WEAPON-X: ZTX Wing aka larger C7 ZR1 Style Wing
We are in the process of making the complete conversion kit for the ZTK wing only a little larger aka the ZTX wing for all C7 models including the ZR1. And we will be offering the ZTX front splitter and end caps to balance out the downforce. That will not be far behind!
ETA December 2018! The GM kit is over $5,500 if you can even get it, we will be targeting the $3500 range for the complete kit. ZR1 owners with the ZTK wing already will only need the stands and wing, so looking around $2500 unless you guys want the body wing which will be slightly more aggressively ramped off the back of the car. The OEM stands are just cast AL, so even if you wanted to keep the OEM height, you need to replace them with our stronger billet units for the larger wing. This will include:
http://i10.photobucket.com/albums/a1...pskdww7uht.jpg |
Interesting
|
My hero! Are you going to offer the higher mounts in a stand alone buy option as well?
Your valve covers came out nasty bro, did you powder coat or paint them? Also are they available with custom engraving (CNC)? -Thanks Brian |
Will it tie to the frame like the ZR1 supposedly does I don't have mine yet so I not sure how they tie it in behind the bumper? I could be interested in one for my ZO6.
|
*subscribed*
PLEASE make it tasteful! I like the idea but always worry when a company tries to add on to a very well designed car. This is not a doubt directed specifically at you, but based on my experience in the BMW aftermarket. I hope that your performance goals can be met along with keeping the aesthetics of the ZR1. If you want any pro-bono professional opinions I'm quite good at seeing how small tweaks can improve a design's balance. I have no bias - it's your product not mine. But I'm happy to help, just PM me. |
Originally Posted by MustOBeenYellow2015Z
(Post 1598018665)
My hero! Are you going to offer the higher mounts in a stand alone buy option as well?
Your valve covers came out nasty bro, did you powder coat or paint them? Also are they available with custom engraving (CNC)? -Thanks Brian Yes, those are just for you Brian LOL, but seriously should be pretty cool 50mm higher puts it right above the roof like the ACR. Still in CFD testing, but looks promising with our billet brackets vs the OEM cast ones. http://i10.photobucket.com/albums/a1...psai4zkdqv.jpg http://i10.photobucket.com/albums/a1...psyxal2bqg.jpg http://i10.photobucket.com/albums/a1...psa7uvd6tb.jpg
Originally Posted by duanesZ06
(Post 1598018714)
Will it tie to the frame like the ZR1 supposedly does I don't have mine yet so I not sure how they tie it in behind the bumper? I could be interested in one for my ZO6.
|
How do we balance it with the front?
|
Please also make front canards. If your wing has more down force, front canards will help balance the front and rear.
|
Originally Posted by JRRZR1
(Post 1598024583)
Please also make front canards. If your wing has more down force, front canards will help balance the front and rear.
|
From Ben's first post: "We are in the process of making the complete conversion kit for the ZTK wing only a little larger aka the ZTX wing for all C7 models including the ZR1. And we will be offering the ZTX front splitter and end caps to balance out the downforce. That will not be far behind!
ETA December 2018!" |
Cool. Gonna look insane.
|
Originally Posted by village idiot
(Post 1598024122)
How do we balance it with the front?
http://i10.photobucket.com/albums/a1...ps2ndofl5u.jpg |
Originally Posted by BearZ06
(Post 1598027585)
From Ben's first post: "We are in the process of making the complete conversion kit for the ZTK wing only a little larger aka the ZTX wing for all C7 models including the ZR1. And we will be offering the ZTX front splitter and end caps to balance out the downforce. That will not be far behind!
ETA December 2018!" |
This wing will be in the same location as the OEM spoiler, just higher? So theoretically even more hatch clearance then?
Any thoughts of doing the splitter without the batarang, just a smooth curve across? |
Originally Posted by irvbulldogs72
(Post 1598037282)
This wing will be in the same location as the OEM spoiler, just higher? So theoretically even more hatch clearance then?
Any thoughts of doing the splitter without the batarang, just a smooth curve across? As for the splitter, I love the current look. It looks a lot like my original C7 splitter with the winglets when that first came out in 2014. :) |
Bump for updates.
|
Originally Posted by irvbulldogs72
(Post 1598353542)
Bump for updates.
the C7 ZR1 front bumper "eye brow" molds are done and they're in the queue to make, which should be ready in 4-6 weeks! |
^^^ Specifically the taller uprights and the larger wing. Also curious if you have a line on the spoiler conversion parts for GS and Z06 owners.
|
Originally Posted by irvbulldogs72
(Post 1598356100)
^^^ Specifically the taller uprights and the larger wing. Also curious if you have a line on the spoiler conversion parts for GS and Z06 owners.
https://weaponxmotorsports.com/produ...14290154881073 Pre-orders will save BIG now vs. waiting till the production batch is done! ;) https://weaponxmotorsports.com/produ...14290161434673 |
Following.
|
All times are GMT -4. The time now is 06:42 AM. |
© 2024 MH Sub I, LLC dba Internet Brands