CorvetteForum - Chevrolet Corvette Forum Discussion

CorvetteForum - Chevrolet Corvette Forum Discussion (https://www.corvetteforum.com/forums/)
-   Northeast (https://www.corvetteforum.com/forums/northeast-40/)
-   -   Dealer in Buffalo NY (https://www.corvetteforum.com/forums/northeast/4118652-dealer-in-buffalo-ny.html)

Patastic 03-27-2018 08:00 AM

Dealer in Buffalo NY
 
can anyone recommend a good corvette dealer that i could get 100 octane tune and suspension tune in buffalo, ny, coming from Canadian side

corv1998 03-27-2018 12:32 PM

Try Kennedy's dyno tune on Niagara falls Blvd ,wheatfield , older guy but very good an meticulous.

Patastic 03-27-2018 01:53 PM

sorry should clarify looking for a GM dealer

corv1998 03-27-2018 03:01 PM

Good luck around buffalo , difficult enough just trying to get a dealer to even think about changing a Michelin sport cup 2 . Gonna try vanbortel chev up past Rochester ny , huge inventory maybe they can help..

dvilin 03-27-2018 03:54 PM


Originally Posted by corv1998 (Post 1596870414)
Good luck around buffalo , difficult enough just trying to get a dealer to even think about changing a Michelin sport cup 2 . Gonna try vanbortel chev up past Rochester ny , huge inventory maybe they can help..

Call Nate Chandler 585-857-1033 at Van Bortel.

vettejeff 03-27-2018 05:16 PM

I have been taking my Zo6 to Paddock chevy since i bought it there. Their corvette tech John Gorman is excellent. He's they only one ill let do oil changes or updates on my car and Im very picky! Give them a call to see if they can do those updates for you? If they can ask when John is working and have him do them!

Patastic 03-27-2018 06:04 PM

thank you all

97Black 03-27-2018 06:09 PM


Originally Posted by Patastic (Post 1596871793)
thank you all

West Herr Chevy in Orchard Park has always taken good care of mine.

lordofwar 03-27-2018 06:19 PM

bob Johnson chevy Rochester ny.they did mine.

Jason Zajac 07-18-2018 12:40 PM


Originally Posted by corv1998 (Post 1596869295)
Try Kennedy's dyno tune on Niagara falls Blvd ,wheatfield , older guy but very good an meticulous.

Lol just seen the "toon" in your old car along with the zip ties. I guess you made the right choice with that meticulous installation & toon. To think that supercharged car was tuned on an inertia dyno makes me cry. Don't worry I will fix it.

corv1998 07-18-2018 04:07 PM

At least Kennedy didn't go to work drunk.

AORoads 07-18-2018 07:27 PM

You guys have "history" or something? ^^^:eek:

Jason Zajac 07-18-2018 08:32 PM


Originally Posted by AORoads (Post 1597623656)
You guys have "history" or something? ^^^:eek:

nah just a local idiot I should have never matched a price from an unauthorized A&A dealer down in Texas. Was all worried about me “joy riding” his 1998 C5 when at the time I owned a supercharged built C6. Lol at the drunk to work. After seeing that airflow & PE raped tune I wonder if your meticulous “tooner” was also drunk or just an idiot. Have a nice day.

Oh and btw a bone stock automatic C5 with a supercharger should not run like trash until it warms up. That should have been the first clue that your meticulous tune was trash

corv1998 07-18-2018 10:26 PM

This is why nobody goes to j & j speed shop , arrogance , stupidity , and just terrible customer relations . Most people in buffalo would rather drive 60 miles to Rochester ny than to deal with this kind of mentality. It's also why business's close. You'll come crawling back begging for work soon enough.

Jason Zajac 07-18-2018 11:18 PM


Originally Posted by corv1998 (Post 1597624758)
This is why nobody goes to j & j speed shop , arrogance , stupidity , and just terrible customer relations . Most people in buffalo would rather drive 60 miles to Rochester ny than to deal with this kind of mentality. It's also why business's close. You'll come crawling back begging for work soon enough.

Lol okay Mark don't worry will post the results when I fix all the meticulous work you had done. I have around a 3-4 month wait right now to get a car in the door (lots of nobodies) and trust me I will never come crawling back begging you for work

corv1998 07-19-2018 07:48 AM

Yes, I guess your right Jason .we local car enthusiasts are just nobodies an idiots.You will always have work in buffalo fixing rusted out mufflers and mounting snow tires. Even if this dispute that you started by putting down another hard working car builder costs you one person to build somewhere else , we win.

Jason Zajac 08-13-2018 12:18 PM


Originally Posted by corv1998 (Post 1597625712)
Yes, I guess your right Jason .we local car enthusiasts are just nobodies an idiots.You will always have work in buffalo fixing rusted out mufflers and mounting snow tires. Even if this dispute that you started by putting down another hard working car builder costs you one person to build somewhere else , we win.

Mark I will try to make this easy for you to understand. You are the "idiot" and you eluded to the fact that I have no business when I in fact have a 4-5 month wait currently. Which I replied lots of nobodies. The fact is my customers are definitely great people and I am blessed to have them lined up waiting so patiently for quality work. I also think you are missing the fact that I don't DO GENERAL REPAIR. I specialize in high end builds, performance parts & dyno calibration. I do however on occasion mount C7z wheels Michelin Pilot tires for local dealers that don't want to attempt it and trust me 100%

corv1998 08-13-2018 05:51 PM

Do you really think this is good p.r for the shop ? Starting a battle with a local car enthusiast who knows hundreds of car people is clearly a mistake. I'll be sure to tell everyone of your stupidity. I guess you must be operating the cars with the garage door closed as the fumes or alcohol have clearly effected you cognitive thinking!!! P.s Now we can understand why your wife left you many years ago , smart move on her part ...


All times are GMT -4. The time now is 02:10 AM.


© 2024 MH Sub I, LLC dba Internet Brands