2 post lift
Anybody out there know of a nice 2 post lift for sale? The Florida area would be great or a new one with installation,,,,,,,,,,,,,,,,,,,,,,,,,,
|
Keep an eye out on eBay or Craigslist. I purchased two Rotary lifts that were on eBay. They were listed by someone that was 10 miles away. He had a restoration shop that was downsizing. I had my pick of 6 lifts. I hired the local Rotary lift dealer to deinstall/install them for a nominal fee. I transported them home on my car trailer. Bob K. |
I'll keep my eyes open for you also Roger ! I just bought one from the mechanic shop next to mine ! I keep forgetting to look at the lift rating but I know that it's over 10,000 pound rating and only cost me $500. |
Originally Posted by SPCL FX
(Post 1598035484)
I'll keep my eyes open for you also Roger ! I just bought one from the mechanic shop next to mine ! I keep forgetting to look at the lift rating but I know that it's over 10,000 pound rating and only cost me $500. RVZIO |
Originally Posted by rvzio
(Post 1598037110)
Great buy Ray, let me know if you come across something. Thanks!
RVZIO The mechanic that has it says he has a line on two more and there will be more details tomorrow! He is keeping one of the two ! I'll let you know more tomorrow! |
Originally Posted by SPCL FX
(Post 1598037650)
I just came back from my shop and the one I am buying is indeed rated for 15,000 lbs ! The mechanic that has it says he has a line on two more and there will be more details tomorrow! He is keeping one of the two ! I'll let you know more tomorrow! |
Originally Posted by rvzio
(Post 1598038792)
Boy , that's exciting Ray. Greatly appreciated!
Now the good news! Another friend of mine ( the electrician for the shops I manage) said he has a friend that has one for sale ! He's going to check with him tomorrow and make sure he still has it and I'll see him again tomorrow because he has to replace some main power boxes and fuse blocks too ! Hopefully we can make this happen for you ! Ray |
Thanks Ray, appreciate the help and time out of your day!
RVZIO |
Pm sent ! |
Believe it or not check amazon... No bull buddy bought one and I am doing same this winter.
|
Originally Posted by gunnerja
(Post 1598051012)
Believe it or not check amazon... No bull buddy bought one and I am doing same this winter.
https://www.amazon.com/gp/product/B0...N9FLU60S&psc=1 Whats the difference between a Rotary brand and this brand? Reason I was asking is because we paid close to $6500. for the ones we have about 6 -7 years ago. The rotary ones we have are also rated at 9000 . Just curious cause I will be selling these two soon and trying to figure out a asking price... https://cimg9.ibsrv.net/gimg/www.cor...b53fecf3e9.jpg |
ALI Certified
Originally Posted by redcruz1120
(Post 1598051844)
Whats the difference between a Rotary brand and this brand? Reason I was asking is because we paid close to $6500. for the ones we have about 6 -7 years ago. The rotary ones we have are also rated at 9000 . Just curious cause I will be selling these two soon and trying to figure out a asking price...
https://cimg9.ibsrv.net/gimg/www.cor...b53fecf3e9.jpg Bob K. |
Originally Posted by Bob K
(Post 1598052371)
I have two Rotary SPOA9 lifts and a Mohawk A-7 in my garage. All three are American made. Parts and service are readily available. I purchase all three used. Even used the cost was more than the Chinese lifts. I had the respective dealers deinstall and reinstall them. My Mohawk is over 20 years old and works great. Bob K. |
2 Post Lift
Originally Posted by rvzio
(Post 1598033907)
Anybody out there know of a nice 2 post lift for sale? The Florida area would be great or a new one with installation,,,,,,,,,,,,,,,,,,,,,,,,,,
|
Originally Posted by 62 Chevy Man
(Post 1598054716)
Local NFCA club member has one for sale. Will send you a PM with his contact information. Bill
RVZIO |
Originally Posted by rvzio
(Post 1598055186)
Thank You Bill I will give him a call.
RVZIO The second one one has also fallen thru ! The guy decided that he wanted to keep it ! Ill keep looking until I find one or you buy one ! |
Originally Posted by SPCL FX
(Post 1598056632)
Hi Roger ! The second one one has also fallen thru ! The guy decided that he wanted to keep it ! Ill keep looking until I find one or you buy one ! |
Originally Posted by redcruz1120
(Post 1598051844)
Whats the difference between a Rotary brand and this brand? Reason I was asking is because we paid close to $6500. for the ones we have about 6 -7 years ago. The rotary ones we have are also rated at 9000 . Just curious cause I will be selling these two soon and trying to figure out a asking price...
https://cimg9.ibsrv.net/gimg/www.cor...b53fecf3e9.jpg Good luck with your search and us boys with our toys :) :steering: |
One of the forum members turned me on to a lift that I will be checking out Sat. morning. We'll see!
RVZIO |
All times are GMT -4. The time now is 08:52 AM. |
© 2024 MH Sub I, LLC dba Internet Brands