front of him. Ask him if he is comfortable mounting tires to these wheels. Ask him what their policy is if they damage him. If he agrees to mount them then you instruct him clearly to STOP mounting if there is any chance of damage, as you will hold him responsible. 3) Try to leave the tires in the sun prior to mounting them. If there is some heat in them they become more pliable and easier to mount. Good luck and sorry again this happened to you. |
19-20" wheels with low profile tires are just not something you should take to the average wheel works. You wife Tahoe on 18's with a 32" tire? Fine but not a Z06.
|
All times are GMT -4. The time now is 11:46 PM. |
© 2024 MH Sub I, LLC dba Internet Brands