CorvetteForum - Chevrolet Corvette Forum Discussion

CorvetteForum - Chevrolet Corvette Forum Discussion (https://www.corvetteforum.com/forums/)
-   C3s for Sale/Wanted (https://www.corvetteforum.com/forums/c3s-for-sale-wanted-56/)
-   -   WTB: Cheap project (https://www.corvetteforum.com/forums/c3s-for-sale-wanted/4185268-cheap-project.html)

Teron 09-06-2018 02:56 PM

Cheap project
 
I'm looking for a project C3 i'd prefer a 1980, 81or 82 but open to other years. I'm located in North Carolina so the closer the better. Let me know what you've got.

Teron 09-06-2018 09:26 PM

What area is it located in and how much are you asking?

Slaton16 09-06-2018 09:31 PM


Originally Posted by Teron (Post 1597937231)
What area is it located in and how much are you asking?

Zip code is 30521. Carnesville, GA (Northeast)
was asking 1,000

Teron 09-06-2018 09:39 PM


Originally Posted by Slaton16 (Post 1597937258)
Zip code is 30521. Carnesville, GA (Northeast)
was asking 1,000

that seems like a decent deal but, I'm currently deployed and the wife wouldn't be able to go pick that up alone. If it was roller I might be able to talk her into going and getting it. If you've still got this available mid-November time frame I might be able to work something out.

Easy Mike 09-07-2018 06:51 AM

"Cheap project" might be an oxymoron. Good luck. :)

rossiter76vette 09-07-2018 10:45 PM


https://cimg9.ibsrv.net/gimg/www.cor...0cc984e06.jpeg
I’ve got a 1976 L-48 project car. I picked this car up a little over a year ago from a paint and body guy close by. It’s currently stripped down to primer due to it needing minor body work. I’ve replaced the entire front brakes including hard and soft lines, rotors, calipers, pads, bearings, and MC. I’m currently replacing the brakes in the rear as well as the mounting hardware for the rear suspension. Engine starts up and sounds strong. Transmission should be in working order but I’ve been unable to test due to no brakes. I’m asking $3500 but open to offers. Let me know if you have any questions.

KingRat 09-30-2018 10:07 PM


Originally Posted by Teron (Post 1597934729)
I'm looking for a project C3 i'd prefer a 1980, 81or 82 but open to other years. I'm located in North Carolina so the closer the better. Let me know what you've got.

'81- Good Frame and Body. Broken connecting rod. No Tops. Crystal Lake IL. $3,000. turbo.jet427@yahoo.com
https://cimg1.ibsrv.net/gimg/www.cor...ce7fd32f6e.jpg
https://cimg3.ibsrv.net/gimg/www.cor...d6f605cb72.jpg
https://cimg5.ibsrv.net/gimg/www.cor...765cbc5e6a.jpg
https://cimg9.ibsrv.net/gimg/www.cor...04cca07d04.jpg

rossiter76vette 11-10-2018 08:08 PM

Still looking? I'd drop mine down to $2500, which comes with almost $2000 worth of new parts already. Call or text me (575)973-2808 if interested.

Rescue Rogers 11-11-2018 07:34 PM

heres a craigslist one i found.
68
$10,500
https://hudsonvalley.craigslist.org/...729343180.html

Priya 11-12-2018 01:22 AM


Originally Posted by Rescue Rogers (Post 1598319488)
heres a craigslist one i found.
68
$10,500
https://hudsonvalley.craigslist.org/...729343180.html

Sounds too good to be true. If it is real someone's going to get a great deal.

AllC34Me 11-15-2018 07:43 AM

That is a very good deal. My eyes are always bigger than my pockets. Someone is going to get a good project car.

Teron 11-16-2018 11:18 AM

That does sound like a good deal but its currently out of my reach at 10k. I'll be going to look at a car I found online hopefully this weekend or early next week as long as I can get a flight back to the states.

itsforfun 12-12-2018 04:13 PM

Red/silver 82 $4850
 
https://cimg3.ibsrv.net/gimg/www.cor...76f6700512.jpg
https://cimg1.ibsrv.net/gimg/www.cor...aa0f693479.jpg
https://cimg6.ibsrv.net/gimg/www.cor...3f3d848fd4.jpg
https://cimg4.ibsrv.net/gimg/www.cor...0af998957a.jpg
https://cimg7.ibsrv.net/gimg/www.cor...9c4a5841e4.jpg

Frankenvette 12-20-2018 12:50 PM

Are you still searching for a project car? I decided yesterday to sell mine. Have not even advertised it yet. It's a 73 with an 80/81 body convertible. Rebuilt front and rear supsensions, just installed a Mustang 5 speed (aftermarket Z-spec version, rebuilt vortec heads, Carter 650 carb, C5 wheels, C5 seats... etc... To many upgrades to list at the moment with receipts for most of the parts. Car runs strong, especially with a 5 speed tranny.

I'm asking $9,000. Have about $17,000 in the car and have owned it for 20 years. Was one of the first 8,000 to register on this forum back in 1999. I can provide more details if you have any interest. I live just outside of Knoxville, TN.

Link to my album on this forum... https://www.corvetteforum.com/g/album/1229537

Jim

SBinNC 12-26-2018 04:07 PM

I’m in NC. Check out my C3 I just listed for sale. Solid project.

Steven_Belgium 01-28-2019 01:42 PM


Originally Posted by Frankenvette (Post 1598534511)
Are you still searching for a project car? I decided yesterday to sell mine. Have not even advertised it yet. It's a 73 with an 80/81 body convertible. Rebuilt front and rear supsensions, just installed a Mustang 5 speed (aftermarket Z-spec version, rebuilt vortec heads, Carter 650 carb, C5 wheels, C5 seats... etc... To many upgrades to list at the moment with receipts for most of the parts. Car runs strong, especially with a 5 speed tranny.

I'm asking $9,000. Have about $17,000 in the car and have owned it for 20 years. Was one of the first 8,000 to register on this forum back in 1999. I can provide more details if you have any interest. I live just outside of Knoxville, TN.

Link to my album on this forum... https://www.corvetteforum.com/g/album/1229537

Jim

Love this one !


All times are GMT -4. The time now is 10:28 PM.


© 2024 MH Sub I, LLC dba Internet Brands