C6 road race track car roller for sale
 

https://cimg5.ibsrv.net/gimg/www.cor...bb34203010.jpg
https://cimg7.ibsrv.net/gimg/www.cor...f93fc3109a.jpg
https://cimg6.ibsrv.net/gimg/www.cor...31117a5d3d.jpg
https://cimg0.ibsrv.net/gimg/www.cor...802aaea836.jpg
https://cimg8.ibsrv.net/gimg/www.cor...bc3a6f3980.jpg
This is my personal car but right before getting it out on track an 08 Z06 came my way that I couldn't resist. So up for sale is this C6 looking roller, it's actually a C5 frame, the body panels are C6. Note this is not a street car and never will be again, it's a gutted- caged race car. Total weight being in the 2700# area. Perfect for a racer or cheap enough for the weekend HPDE guy that does not want to beat up his street car on track.

Includes;
Pfadt spherical bearings on all control arms and rear shock mounts, never been on track. ($2,000)
Pfadt sway bars front and back
Pfadt coil overs, older but have never been on track.
Fire suppression system
Full cage with Nascar door bars
rear wing, but it does need to be supported better, it's just bolted to the deck now.
C6Z06 brakes, Z06 rims with nearly new Michelin Pilot sports
Dewitts radiator
rear mounted battery box, 2 Batt shut off switches
Window net although a bit sun fadded
Bride seat
We installed an ABS system from a 2002 Z06 in the left rear cubby with all new brake lines. Car runs off a C5 PCM.
Dash board is just a fiberglass shell to hold gauges
Sparco removable steering wheel
The car had a side exhaust thus the hole by the passenger door, I was just going to rivet a piece of aluminum there and go. The trunk hole was from a fuel cell, but it didn't have a bladder so I was going to replace it.
C6Z T-56, diff, TQ tube, and axles included.

This can either be sold outright or we can basically dollar menu it if you want us to put a drive train in it for you.

ASKING PRICE $10,000 obo

Am I asking too much? How about 11k, it has that in mods alone. Comes with a title BTW

Car is located at ECS.

Price drop! You know you want it. lol

It was in it when I bought it, sorry.

Just wanted to bring this back up in hopes someone was looking for a winter project...

How about 10k with the 2006 Z06 TQ tube, trans and dif included? Someone needs to make this their fun toy because I don't need multiple road race cars! lol

I don't see a fire suppression system that it will need and I assume both the belts and window net are past their dates? Fuel cell, motor and trans. I'm concerned with the lack of gauges for monitoring systems also. Is the cage NASA and or SCCA spec? I am interested. any spares for example wheels or anything else. I wouldn't be using a T56, I'd be using a tremic 5 speed. Is it a stock diff ratio from a C5?

Fire suppression is there, belts and window net are outdated. Cage was done elsewhere before I purchased it so I would have to look up those specs and see. I bought it for HPDE use so I wasn't too concerned at the time. I was going to run it with a Haltech and have a Race Pack dash. If you do not want the drivetrain or any parts of it we can just piece what you want and price it accordingly. We are fine with selling it as a gut or fully building it for someone. Give us a call if you would like to discuss it in length.

Thank you Doug.

where did you get that fiberglass dash?

It was in it when I bought it, sorry.

C6Z drivetrain included!