Originally Posted by Rick@RKT Performance (Post 1598295196)

When I got my first front CF splitter, a part of the weave was not straight. I contacted them and they sent me a shipping label and took care of it right away. The replacement is perfect. I'll post some pics when I get it installed.


Rick

Originally Posted by DerTom (Post 1597946945)

Does these skirts fit fine on a GS/Z06 or is there any rework required?
Do they need to be screwed/ riveted or is a long time installation with adhesive bonding possbile?
Might depend also on the stiffness of these skirts.

Originally Posted by BWF07 (Post 1598689026)

I cannot say enough about this supplier. I originally ordered the complete set, splitter ZR1 spoiler and the side skirts. While the splitter never fit correctly, I never said anything and ordered a carbon fiber one for around $400. Took over 7 weeks to get it. I had the skirts on as well as the spoiler for some time and then pulled a bone head mistake and forgot I was parked next to a island and pulled out and kit the cure breaking the right side skirt. I went on line the next day and saw that EOS had side skirts for the base in the carbon fiber look. Order a new set and had then in less then 7 days. A perfect fit and now they match the front splitter. It would be nice if they came out with the ZR1 spoiler in the same finish. Foe now I am going to try and wrap it with the 3m carbon fiber look vinyl.

Not the best picture, because the car is in the garage covered but when I can I will get a few more pictures from different angles.
Final thought, if anyone is concerned about the products, because they are cheaper, if you drive the car daily, these are the way to go. They fit great, and if you do break then you can replace then and still be under what others charge for a set.



https://cimg1.ibsrv.net/gimg/www.cor...25041eb998.jpg

Originally Posted by C6Z06Silverbullet (Post 1599745299)

So I received the Front Splitter in the mail yesterday from EOS. Still waiting on the Side Skirts (got the side skirts in carbon fiber). I just got done installing the Splitter. Looks pretty good for being ABS hydrodipped carbon fiber. I went with this style splitter because I rub getting in and out of my driveway, hopefully I can still get in and out.....��. There are 13 bolts on the stock splitter, 9 of those holes line up with the new one. You have to add 4 holes. These are on either side of the openings on the new splitter. I also used 3M double sided tape. If you put all the stocks screws in just a couple of threads you end up with about a 1/4 inch opening. If you take a small pick you can peel the top off the 3M tape before you tighten the bolts. This way the tape doesn't stick before its lined up. For the 4 added holes I used the screws they supplied. If these dont hold up I will just drill out the holes and use GM plastic push clips. I don't like drilling holes but at least if I put the old splitter back.on you would never see them. Fits pretty dam good too. Here are some pics.
https://cimg8.ibsrv.net/gimg/www.cor...76078b43ae.jpg
3M tape I used

https://cimg5.ibsrv.net/gimg/www.cor...d7de00e94e.jpg
The screw on the left is what they supply. The clip on the right is i will use if the screws don't hold up

https://cimg5.ibsrv.net/gimg/www.cor...faef912910.jpg
New vs old

https://cimg3.ibsrv.net/gimg/www.cor...6dba302c6b.jpg
New vs old

https://cimg1.ibsrv.net/gimg/www.cor...21921bcfe2.jpg
After i put the 3M tape on

https://cimg7.ibsrv.net/gimg/www.cor...3e8e15a9b0.jpg
https://cimg5.ibsrv.net/gimg/www.cor...8922cbdb78.jpg
https://cimg6.ibsrv.net/gimg/www.cor...0c283a7b17.jpg
https://cimg1.ibsrv.net/gimg/www.cor...cce2c6fe64.jpg
https://cimg3.ibsrv.net/gimg/www.cor...95f024f49f.jpg
https://cimg4.ibsrv.net/gimg/www.cor...fe27dac837.jpg
https://cimg5.ibsrv.net/gimg/www.cor...80f00cba78.jpg

Originally Posted by C6Z06Silverbullet (Post 1599750308)

Well I made it out of the driveway and back in without hitting :thumbs: Here's some pics on the ground.
https://cimg7.ibsrv.net/gimg/www.cor...77e0b68721.jpg
https://cimg0.ibsrv.net/gimg/www.cor...a7e7805814.jpg
https://cimg5.ibsrv.net/gimg/www.cor...7df8b3d0f6.jpg

Originally Posted by Not So Fast (Post 1598025840)

https://cimg9.ibsrv.net/gimg/www.cor...9d91028155.jpg
https://cimg2.ibsrv.net/gimg/www.cor...328c9a612b.jpg
https://cimg1.ibsrv.net/gimg/www.cor...c26c52d04a.jpg
Good folks to deal with, fast shipping, decent prices. I have their front splitter, side skirts, and rear spoiler on mine :thumbs:
NSF

Originally Posted by itomh (Post 1599688236)

I ended up going with the raw ABS splitter and side skirts on ebay, they match the OEM plastic rear diffuser and other plastics perfectly. It was about $300 for the whole kit, at that price I'm not concerned about having to replace them down the road. I've had them on my car for two year now and look great. leaving them raw ABS I don't have to worry about rocks chipping the paint or when my passengers accidently scrape there feet on side skirts, which my wife does all the time, after 2 years there is no evidence of her shoe scraping. the fit was pretty decent, I didn't have to do any special modifications to fit, no gaps. The finish is somewhat textured like the rear diffuser. https://cimg2.ibsrv.net/gimg/www.cor...adb20d12cc.jpg
https://cimg3.ibsrv.net/gimg/www.cor...00b49bab99.jpg
https://cimg1.ibsrv.net/gimg/www.cor...0befe2941e.jpg

Originally Posted by cmmeadows (Post 1598104249)

https://cimg6.ibsrv.net/gimg/www.cor...ee03e957d.jpeg
I also have the side skirts and rear spoiler. Fast shipping, great quality, and great fitment!

Originally Posted by OneBadLT123 (Post 1598918916)

Extreme Online Store front splitter and side skirts. Just as they came like NSF posted above
Not pictured is the rear ZR1 spoiler from EOS as well.

https://cimg9.ibsrv.net/gimg/www.cor...930bba9f03.jpg

Originally Posted by Shaolin Crane (Post 1598500958)

I have the Extremem Online Store stuff too, I baby it and it's still taken some damage, I think the worst of it was someone that stepped on it. So no reason to spend big bucks when these fit perfectly and look outstanding. My next one I will ne covering with clear bra though.
https://cimg1.ibsrv.net/gimg/www.cor...511abd8a53.jpg

Originally Posted by T-K (Post 1598246650)

Originally Posted by ExtremeOnlineStore (Post 1598248524)

The Carbon Fiber front splitter for C6 Base model is currently out of stock. The side skirts are currently available.

https://extremeonlinestore.com/produ...nt=54907056395

Originally Posted by Rick@RKT Performance (Post 1598295196)

I just want to post here and let everyone know what a great experience I had with ExtremeOnlineStore

When I got my first front CF splitter, a part of the weave was not straight. I contacted them and they sent me a shipping label and took care of it right away. The replacement is perfect. I'll post some pics when I get it installed.

Rick

Originally Posted by iw172 (Post 1598828313)

https://cimg2.ibsrv.net/gimg/www.cor...89666c4e9.jpeg
I purchased these side skirts from this vendor and couldn’t be happier. excellent fit/finish/quality! fast shipping to Ohio, over the top packing too. will do business w/them again...

Originally Posted by T-K (Post 1598304155)

When do you expect the CF front splitter for base C6 to be in Stock?