Originally Posted by krwunlv (Post 1597902870)

https://cimg0.ibsrv.net/gimg/www.cor...aadea62f98.jpg
https://cimg1.ibsrv.net/gimg/www.cor...ac643fadd4.jpg

Originally Posted by Blu-Beast (Post 1598416862)

:iagree:


https://lh3.googleusercontent.com/DP...fZguOhdAHtaV0O

Originally Posted by JDSC7VETTE (Post 1598499312)

I have both the front splitter and side skirts in carbon flash from EOS and the fit was perfect and very easy to install. I didn't use the self tapping screws I instead used rivets and I couldn't be happier with the results.

You can spend more money and get what many perceive as better quality but I personally don't see the point. Looking at them on the car you can't tell the difference from 3 thousand dollar skirts and splitter or 600 dollar ones.

I will say this if you hit a curb or driveway approach with either of them they will be worthless garbage.


https://cimg0.ibsrv.net/gimg/www.cor...694f875e66.jpg

Originally Posted by OVRBST (Post 1600954589)

Finally some sunshine.
https://cimg2.ibsrv.net/gimg/www.cor...4e31605acb.jpg
https://cimg0.ibsrv.net/gimg/www.cor...c1b19d27f5.jpg
https://cimg5.ibsrv.net/gimg/www.cor...71ad47c82e.jpg
https://cimg9.ibsrv.net/gimg/www.cor...ba9574307d.jpg

Originally Posted by snampro (Post 1598503196)

same. had one small issue with my order, already addressed by them, quick response as mentioned. Def will order from them again

update: installed the splitter and winglets, very happy, parts are high quality and fit well.

I will say all of the "problems" I've seen on this forum with this kit are not EOS' fault. Yes, if you already have a splitter, like I did, you will need to drill out the old rivets, which is easy, and yes the supplied bolts then won't fit as the holes are larger, I just used plastic push pins/rivets you can buy at Lowe's or O'Reilly, then the install looks original.
https://cimg7.ibsrv.net/gimg/www.cor...b136cfb154.jpg
https://cimg8.ibsrv.net/gimg/www.cor...ce99a5f10d.jpg

Originally Posted by snampro (Post 1598565352)

Finished my EOS sideskirt and splitter install this week. Extremely happy (pun intended). I had an issue with a damaged item, not at all cause by EOS, and they QUICKLY replaced the item. The quality of their products is HIGH. Everything fit great and looks good. The Carbon Flash matches all the other Carbon Flash trim on the car.

https://cimg4.ibsrv.net/gimg/www.cor...6246436d21.jpg

https://cimg4.ibsrv.net/gimg/www.cor...8feb160ea3.jpg

https://cimg7.ibsrv.net/gimg/www.cor...7ea9d842ff.jpg

https://cimg7.ibsrv.net/gimg/www.cor...4032655e71.jpg
25December2018

Originally Posted by gmarcucio (Post 1598536138)

I finally got around to installing my EOS front splitter and side skirts today!


https://cimg2.ibsrv.net/gimg/www.cor...c88820a150.jpg
https://cimg3.ibsrv.net/gimg/www.cor...dae7202a75.jpg
https://cimg4.ibsrv.net/gimg/www.cor...97b57ee8c0.jpg
https://cimg2.ibsrv.net/gimg/www.cor...4a6b04954d.jpg

Originally Posted by ZyberMunster (Post 1598545306)

EOS Carbon Flash skirts on my GS, excellent fitment, packaging, pricing and service.
https://cimg0.ibsrv.net/gimg/www.cor...33c378df1b.jpg
https://cimg3.ibsrv.net/gimg/www.cor...a5d740da7c.jpg

https://cimg4.ibsrv.net/gimg/www.cor...669ccca7e6.jpg
https://cimg7.ibsrv.net/gimg/www.cor...b04dcb0637.jpg

Originally Posted by RegnaR (Post 1598070910)

https://cimg4.ibsrv.net/gimg/www.cor...bc9230187a.jpg
Carbon flash front splitter installed, thanks!

Originally Posted by cvp33 (Post 1598993354)

Installed splitter and side skirts from EOS

https://i.postimg.cc/JzCjSsqk/IMG-02...k/IMG-0276.jpg
https://i.postimg.cc/2yPnkyNg/IMG-02...g/IMG-0277.jpg
https://i.postimg.cc/2jJQFcLT/IMG_02...T/IMG_0278.jpg
https://i.postimg.cc/gkZvMVvp/IMG_02...p/IMG_0279.jpg
https://i.postimg.cc/JhqC1K9B/IMG-03...B/IMG-0315.jpg
https://i.postimg.cc/k4Pq47xh/image.jpg

Originally Posted by Dabbgrandsport (Post 1598213043)

Originally Posted by Virgil6868 (Post 1599028714)

Got mine on Friday... for the price I'm very happy with them...install was fairly quick and easy. I chose to use pop rivets instead of the supplied screws. Highly recommend to anyone who is fine with paying less for stuff that looks like factory!
https://cimg8.ibsrv.net/gimg/www.cor...7ce25d130e.jpg
https://cimg3.ibsrv.net/gimg/www.cor...8bd269a2b2.jpg
https://cimg5.ibsrv.net/gimg/www.cor...5292ff15a6.jpg

Originally Posted by c7steve (Post 1598702196)

everything looks good. who is the mfg. ?

Originally Posted by douglee25 (Post 1599059113)

Everything completed! Took me about 2 hours to do all 5 pieces. OEM Z06 rear wickers installed with nutserts in case anyone was wondering. Everything else is EOS.


https://cimg9.ibsrv.net/gimg/www.cor...0fc8cd5e04.jpg
https://cimg0.ibsrv.net/gimg/www.cor...e15cef2306.jpg
https://cimg1.ibsrv.net/gimg/www.cor...6934816358.jpg

Originally Posted by Meister Vette7 (Post 1599037362)

I am interested in the splitter, splitter extensions (Stage 3) and side skirts in carbon flash black just like post #7 from this thread (red Z06). I have a 2018 Z06 with stage 1 spltter and skirts which I would like to upgrade. What is the best price for this package shipped to 63129? Also, do you sell the front Z06 wheel arches painted carbon flash and price for those as well? Thanks in advance, Mike