Getting out of track days, huge sell off. Some non track parts also inside.
 

***NOTICE*** as of 7/1 I am out of town working, no idea how to deactivate this post until I get back.

I AM BACK, PLEASE REVIEW THE POST


I have a C5 Z06, so what is listed was on this car. Some parts may fit a C6 base car like brake pads.

Shipping is at buyers expense and buyer pays PayPal fees. Parts located in Mobile Alabama 36619.

Here is how I do shipping, you add enough money to cover shipping and I send you a picture of shipping receipt. After that I will PayPal the change back as a gift. You specify if you want the package insured or not.

PayPal is Speedadikk@Yahoo.com.

Thanks for looking, non track parts listed first. Buy at your own risk, no warranties expressed or implied.


5/20/19

All wheels sold
SOLD 6/5 and shipped on 6/6
Camber kit
Power Steering cooler
Ferodo brake pads
Raybestos ST43 pads
MSD wires and NGK plugs

Sold on 6/6
LS6 injectors

SOLD 4/23/19
Shift knob
Lap belt mounts
Harness Bar

SOLD on 4/25
Sparco Harnesses





LS6 DBW throttle body $100

https://cimg1.ibsrv.net/gimg/www.cor...37cd9b68ad.jpg


Complete truck intake, 3 bolt throttle body, all sensors and injectors $100


https://cimg8.ibsrv.net/gimg/www.cor...e37c8b2290.jpg



GM slave cylinder with throw out bearing, used for 1500 miles $50

https://cimg8.ibsrv.net/gimg/www.cor...1277a1a62b.jpg

GM LS6 clutch, pulled with the above slave and throwout bearing. Would not hold 440rwhp so I pulled it out and installed a McLoed RST and used the flywheel the LS6 came with, so you will need to use your flywheel. If you look it still has the ridges on the flywheel. $125

https://cimg2.ibsrv.net/gimg/www.cor...5698f94b02.jpg

https://cimg3.ibsrv.net/gimg/www.cor...3eb161f61c.jpg


https://cimg1.ibsrv.net/gimg/www.cor...65d69cd6fd.jpg


Large catch can with mounting bracket, appears to be a Jegs can...it has a baffle inside $50

https://cimg5.ibsrv.net/gimg/www.cor...b97f9274ce.jpg



TRACK PARTS==============================





I DO NOT WANT TO BREAK THE FOLLOWING INTO PIECES AT THIS TIME AS IT WAS ALL SETUP TO WORK TOGETHER:

***I WILL CONSIDER BREAKING THIS UP IF MOST PARTS ARE SPOKEN FOR***




Hardbar bar extender set: Allows the bar to be put way back in the car so you can put the race seat as far back as possible along with the stock seat, it will go all the way back with the harness bar in the car. These are very hard to get now.

Planted seat mounts

Kirkey intermediate road race seats with black covers, drivers side is 18 inch passenger is a 17 inch: These seats are mounted directly to the Planted mounts I.E. sitting on the floor they also have braces to hook to the Hardbar harness bar. Seats would be easy to swap side to side, purchase some more 1/4 inch 2x3 aluminum angle and redrill the holes and swap sides.

Nuts are welded to the bottom of the Planted mounts, bolt the mounts down with the lap belt hookups, bolt the seats to the mounts and slide the covers on.....done. All hardware is grade 8 with appropriate washers.




https://cimg1.ibsrv.net/gimg/www.cor...f948d92e77.jpg

https://cimg4.ibsrv.net/gimg/www.cor...fc669e1bd8.jpg

https://cimg5.ibsrv.net/gimg/www.cor...05642f8705.jpg

https://cimg8.ibsrv.net/gimg/www.cor...b4682a097f.jpg

https://cimg0.ibsrv.net/gimg/www.cor...2f999df7b8.jpg

https://cimg2.ibsrv.net/gimg/www.cor...a951b81ca5.jpg

https://cimg3.ibsrv.net/gimg/www.cor...fc6e34062.jpeg

https://cimg4.ibsrv.net/gimg/www.cor...4b3848372.jpeg


https://cimg1.ibsrv.net/gimg/www.cor...0090d16187.jpg


https://cimg9.ibsrv.net/gimg/www.cor...0a3f913346.jpg



https://cimg1.ibsrv.net/gimg/www.cor...ad54a907dc.jpg


Oil cooler, was setup for F body, will need the lines extended most likely $200

https://cimg0.ibsrv.net/gimg/www.cor...8a04d91399.jpg


SOLD 6/5 and shipped on 6/6
Camber kit
Power Steering cooler
Ferodo brake pads
Raybestos ST43 pads
MSD wires and NGK plugs

Sold on 6/6
LS6 injectors

SOLD 4/23/19
Shift knob
Lap belt mounts
Harness Bar

SOLD on 4/25
Sparco Harnesses

Parts 4 sale
 

Hi, was just reading your 4 sale items. What type is the catch can? Was the car NA or supercharged. Also, would you sell just the front and rear speakers? If so, when/why were they removed and did you have ANY distortion b4 removed? Thank you. Larry

I bought the catch can used and I never used it, speakers and radio worked perfect when removed. Speakers have been inside for 2 years

odd question, how much do all the speakers and radio unit weigh by chance?

No idea, 10 lbs maybe

What induced you to hang it up?

All sold items shipped today 6/6

Desire isn't there, I haven't been on track in a year and a half....I don't miss it.

Bumpity

Sure = $1,500 and you can toss out what you don't want :thumbs:

Bump

I'm really tempted to buy the seat package. Just put a forged motor in and I'm struggling with another 1500. My folks are on the way down to Foley, AL right now too and could make it happen for pick up. Grrrrr... so tempting.

Lemme know, I'll have to pull out the harness bar and extenders.

Ah man, why no more track days? I know detailing and my Z build has taken time and money away from that for me lol. I still think you should go C6Z:thumbs:.

Havent been on track in a year and a half, I don't miss it.

Bump it up

Interested in the breather tank - PM sent.

I am currently out of town working and will let you guys know when I get back to the parts, I have no idea how to deactivate this post