|
★Protect Your Paint!! Cleartastic Easy DIY Paint Protection kits!
https://cimg7.ibsrv.net/gimg/www.cor...95ce9eafc7.png
The Number#1 Do-It-Yourself Paint Protection Kits Since 1996 It’s not if, it’s when… Unfortunately your beautiful Corvettes curves come at a cost. Certain areas of your paint are very vulnerable to being showered by rocks and getting chipped up. Cleartastic’s pre-cut kits create an invisible barrier protecting your paint from what could be an expensive day out for a cruise. CleartasticŪ now has kits specifically developed for older gen corvettes too! These kits like all of our kits are designed so anyone can apply them and get professional results! Each kit comes with easy step by step instructions. Applies in minutes! CleartasticŪ is a clear high end flexible film that helps protect your delicate paint from chipping, scratches & stains. The film has “Self-Healing” Characteristics so scratches & swill marks will vanish automatically overtime! The new film also has stain resist properties. This all adds to a longer lasting better looking film. Unlike the prior film this new CleartasticŪ film has adhesive making it a "Set & Forget" application. Apply it once and it will provide years & years of protection. Smooth as glass appearance helps make it invisible once applied. Wash & wax over the film simply treat it like your paint. A great alternative to mud flaps/guards. Protection For In Front Of Your 68-82 Rear Wheels - Kit#14-CC https://cimg8.ibsrv.net/gimg/www.cor...311e4f4a77.jpg https://cimg0.ibsrv.net/gimg/www.cor...15bfddf2de.jpg Only $39.95! CLICK HERE For 68-82 "Front of Rear Wheel" Protection ________________________________________ ____________ Protection For Behind Your 74-82 Rear Wheels -Kit#15-CC https://cimg7.ibsrv.net/gimg/www.cor...2af0995189.jpg https://cimg6.ibsrv.net/gimg/www.cor...535d54489a.jpg Only $39.95 CLICK HERE for 74-82 Behind Rear Wheels ______________________________________ Combo Kit & SAVE! -Kit#29-CC https://cimg1.ibsrv.net/gimg/www.cor...2f0027f3f4.jpg Only $74.95! CLICK HERE For Combo Kit to SAVE Feel free to order securely online 24/7. Contact us if you have any questions. Email sales@tkoperformance.com Phone 1800 778 9898 Thank you! :thumbs: |
A few quotes about Cleartastic kits from Forum members.....
Originally Posted by 7LitreC5
(Post 1594521565)
I installed the Cleartastic kit on my C7 and it came out great. I'd never done anything like that before and it really wasn't that difficult.
Originally Posted by MontanaZR1
(Post 1597959425)
Product is great, next to unnoticeable and easy to install.
Originally Posted by TXshaggy
(Post 1597502679)
….. Went with the cleartastic product and couldn’t be happier.
2016 Z07 with full side skirts and gm splash guards front/rear
Originally Posted by John Micheal Henry
(Post 1597217792)
My rocker kit installed very easy. Hardest part was pulling the factory plastic off. This kit offers better coverage that the factory….
… Looks great and I can't really tell where the edges are on my LRG.. Thanks for a great product :thumbs:
Originally Posted by ArcsandSparks, post: 2335265, member: 34421
Installed mine a few days ago and I have nothing but good things to say. Applying the film is simple, and the fit & finish is great……
Originally Posted by My11thVette
(Post 1596196603)
This product gets the job done. Support our small business vendor, Ed is a great guy and does not release a kit unless it is perfect. Very simple to install if you follow the directions. I have bought 4 kits from TKO and it was money well spent.
Originally Posted by SharkbyteLT4
(Post 1592889100)
I had them on when I first got my Z. you can't beat the protection for under hundred bucks. The area behind the front wheels was a bitch to put on while the rest was a piece of cake.
Originally Posted by enventr
(Post 1597362391)
I met some people at corvette car shows that had their entire car covered with this product. It looked great and I could not tell it was on.
Originally Posted by conlaurant
(Post 1592892351)
Great product, EZ install. Imperfections (from a novice installer like myself) usually disappear after curing as well as being in the sun..... Used it on my C6
Originally Posted by BERETTA
(Post 1592885061)
I have used their products and I like them. I just put on a set of the rear quarter panel pieces and they turned out good and provide protection where you need it. :thumbs:
Originally Posted by LGK-SD
(Post 1591867714)
Only kit I got from ClearTastic is the one for the leading area of the rear fender area just behind the doors. They were cut perfect and went on like they said they would. Gotta see what other cars they make products for.
Originally Posted by Strake
(Post 1591884477)
….. Easy to get ahold of, and the kind of company any of us would like to buy from.
|
:cheers:
|
:thumbs:
|
Hope everyone had a happy Thanksgiving! :cheers:
|
Do you offer a kit for the C2's?
Greg |
Originally Posted by Greg
(Post 1598382869)
Do you offer a kit for the C2's?
Greg https://cimg8.ibsrv.net/gimg/www.cor...d4f58a3033.jpg Protects a good portion behind the rear wheels. http://www.cleartastic.com//63-67-Re...Pair_p_36.html |
Perfect. Thank you.
|
Originally Posted by Greg
(Post 1598383011)
Perfect. Thank you.
|
I hope your Christmas was fantastic and that the fat man brought you everything you wanted!
Orders placed over the holidays will be shipping today. Tracking numbers will be emailed to the emails address provided. Thank you. Happy New year! Cheers! |
Do you have a kit for the convertible rear deck on a c3?
|
Originally Posted by red topless gator
(Post 1598576989)
Do you have a kit for the convertible rear deck on a c3?
|
Orders for the week have shipped. Please check your email for tracking info.
Thank you for the orders. :thumbs: |
#1 DIY kits since 1996!
Super easy to apply. Perfect fit. Gloss finish. Invisible once applied. Tough as nails. :thumbs: |
How about C1?
|
If you made a reproduction of the factory convertible deck protector on '94 - '96 Corvettes, GM part # 12524512, I know several people who would buy one - including me.
|
Originally Posted by fberus
(Post 1598701249)
If you made a reproduction of the factory convertible deck protector on '94 - '96 Corvettes, GM part # 12524512, I know several people who would buy one - including me.
Originally Posted by Hollywood41
(Post 1598691925)
How about C1?
|
Originally Posted by Cleartastic
(Post 1598704355)
Are all the C4 convertible deck lids in that area the same. Or did they change it in 94?
|
Originally Posted by fberus
(Post 1598708176)
Good question. There was only one part number change for the C4 convertible deck lid. The number changed between the '88 and '89 model year. '89 through '96 all used part number 10276994 and the C4 parts catalog I have states that the 12524512 protector is for '89 to '96 deck lids.
As for the part, if I could get my hands on a template, the answer would be Yes. We would make them in a heartbeat with our film. . :thumbs: Ed |
:cheers:
|
| All times are GMT -4. The time now is 11:48 PM. |
© 2024 MH Sub I, LLC dba Internet Brands