1969 tri power
Did the 1969 400HP 4-speed with air conditioning use an idle control solenoid or was this only used on automatics?
Thanks. |
Mine doesn’t have one either. It’s a November build and I have been told they didn’t have them until later on in the year. |
Originally Posted by JBrooke825
(Post 1598509312)
Mine doesn’t have one either. It’s a November build and I have been told they didn’t have them until later on in the year. |
All cars with A/C had the solenoid is the heavy gauge pink wire still there tucked away on the firewall somewhere ?
|
Must be taped-up with the wire harness as I don't see anything out of place. It would have some kind of plastic connector attached (perhaps cut-off) but nothing is visible that I can see.
|
I found an old thread on this look above
|
here is the thread, on the bottom of the picture from the AIM it states with M20 and M21
https://www.corvetteforum.com/forums...d-bracket.html |
Thanks, that was very helpful and answers my questions!
|
All times are GMT -4. The time now is 04:16 AM. |
© 2024 MH Sub I, LLC dba Internet Brands