Covering that d*mn chrome strip on my grille
I bought an overlay sticker kit but that didn't go as planned, I wasn't all that thrilled about a sticker on my Vette anyway.
I would rather not change the grille if I can avoid it so I was considering one of these from RPI. Does anyone have any comments good or bad about this product? I know a lot of guys have different solutions and I appreciate someones opinion but I am really just curious about this specific product. https://www.rpidesigns.com/shop/item...ckout-package/ Appreciate it guys! |
try the stickers from vette efx stripes they were excellent and a lot cheaper then the rpi unit https://vettefx.com/products/vfx-172...l-blackout-kit
|
Originally Posted by SULLY2013
(Post 1597057960)
I bought an overlay sticker kit but that didn't go as planned, I wasn't all that thrilled about a sticker on my Vette anyway.
I would rather not change the grille if I can avoid it so I was considering one of these from RPI. Does anyone have any comments good or bad about this product? I know a lot of guys have different solutions and I appreciate someones opinion but I am really just curious about this specific product. https://www.rpidesigns.com/shop/item...ckout-package/ Appreciate it guys! |
I also bought a sticker "kit" for my grill and it didn't go well.
I ended up buying a 5'x1' roll of 3M 1080 Series Gloss Galaxy Black GP292 and doing it myself. It was much easier knowing I had plenty of material if I messed up & the material was only around $12. |
More Corvette tax. I bought the VetteFx version. It was absolute garbage. Peeled and chipped off after a week of having it installed. Went to my local Autozone (or maybe O'Reilly...forgot), found the same thing...measured, cut, clean, install. Been on for 3 months now. Learn from me...save your money.
|
FWIW, I had an OEM visible carbon fiber roof, purchased CF side skirts, a CF splitter and CF hood vent. After that investment no way would I use tape to cover the chrome grill!
I bought this real carbon fiber cover for my 2014 C7. If you don't have CF then suggest you get the one you found that was recently advertised. It is in two pieces as was mine! It costs much less! Several vendors offering what you found for the same price. You spent ~$60,000 on a car - do it right! https://cimg4.ibsrv.net/gimg/www.cor...ba8a2dad19.jpg |
Novistretch bra.
|
If I hadn't gotten the black package I'd have just masked, sanded (400 grit), and painted it. I've done so with "chrome" trim for years without problem.
|
Originally Posted by JerryU
(Post 1597058830)
FWIW, I had an OEM visible carbon fiber roof, purchased CF side skirts, a CF splitter and CF hood vent. After that investment no way would I use tape to cover the chrome grill!
I bought this real carbon fiber cover for my 2014 C7. If you don't have CF then suggest you get the one you found that was recently advertised. It is in two pieces as was mine! It costs much less! Several vendors offering what you found for the same price. You spent ~$60,000 on a car - do it right! https://cimg4.ibsrv.net/gimg/www.cor...ba8a2dad19.jpg Apprecite all of your feedback :) |
Originally Posted by newskatercat
(Post 1597058049)
I have it, and very happy with it! :cheers:
will be required to slide the blackout between the grille and camera" .how difficult is that to do? |
I have it and it looks great and was easily attached. Doesn't look like a tack on product. I had the tape previously, but this looked better to me and was worth the Corvette tax.
|
Originally Posted by JerryU
(Post 1597058830)
FWIW, I had an OEM visible carbon fiber roof, purchased CF side skirts, a CF splitter and CF hood vent. After that investment no way would I use tape to cover the chrome grill!
I bought this real carbon fiber cover for my 2014 C7. If you don't have CF then suggest you get the one you found that was recently advertised. It is in two pieces as was mine! It costs much less! Several vendors offering what you found for the same price. You spent ~$60,000 on a car - do it right! Much better. https://cimg4.ibsrv.net/gimg/www.cor...ba8a2dad19.jpg |
I know I'm in the minority here, but I like the chrome strip.
https://cimg9.ibsrv.net/gimg/www.cor...0fe3b3abb1.jpg |
If you do not have access to that tint type film, many have used plasti dip. Very easy to apply and remove if you do not like it.
|
Originally Posted by Bob Beroza
(Post 1597059908)
I know I'm in the minority here, but I like the chrome strip.
https://cimg9.ibsrv.net/gimg/www.cor...0fe3b3abb1.jpg |
https://cimg4.ibsrv.net/gimg/www.cor...6c90e235f.jpeg https://cimg5.ibsrv.net/gimg/www.cor...088477ee1.jpegMy garage is tiny
Originally Posted by Italianfox
(Post 1597059103)
It says "Models with dual camera
will be required to slide the blackout between the grille and camera" .how difficult is that to do? |
|
Originally Posted by dashotgun
(Post 1597058013)
try the stickers from vette efx stripes they were excellent and a lot cheaper then the rpi unit https://vettefx.com/products/vfx-172...l-blackout-kit
I too bought mine from Vettefx. It looks like it came from the factory blacked out. Looks so much better without the “braces”. :thumbs: https://cimg3.ibsrv.net/gimg/www.cor...a7c818a23.jpeg https://cimg5.ibsrv.net/gimg/www.cor...514eda390.jpeg |
|
Originally Posted by DSPC7
(Post 1597061105)
] i have cameras and the cover slides under the cameras - easy to do and worth the Corvette tax. SIDE ISSUE: I find it funny when a product like this selling for ~$140 is called Corvette Tax! I often address young folks who granulate from a 2 year welding school, many of whom want to start their own business! I encourage them to take a course in finance as many small business start-ups go broke because they don't understand costs and pricing! For the volumes of an item like this that will be sold, the costs of prototypes to get the product right, the cost of molds and the first parts out of a cold mold being scraped at every production run- $140 is not a bad price! PS: If you expect to sell through vendors, they also must cover their operating costs, carrying costs for inventory etc and a profit. Selling directly to the public at Vendor cost will loss them! |
All times are GMT -4. The time now is 04:45 PM. |
© 2024 MH Sub I, LLC dba Internet Brands