C3 Corvette Project Under $10,000
I知 looking to buy a C3 Corvette with a manual transmission as a project. I知 trying to restore/fix up a C3 that needs some work or parts replaced. Not looking for a lot of body work to repair rust or anything in that area, more the engine, interior, etc. |
Where are you located?
|
69
How about a nice 69 T Top
Safari Yellow with black interior It's a Automatic but that can be your "project" converting it to 4/5 speed $10K buys it Dave |
Originally Posted by kytxii
(Post 1597164950)
I知 looking to buy a C3 Corvette with a manual transmission as a project. I知 trying to restore/fix up a C3 that needs some work or parts replaced. Not looking for a lot of body work to repair rust or anything in that area, more the engine, interior, etc. |
I have a 70 350/350hp 4spd body is good, drove it when I parked it needs interior with many extra parts including a patriot header to side pipe set up...many extra parts but I'm not letting it go for less that 12K was a manual steering and manual brake car but a have a restored 74 PS frame and tilt, along with the PB set up.
Jerry |
https://www.corvetteforum.com/forums...n-ne-ohio.html
https://images.craigslist.org/00303_...m_1200x900.jpg https://www.ebay.com/itm/1978-Chevro...EAAOSwDw9bPqbm With the extra $$ left over you can make a "project" of adding a stick. Win/win |
1972 Stingray Coupe Project Car
Originally Posted by kytxii
(Post 1597164950)
I知 looking to buy a C3 Corvette with a manual transmission as a project. I知 trying to restore/fix up a C3 that needs some work or parts replaced. Not looking for a lot of body work to repair rust or anything in that area, more the engine, interior, etc. Motor in place is a brand new 383 Stroker Motor built by Jenke Motors in San Antonio. Absolutely Zero miles. 500 hp base. I rebuilt the transmission Turbo Hydromatic 350 and installed a stall converter at 2k rpm. Its not a manual transmission as you requested but just an option. I rebuilt the front suspension, brakes, brake lines, new rotors, master cylinder. New driveshaft U Joints rebuilt the rear end and rear end and rear suspension. Fuel tank is brand new and new fuel lines are in place. New wiring harness is present. Interior needs to be rebuilt, but all the parts are present. Because of the new motor I installed I was going to need a new hood also. Id be willing to let go of it for somewhere around what your target price is. If you would like me to include some pictures and more detailed info just let me know. Thank you! |
74 corvette
I'm selling my 74 corvette for $7750. It has a 350 engine with an upgraded Edelbrock intake and carb. The car has a 4-speed in it. It was a frame off restoration. The only things it need is some new carpet. The paint is good but could use a new paint job. For an extra $1000 I will put in some new carpet, door panels, and you can choose from the rims I have. The headlights do work. This is a California car.
https://cimg2.ibsrv.net/gimg/www.cor...627e0954df.jpg https://cimg5.ibsrv.net/gimg/www.cor...13d395fd6c.jpg https://cimg4.ibsrv.net/gimg/www.cor...15854172a9.jpg https://cimg4.ibsrv.net/gimg/www.cor...fa9fa23d9c.jpg https://cimg6.ibsrv.net/gimg/www.cor...c55b233748.jpg https://cimg8.ibsrv.net/gimg/www.cor...c63c29d815.jpg https://cimg0.ibsrv.net/gimg/www.cor...f7a10c0d5c.jpg https://cimg1.ibsrv.net/gimg/www.cor...7e13b2ebdc.jpg https://cimg2.ibsrv.net/gimg/www.cor...57ff76618b.jpg |
72 cs
Originally Posted by kytxii
(Post 1597164950)
I知 looking to buy a C3 Corvette with a manual transmission as a project. I知 trying to restore/fix up a C3 that needs some work or parts replaced. Not looking for a lot of body work to repair rust or anything in that area, more the engine, interior, etc. https://cimg7.ibsrv.net/gimg/www.cor...e68af8943e.jpg |
Originally Posted by Stingrayhoutx
(Post 1597550116)
I currently have a 1972 Corvette Stingray I need to sell due to family reasons. I have owned the car since 1998 and drove it for a number of years then decided to rebuild it.
Motor in place is a brand new 383 Stroker Motor built by Jenke Motors in San Antonio. Absolutely Zero miles. 500 hp base. I rebuilt the transmission Turbo Hydromatic 350 and installed a stall converter at 2k rpm. Its not a manual transmission as you requested but just an option. I rebuilt the front suspension, brakes, brake lines, new rotors, master cylinder. New driveshaft U Joints rebuilt the rear end and rear end and rear suspension. Fuel tank is brand new and new fuel lines are in place. New wiring harness is present. Interior needs to be rebuilt, but all the parts are present. Because of the new motor I installed I was going to need a new hood also. Id be willing to let go of it for somewhere around what your target price is. If you would like me to include some pictures and more detailed info just let me know. Thank you! Could I see pictures How much are you asking? Reply here or text pictures to 402-612-6308 |
Hi, I have a '77 that I started working on but I have to leave it at the moment, a lot of work already done, complete brakes, core support, shocks etc, would be a great project,
Direct email; itpphoto@gmail, Thanks, Frank |
78 & 82 but both automatics Located in northern Indiana |
Look at Elba MIkes?
Anyone read he wants A MANUAL? |
69 4 speed
In Rochester NY craigslist there is a 1969 T top
350nom 4 speed in primer for $9K . it has been for sale for a few months.Im about two hrs away and could inspect if needed. dave |
71 coupe rebuilt numbers matching 2chrome bumpers
Originally Posted by kytxii
(Post 1597164950)
I知 looking to buy a C3 Corvette with a manual transmission as a project. I知 trying to restore/fix up a C3 that needs some work or parts replaced. Not looking for a lot of body work to repair rust or anything in that area, more the engine, interior, etc. Email me at N9NEO@hotmail.com and we can talk. |
1969 4 speed project car
Originally Posted by kytxii
(Post 1597164950)
I知 looking to buy a C3 Corvette with a manual transmission as a project. I知 trying to restore/fix up a C3 that needs some work or parts replaced. Not looking for a lot of body work to repair rust or anything in that area, more the engine, interior, etc. |
This thread is over a year old?
|
Rust man, post your car for sale. By now the OP either found something or realized he was better off with a cocaine habit than a Corvette habit. Now, what year is your car? 68-72 sounds priced to sell. 74-up it is a bit overpriced.
|
Might have the car you're looking for
Due to extreme circumstances I have to sell my 1978 25th anniversary 4sd L82 T-top that my father left me after he passed. It hasn't been driven in a couple years, sprayed some started fluid and it fired right up. Interior is crap, but the body is all original, all emblems and lights, etc. I have multiple pics on profile, asking 6500.
|
All times are GMT -4. The time now is 10:15 AM. |
© 2024 MH Sub I, LLC dba Internet Brands