CorvetteForum - Chevrolet Corvette Forum Discussion

CorvetteForum - Chevrolet Corvette Forum Discussion (https://www.corvetteforum.com/forums/)
-   C3 Tech/Performance (https://www.corvetteforum.com/forums/c3-tech-performance-3/)
-   -   Computer controlled Distrubitur (https://www.corvetteforum.com/forums/c3-tech-performance/4165054-computer-controlled-distrubitur.html)

Dawgbroke 07-16-2018 11:43 AM

Computer controlled Distrubitur
 
76 Corvette, stock dizzy. I've added the QFI 500 TBI, and love the way it runs now, but just curious.
The QFI has the option, and wiring to control the timing. How difficult is it to add the computer controlled Distrubitor, and which should be used?
I would think that it would be better control, and adjustability than what's on there now?
Options? Opinions?

Dawgbroke 07-17-2018 11:29 AM

Well I guess I'm not the only one that doesn't know. :-)

MelWff 07-17-2018 12:46 PM

i did an advanced search in the C3 Tech/Peformance threads for "QFI 500" and came up with a single post, yours. Did you contact QFI for suggestions?

Dawgbroke 07-17-2018 03:14 PM


Originally Posted by MelWff (Post 1597614011)
i did an advanced search in the C3 Tech/Peformance threads for "QFI 500" and came up with a single post, yours. Did you contact QFI for suggestions?

I have, and received a non answer. I responded for clarification, but nil...I have found some info on other sites, and am narrowing down an answer.
So far, this is the most informative post i've found:
https://www.corvetteactioncenter.com...h-advance.html

Matt81 07-17-2018 04:53 PM

I have never heard of QFI, but on the TBI swap i did last year, I used a small cap distributor from a 94 Suburban with a 454. If swapping a distributor, you need to make sure to use the correct cam driven year (steel). I'm guessing your setup would be similar.

kanvasman 07-17-2018 06:25 PM

Dist from early c-4 TPI engines are computer controlled. I am not familiar with your set up so I can't say if they will play well togeher. I am using a large cap dist on my 1986 L98 transplant into my c3.

Dawgbroke 07-18-2018 08:07 AM


Originally Posted by kanvasman (Post 1597616550)
Dist from early c-4 TPI engines are computer controlled. I am not familiar with your set up so I can't say if they will play well togeher. I am using a large cap dist on my 1986 L98 transplant into my c3.

It's a pretty slick system, good for up to 525 HP.
https://www.holley.com/products/fuel...rts/QFI-500BDM

NewbVetteGuy 07-18-2018 12:54 PM


Originally Posted by Dawgbroke (Post 1597619315)
It's a pretty slick system, good for up to 525 HP.
https://www.holley.com/products/fuel...rts/QFI-500BDM

Weird hybrid carburetor / EFI; I had no idea this existed.

Probably the best place to get help is the official Holley EFI forums.https://forums.holley.com/forumdispl...13-Holley-EFI&
Unless you bought the system from EFISystempro.com then you should just call them; they're great and will answer the phone and talk to you for as long as it takes.


Adam

derekderek 07-18-2018 05:47 PM

As Matt and Canvas guy said. Small cap GM OEM HEI. Apparently when you run them in a boat above 7000, they break up a little. Boats are fun. You can leave them at full throttle til you blow em up... all over ebay 40 bucks. Used OE and new chinese around same price. One of the most common V8 distributors out there, so you know QF is designed to run them. Simple to wire.


All times are GMT -4. The time now is 08:41 PM.


© 2024 MH Sub I, LLC dba Internet Brands