Originally Posted by C6Z06Silverbullet (Post 1599745299)

So I received the Front Splitter in the mail yesterday from EOS. Still waiting on the Side Skirts (got the side skirts in carbon fiber). I just got done installing the Splitter. Looks pretty good for being ABS hydrodipped carbon fiber. I went with this style splitter because I rub getting in and out of my driveway, hopefully I can still get in and out.....��. There are 13 bolts on the stock splitter, 9 of those holes line up with the new one. You have to add 4 holes. These are on either side of the openings on the new splitter. I also used 3M double sided tape. If you put all the stocks screws in just a couple of threads you end up with about a 1/4 inch opening. If you take a small pick you can peel the top off the 3M tape before you tighten the bolts. This way the tape doesn't stick before its lined up. For the 4 added holes I used the screws they supplied. If these dont hold up I will just drill out the holes and use GM plastic push clips. I don't like drilling holes but at least if I put the old splitter back.on you would never see them. Fits pretty dam good too. Here are some pics.
https://cimg8.ibsrv.net/gimg/www.cor...76078b43ae.jpg
3M tape I used

https://cimg5.ibsrv.net/gimg/www.cor...d7de00e94e.jpg
The screw on the left is what they supply. The clip on the right is i will use if the screws don't hold up

https://cimg5.ibsrv.net/gimg/www.cor...faef912910.jpg
New vs old

https://cimg3.ibsrv.net/gimg/www.cor...6dba302c6b.jpg
New vs old

https://cimg1.ibsrv.net/gimg/www.cor...21921bcfe2.jpg
After i put the 3M tape on

https://cimg7.ibsrv.net/gimg/www.cor...3e8e15a9b0.jpg
https://cimg5.ibsrv.net/gimg/www.cor...8922cbdb78.jpg
https://cimg6.ibsrv.net/gimg/www.cor...0c283a7b17.jpg
https://cimg1.ibsrv.net/gimg/www.cor...cce2c6fe64.jpg
https://cimg3.ibsrv.net/gimg/www.cor...95f024f49f.jpg
https://cimg4.ibsrv.net/gimg/www.cor...fe27dac837.jpg
https://cimg5.ibsrv.net/gimg/www.cor...80f00cba78.jpg

Originally Posted by C6Z06Silverbullet (Post 1599750308)

Well I made it out of the driveway and back in without hitting :thumbs: Here's some pics on the ground.
https://cimg7.ibsrv.net/gimg/www.cor...77e0b68721.jpg
https://cimg0.ibsrv.net/gimg/www.cor...a7e7805814.jpg
https://cimg5.ibsrv.net/gimg/www.cor...7df8b3d0f6.jpg

Originally Posted by BigB72 (Post 1598025936)

Will these fit base model too ?

Originally Posted by Not So Fast (Post 1598025840)

https://cimg9.ibsrv.net/gimg/www.cor...9d91028155.jpg
https://cimg2.ibsrv.net/gimg/www.cor...328c9a612b.jpg
https://cimg1.ibsrv.net/gimg/www.cor...c26c52d04a.jpg
Good folks to deal with, fast shipping, decent prices. I have their front splitter, side skirts, and rear spoiler on mine :thumbs:
NSF

Originally Posted by Shaolin Crane (Post 1598500958)

I have the Extremem Online Store stuff too, I baby it and it's still taken some damage, I think the worst of it was someone that stepped on it. So no reason to spend big bucks when these fit perfectly and look outstanding. My next one I will ne covering with clear bra though.
https://cimg1.ibsrv.net/gimg/www.cor...511abd8a53.jpg

---

---

Originally Posted by iw172 (Post 1598828313)

https://cimg2.ibsrv.net/gimg/www.cor...89666c4e9.jpeg
I purchased these side skirts from this vendor and couldn’t be happier. excellent fit/finish/quality! fast shipping to Ohio, over the top packing too. will do business w/them again...

Originally Posted by ExtremeOnlineStore (Post 1598182057)

Originally Posted by cal45 (Post 1598182278)

Is this the Carbon Flash splitter?

Originally Posted by cal45 (Post 1598183420)

Thanks - considering this.
It is a direct fit on a '13 Grand Sport using the existing bolts, correct?

Also, like that you posted this statement in post #1:
We offer FREE domestic shipping up to 48 states. All orders will be shipped within 2-3 business days. Every item will be inspected and re-polished before we ship out the orders.

** PM just sent **

Originally Posted by Jaime-Corvette (Post 1598188698)

Would you let any of us know when you will have side rocker panels and front splitter for the base c6 available?