5” Intake
Has anyone tried a 5” intake on our cars to see how they do? Thinking about building one to see how it compares to the halltech.
|
Originally Posted by RowboatLS3
(Post 1598234382)
Has anyone tried a 5” intake on our cars to see how they do? Thinking about building one to see how it compares to the halltech.
|
Originally Posted by 16/C7Z
(Post 1598234509)
being developed by a shop near me. Not sure about others.
|
I have one on my car. It’s a procharger f1a-94 set up and I picked up 3lbs of boost with the intake. JTM Motorsports makes a 5” intake which is what I am using. My car just went 8.92 at 157mph so their intake definitely works. |
I’m trying to run one on the stock blower |
Originally Posted by David4359
(Post 1598235607)
I have one on my car. It’s a procharger f1a-94 set up and I picked up 3lbs of boost with the intake. JTM Motorsports makes a 5” intake which is what I am using. My car just went 8.92 at 157mph so their intake definitely works. What TB are you using? |
Go to the c7 forced induction section, there is a write up on my car with pics |
Originally Posted by RowboatLS3
(Post 1598234382)
Has anyone tried a 5” intake on our cars to see how they do? Thinking about building one to see how it compares to the halltech.
|
I know Kong performance has one for the c6 zr1 5” out of carbon fiber. New Era has a 4” for the CTSV I’ve been on the hunt but nothing yet for the c7 lt4 :( I’m not even sure a stock supercharger would even benefit from such a big intake |
yes one has been made and showed some great gains on a maggie setup. I'm not saying who it is because they aren't ready to release it yet (it's not us btw)
|
Joe, how far are they from having it for production? |
Originally Posted by RowboatLS3
(Post 1598234382)
Has anyone tried a 5” intake on our cars to see how they do? Thinking about building one to see how it compares to the halltech.
Originally Posted by avtarv
(Post 1598320021)
Im interested in this too. Keep me posted.
Originally Posted by Z06Farmer
(Post 1598325013)
I know Kong performance has one for the c6 zr1 5” out of carbon fiber. New Era has a 4” for the CTSV I’ve been on the hunt but nothing yet for the c7 lt4 :( I’m not even sure a stock supercharger would even benefit from such a big intake
Originally Posted by HNK
(Post 1598334280)
Joe, how far are they from having it for production?
Originally Posted by RowboatLS3
(Post 1598234382)
Has anyone tried a 5” intake on our cars to see how they do?
Anyone who wants a carbon 3D printed one now though, I can have one done in 2 weeks! And I'll make you guys a deal... I'm willing to send you guys FREE the carbon fiber air intake tube and filter once we get them in to swap out with the return of the carbon printed tubes. https://weaponxmotorsports.com/produ...14262400581681 |
Originally Posted by Ben@WeaponX
(Post 1598338575)
Already made, tested, picked up major power and we're in the carbon fiber molding process now. We had an LT4 blower C7 Z06 making 850whp/850wtq with our heads/cam, ported blower and this intake! This is also the same intake I used to run my 9s C7 ZR1 passes ;)
Anyone who wants a carbon 3D printed one now though, I can have one done in 2 weeks! And I'll make you guys a deal... I'm willing to send you guys FREE the carbon fiber air intake tube and filter once we get them in to swap out with the return of the carbon printed tubes. https://weaponxmotorsports.com/produ...14262400581681 https://farm2.staticflickr.com/1912/...626b63ec_z.jpg https://farm2.staticflickr.com/1961/...5b0f7cba_z.jpg Will a tune be required for the 5" intake? Or just recommended? My C7Z is currently turned with an aFe intake, Kooks 1 7/8" headers and catless x-pipe. |
Ben i am very interested. Will you include the MAF data? What sort of gains that had over a AFE or a Halltech? |
Originally Posted by ahero4eternity
(Post 1598338641)
PM sent!
Will a tune be required for the 5" intake? Or just recommended? My C7Z is currently turned with an aFe intake, Kooks 1 7/8" headers and catless x-pipe.
Originally Posted by HNK
(Post 1598338688)
Ben i am very interested. Will you include the MAF data? What sort of gains that had over a AFE or a Halltech? |
Ben, hurry up with the intake |
Originally Posted by HNK
(Post 1598340715)
Ben, hurry up with the intake |
CF one. What’s the material of the 3DP one and cost? Pm me on both |
Ben, will this new Intake tube work on a ZR1 with the GM CAI box?
|
Originally Posted by Ben@WeaponX
(Post 1598370677)
the 3DP one or the carbon fiber production unit? ;)
|
All times are GMT -4. The time now is 05:06 AM. |
© 2024 MH Sub I, LLC dba Internet Brands