Cray wheel /tire fitment
Hi well I no this has bin asked before but wanted so see if anyone had any updates, I am interested in putting a set of cray wheels on my c7 z51 I am looking at 19x9 with 265/35/19 up front and 20x11 with 315/30/20 in the rear most likely nittos I would like to hear any opinions on fitment issues? Problems? Please post your opinions thank you in advance RAY |
I have 10.5" Cray Spider wheels on mine in the rear with 305 30 20 and it rubs. I had to cut the fenders quite a bit in the rear and have it lowered about .5" from stock height while running about -1.7* of camber.
|
Hi thanks for the reply that’s strange everyone I contact about the 20x11 cray wheels say they fit, that’s why I posted this question to get some real feedback any won else have this brand wheels on there c7 z51 please post thanks |
Most people run them with the factory tires.
|
subieworx is running a different width wheel. Perhaps, the offset for the different wheels also varies. I'd check that before doing anything else.
|
Their offset options put the outer face very close to the same position.
|
All times are GMT -4. The time now is 03:13 PM. |
© 2024 MH Sub I, LLC dba Internet Brands