Finishing up my other project.
3 Attachment(s)
http://www.britishcarforum.com/bcf/s...a-back-to-life
This has been a 3 year restoration with about 400 plus labor hours. Granted most of the time I am spinning wheels. Attachment 48347283 Attachment 48347282 Attachment 48350111 |
4 Attachment(s)
|
4 Attachment(s)
|
4 Attachment(s)
Attachment 48351198
Attachment 48351199 Attachment 48351200 Attachment 48351201 As soon as this is finished we can get going on our 64 Convertible. |
1960 Austin Healey Sprite (Bugeye or Frogeye)
1275 MG Midget Motor Original was about 43 HP this should be a screamer with 60/65. Converted to Disc Brakes on the front. |
1 Attachment(s)
|
|
Very cool bugeye! Keep the pictures coming
|
Looks great.
|
2 Attachment(s)
|
2 Attachment(s)
Not much access with out a trunk.
Attachment 48350112 All new rear valance panel and rear quarters. One side rebuilt using an English Wheel. There are about 8-10 different panels that were replaced. Attachment 48350895 |
1 Attachment(s)
Not original but Club Sportsman style seats from England.
Attachment 48350894 Seats will be the only bling on what is a pretty dull looking car. I keep hearing from friends what color are you going to paint it? Nardo Gray is the paint not the primer. Shifter will be black. It was red when I bought the rebuilt transmission. |
Starting to add some trim and electrical.
3 Attachment(s)
Bonnet installed.
Attachment 48349557 Attachment 48349558 Attachment 48342952 Temperatures too low for Paint Stripper so I went back to the Bugeye. |
Originally Posted by hcallaway
(Post 1597947061)
that just looks cool as is...but neat that you are doing a project with your brother... Bill |
Originally Posted by silversport
(Post 1598784368)
that just looks cool as is...but neat that you are doing a project with your brother...
Bill https://cimg2.ibsrv.net/gimg/www.cor...0f4da57b7.jpeg https://cimg1.ibsrv.net/gimg/www.cor...86e3f45ff.jpeg |
I have the body and he has our new frame and old rolling chassis. https://cimg0.ibsrv.net/gimg/www.cor...84bed4608.jpeg https://cimg1.ibsrv.net/gimg/www.cor...e2aedc550.jpeg Fully welded replacement frame. I built a metal body dolly. I am stripping the paint down to bare fiberglass. It is a slow process for me. |
https://cimg5.ibsrv.net/gimg/www.cor...21732826b.jpeg
Rocker Channel’s reworked. https://cimg6.ibsrv.net/gimg/www.cor...a6b3544f6.jpeg Frame from a 66 stored in 69/70. In a barn in Allentown PA now in Va and NC. |
Cool projects
|
Awesome skills.
Next project, convert that Miata on the rack into a Monster Miata. |
My Brother/Co-owner of the 64 Vette 405HP
https://cimg5.ibsrv.net/gimg/www.cor...a4d91c8dc.jpeg https://cimg6.ibsrv.net/gimg/www.cor...deec503f0.jpeg https://cimg7.ibsrv.net/gimg/www.cor...c203e216c.jpeg
Originally Posted by 808_Vette
(Post 1598792375)
Awesome skills.
Next project, convert that Miata on the rack into a Monster Miata. |
All times are GMT -4. The time now is 05:05 PM. |
© 2024 MH Sub I, LLC dba Internet Brands