Originally Posted by OVRBST (Post 1600921283)

I friggin love it! Fits PERFECT. Every bolt hole lines up like stock, the rivet holes needed a little tiny bit enlarging, but other then that the fitment is AWESOME!!
I'll take some more when I can pull it out of the garage.
https://cimg7.ibsrv.net/gimg/www.cor...bfb08b052c.jpg
https://cimg4.ibsrv.net/gimg/www.cor...a6a15c49f7.jpg
https://cimg9.ibsrv.net/gimg/www.cor...11ae00aa43.jpg

Originally Posted by Groomie (Post 1601100215)

https://cimg6.ibsrv.net/gimg/www.cor...fa68936f8.jpeg
Awesome 2.5 EOS
https://cimg7.ibsrv.net/gimg/www.cor...a5c7c4921.jpeg
Awesome job EOS. EASY AS PIE. GREAT PIECE OF ART FOR THE Z06. CANT SAY ENOUGH. GREAT PRODUCT GREAT COMPANY. SURE TO SELL MANY MORE. As soon as it is sunny more pics coming.

Originally Posted by OVRBST (Post 1600954589)

Finally some sunshine.
https://cimg2.ibsrv.net/gimg/www.cor...4e31605acb.jpg
https://cimg0.ibsrv.net/gimg/www.cor...c1b19d27f5.jpg
https://cimg5.ibsrv.net/gimg/www.cor...71ad47c82e.jpg
https://cimg9.ibsrv.net/gimg/www.cor...ba9574307d.jpg

Originally Posted by OVRBST (Post 1600908439)

Packaged incredibly well. Paint is good but not perfect. I think it may have been wrapped before it cured completely. I'll run a buffer over it and ceramic coat it before install, but I'm picky. All sorts of hardware including rivets are included. Nice setup. I think this thing is gonna look bad ass.
https://cimg4.ibsrv.net/gimg/www.cor...a46de12271.jpg
https://cimg1.ibsrv.net/gimg/www.cor...96853fd0f6.jpg
https://cimg0.ibsrv.net/gimg/www.cor...31881b5fce.jpg
https://cimg9.ibsrv.net/gimg/www.cor...3c396434e1.jpg

Originally Posted by Steel_Venom (Post 1598735831)

I have a 2014 Stingray M7 base. I haven't been super active on the forums past few years as I've been quasi-restoring my first car ('95 Mustang). Now that I wrapped that up I've been debating whether or not to trade up to a GS, but I'm sentimentally attached to my C7 & have decided just to modify it to my liking vs trading up.
So, during Christmas/New-Years weeks I installed Z06 Style Stage 2 front Splitters, Spoilers, and Grille all in Carbon Flash Metallic.
I had to wait until we got a warm enough day to install the Stinger Stripe, which I purchased from Phoenix Graphics.
Also installed a Borla S-Type Catback.

I have no experience with GM Brand parts, but I could not fathom dropping the insane prices for genuine GM Z06 Aero bits. Extreme Online Store (EOS) had actually reasonable prices.
Now, I've been burned buying cheaper parts in the past, but EOS had good reviews for other cars on other forums, so I figured I'd take a chance. I'm glad I did; everything fit perfectly. EOS had great customer service too; they forgot to include the directions for the front splitter. Sent an email & less than 24hrs I had them :)

I followed Theta's video for removing the front bumper cover. I had no problem popping the cover loose by the headlights. I pulled straight up and the popped out.
I followed YT video from "Chevy Dude" for removing the rear bumper cover to install the spoiler, with a few caveats. I didn't remove the tail lights to install the nuts. I was able to use a flex-head ratcheting wrench to get them.
Another tip for installing the spoiler; line the template up as it directs you, put the studs in the spoiler, and then set the spoiler on top of the template to ensure the studs actually line up with the holes on the template. I had to make a lot of tiny adjustments to the template to get all the studs to align with the template holes. Not that it was way off, just a lot of fine tuning. Do not tape the template down & drill holes expecting it to be perfect.

Next up; I've purchased a supercharger from Andy at A&A. It'll be a few weeks until I get to that, but I'll make a thread as I install it. Maybe that S/C will help me finish burning the tread off my factory wheels & tires so I can upgrade those too :cool:

https://cimg7.ibsrv.net/gimg/www.cor...a133e1aa74.jpg
https://cimg9.ibsrv.net/gimg/www.cor...7d02731501.jpg
https://cimg0.ibsrv.net/gimg/www.cor...5e157193be.jpg
https://cimg1.ibsrv.net/gimg/www.cor...7f40989914.jpg
https://cimg3.ibsrv.net/gimg/www.cor...7c24a66377.jpg

Originally Posted by Steel_Venom (Post 1598736184)

Sure thing! I usually take a ton of pics as I work on them so I remember how to put it back together. In this case I didn't take as many since I was mostly following videos. Here's a few I did take.
https://cimg7.ibsrv.net/gimg/www.cor...8a8c3b7a8b.jpg
https://cimg8.ibsrv.net/gimg/www.cor...79e5de3174.jpg
https://cimg9.ibsrv.net/gimg/www.cor...d85d6e913c.jpg
https://cimg0.ibsrv.net/gimg/www.cor...9dac705f35.jpg

Originally Posted by Blu-Beast (Post 1598416862)

:iagree:


https://lh3.googleusercontent.com/DP...fZguOhdAHtaV0O

Originally Posted by Not So Fast (Post 1598025840)

https://cimg9.ibsrv.net/gimg/www.cor...9d91028155.jpg
https://cimg2.ibsrv.net/gimg/www.cor...328c9a612b.jpg
https://cimg1.ibsrv.net/gimg/www.cor...c26c52d04a.jpg
Good folks to deal with, fast shipping, decent prices. I have their front splitter, side skirts, and rear spoiler on mine :thumbs:
NSF

Originally Posted by RegnaR (Post 1598070910)

https://cimg4.ibsrv.net/gimg/www.cor...bc9230187a.jpg
Carbon flash front splitter installed, thanks!

Originally Posted by gmarcucio (Post 1598536138)

I finally got around to installing my EOS front splitter and side skirts today!


https://cimg2.ibsrv.net/gimg/www.cor...c88820a150.jpg
https://cimg3.ibsrv.net/gimg/www.cor...dae7202a75.jpg
https://cimg4.ibsrv.net/gimg/www.cor...97b57ee8c0.jpg
https://cimg2.ibsrv.net/gimg/www.cor...4a6b04954d.jpg

Originally Posted by snampro (Post 1598565352)

Finished my EOS sideskirt and splitter install this week. Extremely happy (pun intended). I had an issue with a damaged item, not at all cause by EOS, and they QUICKLY replaced the item. The quality of their products is HIGH. Everything fit great and looks good. The Carbon Flash matches all the other Carbon Flash trim on the car.

https://cimg4.ibsrv.net/gimg/www.cor...6246436d21.jpg

https://cimg4.ibsrv.net/gimg/www.cor...8feb160ea3.jpg

https://cimg7.ibsrv.net/gimg/www.cor...7ea9d842ff.jpg

https://cimg7.ibsrv.net/gimg/www.cor...4032655e71.jpg
25December2018

Originally Posted by JDSC7VETTE (Post 1598413366)

https://cimg2.ibsrv.net/gimg/www.cor...7553ba5405.jpg
another
https://cimg3.ibsrv.net/gimg/www.cor...b541c09b6a.jpg
They are very durable. Everything else on my Vette is painted carbon flash so that's how I ordered mine. The OEM skirts and splitters are way over priced but if money is no oblect and in your mind you feel it's better then have at it.

Originally Posted by SoSlow1 (Post 1598413534)

:iagree: I bought the same set for my Z06 and couldn't be happier. I just went with the matte black stuff because I think it goes well with the white car.

http://i218.photobucket.com/albums/c...%20Z06/2_1.jpg

http://i218.photobucket.com/albums/c...%20Z06/1_1.jpg

Originally Posted by cvp33 (Post 1598993354)

Installed splitter and side skirts from EOS

https://i.postimg.cc/JzCjSsqk/IMG-02...k/IMG-0276.jpg
https://i.postimg.cc/2yPnkyNg/IMG-02...g/IMG-0277.jpg
https://i.postimg.cc/2jJQFcLT/IMG_02...T/IMG_0278.jpg
https://i.postimg.cc/gkZvMVvp/IMG_02...p/IMG_0279.jpg
https://i.postimg.cc/JhqC1K9B/IMG-03...B/IMG-0315.jpg
https://i.postimg.cc/k4Pq47xh/image.jpg

Originally Posted by JasonSB (Post 1598348887)

I just did the carbon side skirts from ExtremeOnlineStore and they look and fit great. Very easy to install.

Originally Posted by cmmeadows (Post 1598104249)

https://cimg6.ibsrv.net/gimg/www.cor...ee03e957d.jpeg
I also have the side skirts and rear spoiler. Fast shipping, great quality, and great fitment!

Originally Posted by Turbo6TA (Post 1598430717)

Originally Posted by mxking https://www.corvetteforum.com/forums...s/viewpost.gif
"On the front splitter is the mounting holes drilled or does purchaser have to drill holes" ?


________________________________________ ___________________

This is an excellent front chin splitter, but my Extreme Online Store ZR1 style front splitter had no pre-drilled holes in it ... Had to drill my own

What's the deal with that ?

https://i.imgur.com/jcY3sHw.jpg

Originally Posted by Turbo6TA (Post 1598297651)

The ZR1 front splitter from Extreme Online is packaged very good ...

Here is how mine arrived at my house:

https://i.imgur.com/C0o5Lgu.jpg

Originally Posted by Rick@RKT Performance (Post 1598392144)

Finally had a chance to install the replacement. Perfect fit and looks beautiful!

https://cimg5.ibsrv.net/gimg/www.cor...fcbef382a.jpeg

https://cimg6.ibsrv.net/gimg/www.cor...484001f54.jpeg

https://cimg4.ibsrv.net/gimg/www.cor...afcff4e8c.jpeg

Originally Posted by Turbo6TA (Post 1597890006)

Just a little thumbs-up for the Extreme Online Store.

I purchased my ZR1 style front chin splitter and my ZR1 style rear spoiler from them ... perfect fit right out of the box and fast free shipping

The only thing I had done extra to the rear spoiler was to have it carbon fiber hydro-dipped prior to installing it ... The front chin splitter is just as it came out of the box.


DISCLAIMER: I don't work for this company and don't know any of there employees ... I just am happy with there products

https://i.imgur.com/9Y3wVxK.jpg

https://i.imgur.com/CoSjLd0.jpg

https://i.imgur.com/XySfrO8.jpg

https://i.imgur.com/wSMD2cS.jpg

https://i.imgur.com/FAYim2V.jpg

Originally Posted by Rick@RKT Performance (Post 1598295196)

I just want to post here and let everyone know what a great experience I had with ExtremeOnlineStore

When I got my first front CF splitter, a part of the weave was not straight. I contacted them and they sent me a shipping label and took care of it right away. The replacement is perfect. I'll post some pics when I get it installed.

Rick

Originally Posted by snampro (Post 1598503196)

same. had one small issue with my order, already addressed by them, quick response as mentioned. Def will order from them again

update: installed the splitter and winglets, very happy, parts are high quality and fit well.

I will say all of the "problems" I've seen on this forum with this kit are not EOS' fault. Yes, if you already have a splitter, like I did, you will need to drill out the old rivets, which is easy, and yes the supplied bolts then won't fit as the holes are larger, I just used plastic push pins/rivets you can buy at Lowe's or O'Reilly, then the install looks original.
https://cimg7.ibsrv.net/gimg/www.cor...b136cfb154.jpg
https://cimg8.ibsrv.net/gimg/www.cor...ce99a5f10d.jpg

Originally Posted by village idiot (Post 1598013376)

For what it's worth, I have a carbon one and it's pretty good quality, great for the price. Customer service isn't as awful as C7Carbon. My carbon wave isn't straight in spots, but not that bad and it definitely requires some drilling for additional bolt holes. Get a good mask, long sleeve shirt and some patience to mark it all off. Took me about 3 hours to install the splitter because of drilling and stuff, start to finish.

I wish they had the tabs underneath so I could add the underbelly to make the splitter effective, but for $2000 cheaper than OEM, I'm not complaining.

Originally Posted by ZyberMunster (Post 1598545306)

EOS Carbon Flash skirts on my GS, excellent fitment, packaging, pricing and service.
https://cimg0.ibsrv.net/gimg/www.cor...33c378df1b.jpg
https://cimg3.ibsrv.net/gimg/www.cor...a5d740da7c.jpg

https://cimg4.ibsrv.net/gimg/www.cor...669ccca7e6.jpg
https://cimg7.ibsrv.net/gimg/www.cor...b04dcb0637.jpg