Originally Posted by Blu-Beast (Post 1597035547)

I have the GM poverty splitter. I got the Zero1 style skirts in ABS plastics. I don't like the tapered look of the zero7 .Also not a fan of the fiberglass or carbon fiber. The color look almost the same as the splitter. I bought some carbon flash paint but haven't decide if I should install it as is or paint both.

Originally Posted by FLsteve (Post 1597046045)

Thanks everyone for the terrific input. After pondering, I decided to go with the ebay ABS ones. No paint, no hardware, no directions. Hoping installation is as simple as the splitter was. i.e. remove existing screws, attach, reinsert screws, perhaps drill a couple new holes use rivets.

Originally Posted by FLsteve (Post 1597103877)

So I received the ABS skirts. Very simple.

The holes for the existing screws were already drilled out and there were also 4 or 5 holes in the front edge for new screws. Looking at videos on YouTube, it appears most folks just use small self tapping screws. I did too. BUT!!! One each side of the car, and in the exact same spot ( I believe the 3'rd hole) the self taping screw was not just going through body skin, instead it hit hard metal. The second I hit that metal I stopped and did not install the screw into the #3 spot on either side. Not until someone on here can confirm it is safe to put a screw through that location. Thoughts?

Originally Posted by cowboy casey (Post 1597036928)

You are in luck :)

Jeremy from JW motorsports has them and he is a supporting member and awesome to work with...

http://www.jwmotorsportsllc.com/C7-Z...ial_p_352.html

Originally Posted by Tom760 (Post 1597103926)

How is the finish on these ABS skirts...Wondering if they really do need sanding and painting as description recommends?

Originally Posted by Rebel Yell (Post 1597039651)

Here ya are Steve. Bought these off of Ebay at around 125 bucks. They match the rest of the black plastic on the car, and are easy to install. The thing I like about them is if I screw up, and break one they're cheap enough to replace.

https://cimg9.ibsrv.net/gimg/www.cor...386131072c.jpg

Originally Posted by FLsteve (Post 1597104062)

Sorry I don't have any photos... but I will answer it this way. If you have or have seen the basic non-painted poverty splitter from GM... it has texture. Now imagine if the splitter with the bumps was just smooth... That's what the skirts are like that I received. No texture, just smooth plastic. I am going to keep as is for now, but going to order a carbon flash spray paint and will ponder if I should paint all three to match.

Originally Posted by Tom760 (Post 1597104081)

Looks great...do you have a link to where you purchased these?

Originally Posted by FLsteve (Post 1597103877)

So I received the ABS skirts. Very simple.

The holes for the existing screws were already drilled out and there were also 4 or 5 holes in the front edge for new screws. Looking at videos on YouTube, it appears most folks just use small self tapping screws. I did too. BUT!!! On each side of the car, and in the exact same spot ( I believe the 3'rd hole) the self taping screw was not just going through body skin, instead it hit hard metal. The second I hit that metal I stopped and did not install the screw into the #3 spot on either side. Not until someone on here can confirm it is safe to put a screw through that location. Thoughts?

Originally Posted by Rebel Yell (Post 1597104880)

Tom, I got them on Ebay for approx.$150. I just looked, and for some strange reason the style I have are listed at 1,150 bucks. I sent the seller (not the one I bought from)a question about the price, because they are ABS not gold.

Here's the link of the seller I bought from, and the dang things are listed at 5K bucks. I'll send them a question about the price also. Something ain't right.

https://www.ebay.com/itm/For-14-Up-C...-/112429530709