The "Will This Seat Fit In My Car?" thread
Folks,
An often asked question when it comes to installing a race seat in one's car is "will this damn thing fit?" or "how do I make this damn thing fit?" You often don't want to be the first guy to try and put a seat in a Corvette, so you spend hours bouncing around the Internet to see who else has made it work. I myself have two customers having problems right now, one of whom is trying to stuff a seat with a 500mm base into a C7 with our mount with much consternation. I would have told him I don't think that's ever been done before had he mentioned it to me, but then again I haven't searched the internet for hours trying to find out. SO, let's try and consolidate all of our seat mount data into one thread. That way anyone who's installing a seat will be able to look here to see if it was done and how it was done. I'm thinking if we can keep it in some set format it will make the data easier to peruse. Just copy and paste this into your response and fill in the blanks. Please see below: Generation, Year, and Model: Driver Seat: Driver Mount: Driver Sub Belt: Passenger Seat: Passenger Mount: Passenger Sub Belt: Harness Bar or Cage: Interior?: Carpet?: Stock Belts in car?: Driver: Notes/Pics: Simple enough? If there is anything anyone thinks should be added please let me know. I'll start first below. I think this will be a good way to take the guess work out of a lot of people's interior plans. I hate selling something to a customer and then they have issues because I can't possibly know everyone's setup. |
Use as a quick reference to jump to posts:
C5's: Mark @ AMT Motorsport - Sparco EVO II US Click Here Work_Truck - Sparco Grid II Click Here TMtraylor - OMP HTE-R 400Click Here Duk007 - Sparco EVO II US Click Here Dan H - Sparco EVO II US Click Here JCarothers - Sparco Evo II Click Here Chetly - OMP WRC-R Click Here Heavy Zee - Ultrashield Road Race Click Here Deputy Dangle - Recaro Pole Position Click Here QuickShift C5 - Sparco Evo II Click Here SnakeaterZ28 - Sparco Evo II US Click Here Octagon8 - Sparco Alpha Click Here JRitt@Essex - RaceTech 4009WTHR Click Here Chet'sLS3 - Sparco Ergo Click Here NoradIV - OMP First-R Click Here Sub8 - Sparco Evo II Click Here RX7Rob - Sparco Evo Click Here smitty2919 - Corbeau Forza Click Here Dan H. - OMP HTE-R 400 Click Here Torque Obesessed - Sparco R100 Click Here Mr Turco - Sparco QRT-R Click Here C5 Golf Guy - Ultrashield 18" Rally Sport Click Here Mark@AMT Motorsport - Sparco QRT-R Click Here NSFW - Cobra Imola Click Here Mark@AMT Motorsport - Sparco Circuit 2 - DID NOT FIT - Click Here EZ Glider - Sabelt X Pad - Click Here Kubs - Tillet B6 Screamer XL Click Here Monarch - Braum Elite R - DID NOT FIT - Click Here G_Loc - Sparco R100 Click Here Savagetaco - MOMO Lesmo One XL - Click Here Ubervic - Braum Elite S Click Here Bort - Sparco QRT Evo L - Click Here Schaumi - OMP Style - Click Here C6's: Mordeth - Sparco Ergo Medium Click Here Dirk Miller - Cobra Evolution Halo Click Here mp4659 - Sparco EVO II Click Here Had3nuf - Sparco Evo II US Click Here Charley Hoyt - Cobra Suzuka Wide Click Here Blue_Z06 - OMP HTE-R 400 Click Here '12GS - Sparco Ergo II Click Here IBAUCLAPlaya - Racetech RT4009W Click Here ttx350z - OMP Champ-R Click Here Spaggs - Sparco EVO II Click Here Andersnor - Sparco EVO II QRT - Click Here BigMonkey73 - OMP WRC-R XL Click Here Kenshin223 - OMP WRC-R XL Click Here Jetbluu - Corbeau LG1 Click Here Hamdog - Tillet B5 Carbon GRP Click Here Turbo6TA - Recaro Speed-V Click Here DaOtherOne - Sparco Evo QRT Click Here MrZ06Man - Cobra Nogaro Click Here Chukman - Corbeau RRX Click Here 72Greg - Omp Champ-R Click Here C7's: Fleming23 -OMP HTE-R 400 Click Here badhabit_wb - Racetech 4119W Click Here Mu$cle - OMP HTE-R 400 Click Here JloZ06 - OMP HTE-R 400 Click Here archfarseer - Recaro Profi SPG XL Click Here ToolHoarder - Ultrashield 16" Pro Road Race Custom Click Here Steve17GS - OMP HTE-R XL Click Here 96GS#007 - OMP HTE-R 400 Click Here CSandy - Sparco Evo QRT L - Click Here ReedGibson - Bride Xero VS - Click Here C8's: SPOHN - Racetech 4100WT w/30mm side inserts Click Here Mark@AMT Motorsport - OMP HTE-R 400 Click Here |
Generation, Year, and Model: C5 2004 Z06
Driver Seat: Sparco EVO II US Driver Mount: AMT Ultralow Driver Sub Belt: AMT Ultralow Passenger Seat: None Passenger Mount: None Passenger Sub Belt: None Harness Bar or Cage: Full Cage Interior?: Completely stripped Carpet?: None Driver: 6', 33'' waist Stock Belts in car?: No Notes/Pics: Sparco EVO II US is basically jammed up against the transmission tunnel. Seat base is 440mm wide. I don't see how you could get a wider seat in a C5 without trimming the seat. This is also a race car only, and had I done it again I would have gotten the normal Sparco EVO II so it would be a little tighter on my hips. Here's an install video with the Ultralow Mount and a Sparco QRT-R. |
Generation, Year, and Model: 1999 FRC
Driver Seat: Sparco Grid II 2018 Driver Mount: Sparco Side Mount + ebay floor mount Driver Sub Belt: Stock belts Passenger Seat: Sparco Grid II 2018 Passenger Mount: Sparco Side Mount + ebay floor mount Passenger Sub Belt: Stock belts Harness Bar or Cage: None Interior?: Full factory Carpet?: Full factory Stock Belts in car?: Yes Driver: Very handsome, good sense of humor (6'1" 34" waist) Notes/Pics: Had to trim lower belt cover for clearance between belt mechanism and seat. https://cimg4.ibsrv.net/gimg/www.cor...f886e25253.png couple more pictures here: https://www.corvetteforum.com/forums...e-fact-13.html |
Generation, Year, and Model: C5, 2003 Z06
Driver Seat: OMP - HTE-R 400 Driver Mount: MTI rails Driver Sub Belt: Drilled the rails and mounted eye bolts Passenger Seat: Sparco EVO II US Passenger Mount: custom fab mounts (not adjustable and have the seat as far back as possible). 1/8" flat steel bent to make it work. Passenger Sub Belt: A cross bar has eye bolts for the sub belts Harness Bar or Cage: Cage now, but these were in place with a full interior too Interior?: Not anymore, but these seats were in the car with a full interior (didn't use the stock seat belts) Carpet?: gone Stock Belts in car?: I used to swap race seat with OEM seats and used the stock belts..I quickly gave that up. Driver: 5'11" - 35" waist ...205 lbs (does this racecar make me look fat???) Notes/Pics: Front of the drivers seat touches the tunnel. The driver seat is as far rearward and dropped down as far as it will go. I removed the rear factory seat studs and and replaced with a bolt pointing down. The nut is on underside of the car. https://cimg6.ibsrv.net/gimg/www.cor...f407e227ae.jpg Helmet space at a premium with the cage and padding https://cimg7.ibsrv.net/gimg/www.cor...b84392306f.jpg Looking down the backside of the driver seat. The black square bar is reinforcement for the seat mount location. The red belts are just the extra length that is not rolled up. https://cimg8.ibsrv.net/gimg/www.cor...5ba5523bf6.jpg Looking down at the driver side. You can see the bolt for the sub-anchor mounts that are bolted to the side of the seat rails. https://cimg9.ibsrv.net/gimg/www.cor...948adf6e66.jpg Front of driver seat touching the tunnel. It worked with a full interior too. The black square bar is reinforcement for the seat mounts the cage builder installed. |
4 Attachment(s)
Generation, Year, and Model: 02 C5 Z06
Driver Seat: Sparco Evo II US Driver Mount: Marrad seat base, Sparco side mounts Driver Sub Belt: Teamtech Passenger Seat:Sparco Evo II US Passenger Mount: Marrad seat base, Sparco side mounts Passenger Sub Belt:TeamTech Harness Bar or Cage: Brey-Krause Bar Interior?: Full Interior Carpet?: Yes Stock Belts in car?: No Driver: 5'11 200-215 lbs Notes/Pics: Seats and not trimmed, but carpet Padding is removed behind the carpet on the trans tunnel. Tight fit but it fits |
Generation, Year, and Model: C7, 2016, Z06
Driver Seat: OMP HTE-R 400 Driver Mount: Marrad Driver Sub Belt: Yes, tied to side rails with eye bolts & clip-in harnesses Passenger Seat: n/a Passenger Mount: n/a Passenger Sub Belt: n/a Harness Bar or Cage: Brey Krause Harness Bar Interior?: Full Carpet?: Yes Stock Belts in car?: Not functional with race seat Driver: Notes/Pics: You loose power mirrors on an memory seat car when you disconnect driver seat plug. No adapters currently on market to override system. https://cimg9.ibsrv.net/gimg/www.cor...458021fb82.jpg https://cimg0.ibsrv.net/gimg/www.cor...03f8ed4467.jpg |
Generation, Year, and Model: C6 2007 Z06
Driver Seat: Sparco Ergo Medium Driver Mount: AMT Driver Sub Belt: AMT Passenger Seat: Sparco Ergo Medium Passenger Mount: AMT Passenger Sub Belt: AMT Harness Bar or Cage: Brey Krause Harness Bar Interior?: Yes Carpet?: Yes Stock Belts in car?: Yes but useless Driver: 5'11" 180lbs, 32" waist Notes/Pics: Perfect fit, no issues. It was so low that I actually raised it up. I bypassed the airbag connector so I don't get an annoying light and installed a harness to retain the tilt steering. https://cimg7.ibsrv.net/gimg/www.cor...54d644eeb2.jpg https://cimg0.ibsrv.net/gimg/www.cor...9b8469a7be.jpg https://cimg2.ibsrv.net/gimg/www.cor...2501e29e20.jpg https://cimg4.ibsrv.net/gimg/www.cor...43beb7b16a.jpg |
Cobras in both C6 & ZO6
Originally Posted by Mark@AMT Motorsport
(Post 1596796572)
This page intentionally left blank.
Use as a quick reference to further posts perhaps. Driver Seat: Cobra Evolution with halo Driver Mount: Marrad slider Driver Sub Belt: Yes modified Passenger Seat: Cobra Signature Pro Passenger Mount: Sparco Passenger Sub Belt: Modified Harness Bar or Cage: Harness bar Interior?: 3LT Carpet?: OEM Stock Belts in car?: only chest strap to fake out police Driver: 5'10" 185 lbs Notes/Pics: |
Generation, Year, and Model: 2009 c6 z06
Driver Seat: Sparco Evo II Driver Mount: custom floor mount by autosport fab for both driver and passenger seats. Harness Bar or Cage: Fully caged. Interior?: race car Carpet?: no Stock Belts in car?: no Driver: 5' 8''. Notes/Pics: while still a "street car" with full interior I used planted seat brackets. while they worked, headroom was very marginally for anyone taller then 5'8'' with a helmet on and lower seat cushion in place. |
Great thread, thanks for starting it. Hoping to see some feedback on a sparco circuit II
Heres mine Generation, Year, and Model: 2002 C5 Z06 Driver Seat: Sparco Evo II US Driver Mount: MTI Driver Sub Belt: Vetteworks Passenger Seat: Sparco Evo II US Passenger Mount: MTI Passenger Sub Belt: Vetteworks Harness Bar or Cage: Brey Krause Harness Bar Interior?: Full Interior Carpet?: Yes Stock Belts in car?: No, the bottom reel by the door sill does not fit with the MTI rail and the seat mounted as low as possible Driver: 6'1" 230# dad bod, need to get my ass on an elliptical. Notes/Pics: Stock belts don't fit like mentioned above. BK Harness bar required modification, there is a bar that runs from the bar to the floor. The hole needs to be opened up for the stud extender to fit. Decent amount of interference from the vetteworks sub belt mount and the nut for the stud extender. A set of large crows foot wrenches (1" & 7/8") helped quite a bit. |
Generation, Year, and Model: C6, 2005, base model
Driver Seat: Sparco EVO II US Driver Mount:Sparco base, and Sparco aluminum side mount Driver Sub Belt:Vetteworks, Passenger Seat: Sparco EVO II US Passenger Mount: Sparco base, and aluminum side mounts Passenger Sub Belt: Vetteworks Harness Bar or Cage:Vetteworks sharkbar Interior?: yes Carpet?: yes Stock Belts in car?: no Driver: 6'0" 230 lbs. 38" waste https://cimg0.ibsrv.net/gimg/www.cor...0f16bc2266.jpg Notes/Pics: https://cimg1.ibsrv.net/gimg/www.cor...8bcb74846a.jpg https://cimg2.ibsrv.net/gimg/www.cor...ef79ac88f9.jpg |
Generation: C6, Year: 2008, and Model: Z51 Widebody
Driver Seat: Cobra Suzuka (wide model Driver Mount: Arizen slide mount Driver Sub Belt: Arizen Passenger Seat: Stock Passenger Mount: Stock Passenger Sub Belt: None Harness Bar or Cage: yes Interior?: Full Carpet?: Yes Stock Belts in car?: Not when racing seat was being used. Driver: 6’ tall, 245 lbs, 38” wait Notes/Pics: This was in a duel use car where I used the stock drivers seat / belt for daily driving and put the seat and 6 point harness for track days. It only took about ten minutes to make the swap. Note that the roll bar and shoulder harness wasn’t installed for these pictures Charley http://i200.photobucket.com/albums/a...t/IMG_1815.jpg http://i200.photobucket.com/albums/a...t/IMG_1813.jpg http://i200.photobucket.com/albums/a...t/IMG_1808.jpg http://i200.photobucket.com/albums/a...t/IMG_1810.jpg http://i200.photobucket.com/albums/a...yt/image-4.jpg http://i200.photobucket.com/albums/a...yt/image-5.jpg http://i200.photobucket.com/albums/a...yt/image-6.jpg Here is how I simulated the seat so the air bag would work for the trip to the track. I used Vetteworks Simulators. But, the normal installation requires pulling the stock harness out of the stock seat. To make the switch out easier I ordered a replacement seat harness from one of the forum vendors. Seat harnesses can be ordered two ways....with heat and memory....or without. The harness without heat and memory is only. In addition to the harness you will need three plug in simulators (two for pre '08 cars). One simulator is for the seat airbag, the second is for the seat position sensor, the third (for '08+ cars) is for the seat belt pretensioner. Here is a picture of the three simulators. The two yellow simulators (airbag and pretensioner)fit together and make one plug. The black plug attaches to the harness and simulates the seat position sensor. http://i200.photobucket.com/albums/a...t/IMG_1954.jpg Here is a picture of the harness (without heat and memory). http://i200.photobucket.com/albums/a...t/IMG_1797.jpg Here is a picture of how I modified the harness. You only need the pink and green wires going to the seat position sensor (or simulator in this case) http://i200.photobucket.com/albums/a...t/IMG_1953.jpg This is what the seat area looks like with no seat. The yellow plug is for the seat airbag (and pretensioner in '08+ cars). This is where the two yellow simulators plug in. The wide black plug is where the harness plugs in for the seat track simulator. The black simulator plugs into the other end of the harness. http://i200.photobucket.com/albums/a...t/IMG_1504.jpg This is the only picture that I have that shows how the shoulder harness was installed. This was Mick Fleetwood driving my car.... not me. ( petty bar was not installed at the time). http://i200.photobucket.com/albums/a...t/IMG_1516.jpg |
4 Attachment(s)
Generation, Year, and Model: C6, 2008 Z06
Driver Seat: OMP HTE-R 400 Driver Mount: MTI Racing Driver Sub Belt: Yes, eyebolts through seat rails Passenger Seat: Corbeau FX1 Passenger Mount: Custom Passenger Sub Belt: Eyebolts Harness Bar or Cage: N/A Interior?: Yes Carpet?: Yes Stock Belts in car?: No Driver: 6ft , 235 lbs, 38 waist Notes/Pics: |
Generation, Year, and Model: C5 2002 Z06 Driver Seat: Sparco Evo II Driver Mount: AMT Driver Sub Belt: AMT Passenger Seat: stock Passenger Mount: stock Passenger Sub Belt: N/A Harness Bar or Cage: Sharkworks, I think. Interior?: yes Carpet?: yes Stock Belts in car?: yes Driver: 5’11”, 190lbs, 33 inch waist Notes/Pics: trimmed inner front corner of seat to fit seat in position.https://cimg5.ibsrv.net/gimg/www.cor...62bb74840.jpeg |
Generation, Year, and Model:. 2004 C5Z
Driver Seat: OMP WRC-R Driver Mount: modified planted base, sparco slider, planted sideplates Driver Sub Belt: custom Passenger Seat: stock Passenger Mount: stock Passenger Sub Belt: n/a Harness Bar or Cage: Brey Krause Interior?: Complete w/padding under carpet Carpet?: Yes Stock Belts in car?: Yes Driver: 5'8" & husky Notes/Pics: pics uploaded later |
https://cimg0.ibsrv.net/gimg/www.cor...4b94e7952c.jpg
https://cimg6.ibsrv.net/gimg/www.cor...ff32c0f117.jpg https://cimg6.ibsrv.net/gimg/www.cor...b33464d3ad.jpg https://cimg7.ibsrv.net/gimg/www.cor...007d74c40e.jpg I started a thread in the z06 section. It's here https://www.corvetteforum.com/forums...post1596815858 I'm pretty sure I'm the reason Mark started this thread. I sent him pics in the beginning and it didn't look like it was going to work out. Generation, Year, and Model: C7 2015 z06 Driver Seat:Ractech 4119w Driver Mount:AMT Driver Sub Belt:AMT Passenger Seat:Racetech 4119w Passenger Mount:AMT Passenger Sub Belt:AMT Harness Bar or Cage: BK Harness Bar Interior?:Yes Carpet?:Yes Stock Belts in car?:No/ 6 point Racetech harness Driver:6"3" 225 lbs. Notes/Pics: I'll add pics later Tight fit but I got it to work. |
Generation, Year, and Model: C5 2000 FRC
Seats: Ultrashield Roadrace Halo 20’ degree layback, tall set up, 16” seat. Driver Mount: Custom - Bolted to custom floor brackets - welded between frame and torque tube tunnel Driver Sub Belt: 6 pt Race Quip 6-Point Euro Style HANS/HNR Harness Harness Bar or Cage: Full Cage road race car Interior?: none Carpet?: none Stock Belts in car?: none Driver: 6' 1" 190 lbs Notes/Pics: https://cimg1.ibsrv.net/gimg/www.cor...52fdf6792d.jpg https://cimg1.ibsrv.net/gimg/www.cor...287db1db2c.jpg
Originally Posted by Mark@AMT Motorsport
(Post 1596796571)
Folks,
An often asked question when it comes to installing a race seat in one's car is "will this damn thing fit?" or "how do I make this damn thing fit?" You often don't want to be the first guy to try and put a seat in a Corvette, so you spend hours bouncing around the Internet to see who else has made it work. I myself have two customers having problems right now, one of whom is trying to stuff a seat with a 500mm base into a C7 with our mount with much consternation. I would have told him I don't think that's ever been done before had he mentioned it to me, but then again I haven't searched the internet for hours trying to find out. SO, let's try and consolidate all of our seat mount data into one thread. That way anyone who's installing a seat will be able to look here to see if it was done and how it was done. I'm thinking if we can keep it in some set format it will make the data easier to peruse. Just copy and paste this into your response and fill in the blanks. Please see below: Generation, Year, and Model: Driver Seat: Driver Mount: Driver Sub Belt: Passenger Seat: Passenger Mount: Passenger Sub Belt: Harness Bar or Cage: Interior?: Carpet?: Stock Belts in car?: Driver: Notes/Pics: Simple enough? If there is anything anyone thinks should be added please let me know. I'll start first below. I think this will be a good way to take the guess work out of a lot of people's interior plans. I hate selling something to a customer and then they have issues because I can't possibly know everyone's setup. |
Originally Posted by work_truck
(Post 1596796871)
Generation, Year, and Model: 1999 FRC
Driver Seat: Sparco Grid II 2018 Driver Mount: Sparco Side Mount + ebay floor mount Driver Sub Belt: Stock belts Passenger Seat: Sparco Grid II 2018 Passenger Mount: Sparco Side Mount + ebay floor mount Passenger Sub Belt: Stock belts Harness Bar or Cage: None Interior?: Full factory Carpet?: Full factory Stock Belts in car?: Yes Driver: Very handsome, good sense of humor (6'1" 34" waist) Notes/Pics: Had to trim lower belt cover for clearance between belt mechanism and seat. https://cimg4.ibsrv.net/gimg/www.cor...f886e25253.png couple more pictures here: https://www.corvetteforum.com/forums...e-fact-13.html |
Originally Posted by '04Z06
(Post 1597039445)
Curious how you were able to route the stock seatbelt on the Grid II through the outboard lap belt hole? Did not realize the retractor could fit through.
i unwound the seatbelt and then fed it through. Took about 10 minutes per side. I’m very happy with the result. |
All times are GMT -4. The time now is 01:50 PM. |
© 2024 MH Sub I, LLC dba Internet Brands