Coil Relocation kit: Plug Wires, Coil Brackets and wire Harness
 

I have decided to move my coils back to the valve covers so I am selling my relocation kit. I put together the wires myself and each plug wire is 4ft long and they are made out of MSD Super Conductor 8.5mm wires. I think that they tested at around 30ohms when I measured them.


Here is what you are buying:

1. 8 x 4ft MSD Super Conductor 8.5mm plug wires with MSD 45 degree boots for the coils and MSD straight boots for the plugs. I installed the ends with a spark plug specific crimper so you won't have an issue with any of the ends coming off. It is time consuming to make these wires.

2. 2 brackets for the coils.

3. 2 wire harnesses. 3ft each

I relocated my coils behind the fenders and there was plenty of room .

I put about 2,000 miles on this kit.

$200 shipped in the CONUS. I will get some pics up in the next day or so.

Coils
 

Would like to see some pictures of them installed on your car if possible. Thanks.

May i ask what plug wire kit did you use sir?

pm pics when you can

Pics please

Pics have been added.

These wires are custom that I made myself using MSD wires, boots and ends.

Interested

Pending Sale.

please let me know if sale falls through

payment sent this morning!