|
C3 Vintage Race Corvette
1982 C3 Vintage Race Corvette
This car was hand built by John Staab to run GT1 2 full race log books documented with events in Daytona, Texas, California Leguna Seca, Edmonton Indy and more Front runner in the Pacific Northwest; Podium car as the fastest small block C3 in the NW (lap record at Spokane 2017) Toms HD rear Diff with cooler 3.70 gears Greenwood 5 link rear suspension (coil over) 4 corner Wilwood 6 piston Grand National calipers Dry sump oiling system with oil cooler C&R race radiator dual fuel pumps with a 30 gallon fuel cel dual MSD ignitions Greenwood widebody style with all the original moulds Denny's nitrous half shafts and Tom's HD outer spindles full cage that has certification to run any vintage event in North America This is a fast, fun, easy to drive, well sorted high quality track proven build. Sold as a complete roller with various spares. Further information and details contact Ralph at 1-403-804-8121 and/or support@safesobersecure.com $17,000.00 As per the Forum rules: I am listing this Race Car on behalf of a very close friend of mine, who I can personally vouch for, who has maintained the utmost in integrity over 20 yrs we have known each other. The owner felt the Forum would provide good exposure for many who would appreciate a purpose built race car. I have provided direct contact details for the owner, but will pledge to provide my assistance in any unlikely matters that may arise. https://cimg7.ibsrv.net/gimg/www.cor...76b48382ed.jpg https://cimg9.ibsrv.net/gimg/www.cor...d24dd7cc05.jpg https://cimg1.ibsrv.net/gimg/www.cor...dbbd77d4c2.jpg https://cimg3.ibsrv.net/gimg/www.cor...ffbff864d9.jpg https://cimg7.ibsrv.net/gimg/www.cor...aabd7eb6c9.jpg https://cimg5.ibsrv.net/gimg/www.cor...30b8477285.jpg https://cimg1.ibsrv.net/gimg/www.cor...8da1869e60.jpg r |
Looks good, details on engine please. Mark |
Pretty sure “roller” means no engine, especially at that price. Drop in a nice small or big block engine and have a fun track day car and vintage race it too. Wish I had room for it. GLWTS |
Mark....It could possibly be sold as a turn key set up, but certainly not at that price. If you are serious about the car, contact Ralph at the info provided and see what can be worked out.
|
Curious newbie to vintage racer stuff but,
which vintage classes would it would race against ? |
It can participate in any Vintage event for large bore or wings and slicks.....SOVREN( the Society Of Vintage Racing ENthusiasts ) , SVRA ( Sportscar Vintage Racing Association ) etc. The Car was extremely competetive when raced in Group 3 and Group 7b in SOVREN. Tire selection( treaded vs slicks) opens up the ability to run in several different classes. Tech requires fuel cell/safety equipment etc. Car has passed tech every time, with the most recent events in summer of 2018. This Car will qualify in any Vintage club across the country. Each club designates the vehicle class according to year/engine size/tires.
|
Originally Posted by JScott
(Post 1598462451)
Pretty sure “roller” means no engine, especially at that price. Drop in a nice small or big block engine and have a fun track day car and vintage race it too. Wish I had room for it. GLWTS |
Top Podium Race Car built with the best parts available. Just needs a small or big block engine and trans to go racing. Turn key combo available on request.
|
| All times are GMT -4. The time now is 10:51 AM. |
© 2024 MH Sub I, LLC dba Internet Brands