Opinions Requested
G'day All,
I am going to put some "350" badges on my bonnet and am struggling to decide where to place them, so I'm asking my fellow CF members for their opinions based on the three photos below. I don't need long winded replies, just select a number and let me know. TIA Mark 1) https://cimg1.ibsrv.net/gimg/www.cor...c919efc48b.jpg 2) https://cimg7.ibsrv.net/gimg/www.cor...5d896cfefe.jpg 3) https://cimg4.ibsrv.net/gimg/www.cor...5decadac49.jpg |
My opinion is to leave them off, fill the holes and go badge-less. |
|
OCB,
This was not an option!!!! My car will have badges!!! |
I like #2
|
#3 and can I please see a pic of your interior, specifically the right hand drive?! is it factory? |
I think they would look better between #2 and #3
|
Originally Posted by ganshert
(Post 1598320594)
#3 and can I please see a pic of your interior, specifically the right hand drive?! is it factory? No, not factory, none ever offered to date. https://cimg1.ibsrv.net/gimg/www.cor...7f915d131c.jpg https://cimg2.ibsrv.net/gimg/www.cor...fe8fd37881.jpg |
For me the second picture is by far the best location.
|
Originally Posted by M A Fry
(Post 1598320497)
G'day All,
I am going to put some "350" badges on my bonnet and am struggling to decide where to place them, so I'm asking my fellow CF members for their opinions based on the three photos below. I don't need long winded replies, just select a number and let me know.* TIA Mark 1) 2) 3) #2 slightly further back....:hide: |
I would choose #2
|
Big block hood on a 350....best place for the badges is in your pocket.
|
3 imho
|
I have 2 hoods. One says L48, other L82. Thinking of cutting the second numbers off and switching them...
|
Originally Posted by DUB
(Post 1598322065)
I like #3 due to the emblem does not take away from the look of the hood where it is unique.
If you found a '350' emblem that was not so big...then going back up to the front would be fine due to it might not be like so much...;'in your face' and standing out and look cleaner. I would use 3M double sided light gray tape on them so if you want to move them you can and not have any holes needing to be drilled in the hood.. DUB I don't need long winded replies, just select a number and let me know. I dont know im not one to normally side with the factory knows best but they where pretty on with this https://cimg2.ibsrv.net/gimg/www.cor...954e6cef24.jpg https://cimg1.ibsrv.net/gimg/www.cor...b56282e98f.jpg https://cimg4.ibsrv.net/gimg/www.cor...9ce9841292.jpg But yeah, dare to be different....:cheers: |
Another vote for #2.
|
I originally place my badge on the #2 position but later moved them to #1 after modifying the hood for RamJet and adding LT-1 stripes
http://www.vettemod.com/forum/imageh...e08382adc9.jpg http://www.vettemod.com/forum/imageh...61e013d9aa.jpg Your car your choice but I like 1 |
I think the #3 position might look better if you moved it a few inches ahead like GM did on the later C3s:
https://cimg7.ibsrv.net/gimg/www.cor...470969bea1.jpg |
To me it`s absolutely # 3 , somewhere within the range where you put it and what Priya posted
|
I like number one-
That's what I went with-
Originally Posted by L-46man
(Post 1598321719)
Big block hood on a 350....best place for the badges is in your pocket.
https://cimg7.ibsrv.net/gimg/www.cor...60473a686b.jpg |
All times are GMT -4. The time now is 12:53 PM. |
© 2024 MH Sub I, LLC dba Internet Brands