CorvetteForum - Chevrolet Corvette Forum Discussion

CorvetteForum - Chevrolet Corvette Forum Discussion (https://www.corvetteforum.com/forums/)
-   C7 General Discussion (https://www.corvetteforum.com/forums/c7-general-discussion-142/)
-   -   Clip (https://www.corvetteforum.com/forums/c7-general-discussion/4202618-clip.html)

barry renaud 10-17-2018 02:02 PM

Clip
 
A clip fell of my 2019 G S, after the Teck took the door panel off and found the clip he can not find where it goes back on? It affects the window stabilization when down when closing the door it sounds bad, glass shakes a bit and just sound like an old car!

Avanti 10-17-2018 04:51 PM

That is exactly why GM goes to the trouble to create Parts Manuals. Tell them to either look it up and replace it correctly, or pull the panel and look at a new one in stock. It is their job and NOT rocket science... fortunately. All the best! :yesnod:

Gearhead Jim 10-17-2018 05:49 PM

Avanti is correct but OP could post a picture of the part here and perhaps "help the helpers" get quicker/better results.

wrecker3 10-17-2018 09:26 PM

https://cimg4.ibsrv.net/gimg/www.cor...965281b5c6.gif

rmorin1249 10-17-2018 09:28 PM

Another incompetent dealer and unqualified tech. GM has a real problem. Wish I could help.

barry renaud 10-18-2018 09:11 AM

Small town small dealership actually one of 2 of the best tecks I have ever known. He actually called me to tell me he is really looking to find a solution, has been in contact with G M, you know how slow those wheels turn! T Y. Barry.

carsnpars 10-18-2018 09:44 AM

Clip
 
take the other door panel off, its not but a two minute job. More if you take the speaker out.

Rebel Yell 10-18-2018 03:16 PM

I can't help on where the clip goes, sorry. But I suggest instead of trying to find out where it goes, I'd first find me another Tech. The one you have is broken.

F4 Phantom 10-18-2018 07:31 PM


Originally Posted by Rebel Yell (Post 1598182355)
I can't help on where the clip goes, sorry. But I suggest instead of trying to find out where it goes, I'd first find me another Tech. The one you have is broken.

:iagree:


All times are GMT -4. The time now is 05:46 PM.


© 2024 MH Sub I, LLC dba Internet Brands