CorvetteForum - Chevrolet Corvette Forum Discussion - M7 - Do I have the wrong ProCharger kit if I have a Auto Trans Cooler relocation kit?

CorvetteForum - Chevrolet Corvette Forum Discussion (https://www.corvetteforum.com/forums/)

- C7 Forced Induction/Nitrous (https://www.corvetteforum.com/forums/c7-forced-induction-nitrous-173/)

- - M7 - Do I have the wrong ProCharger kit if I have a Auto Trans Cooler relocation kit? (https://www.corvetteforum.com/forums/c7-forced-induction-nitrous/4170878-m7-do-i-have-the-wrong-procharger-kit-if-i-have-a-auto-trans-cooler-relocation-kit.html)

C5-VERT

07-31-2018 09:51 AM

M7 - Do I have the wrong ProCharger kit if I have a Auto Trans Cooler relocation kit?

I own a 2017 M7 with the secondary radiator did Procharger send me the wrong parts if it came with a C7 Auto Trans Cooler relocation bag of parts? Why would they send an auto relocate when I specified a 2017 M7? I contacted Mike @ TPS Motorsports last Friday he forwarded the question to them.

https://cimg1.ibsrv.net/gimg/www.cor...d5eac9d253.jpg

GS owner

07-31-2018 10:15 AM

Quote:

Originally Posted by C5-VERT (Post 1597701420)

just keep t they send it anyway kit is all the same

C5-VERT

07-31-2018 11:20 AM

Thank you just wanted to confirm. Although I would prefer if they would spend a few bucks and label it appropriately. Especially for what you pay.

BrunoTheMellow

07-31-2018 08:15 PM

Do you have an extra oil cooler where the intercooler goes? I'd think that should work for it too.

C5-VERT

08-05-2018 03:29 PM

Quote:

Originally Posted by BrunoTheMellow (Post 1597705701)

Do you have an extra oil cooler where the intercooler goes? I'd think that should work for it too.

I have a 2017 M7 so it has the secondary radiator, oil, diff, yes...

C5-VERT

08-05-2018 03:32 PM

BTW, I got my kooks long tubes + 3" x-pipe on Friday. Took me 4.5 hours most of the time was getting that last rear header bolt out. They slid right in with the motor jacked up 1 inch. 30 mins to get the x-pipe and brace bolted in. I also installed my crank sensor harness from the crawford racing port injection system so by this weekend I will have my procharger installed. I had a kids going back to school party this weekend so didn't have time to do much else. WIll report on any issues.

All times are GMT -4. The time now is 03:06 AM.