17x9 , 17x11 Wheels From My '87
….. SOLD ... SOLD … Used Wheels Off my '87 … They are American Racing 190's (As I Recall) … Fronts are 17x9 with 275/40 Goodyear Eagle F1's , rears are 17x11 with 335/35 Michelin Pilot Sports … the tires still have good tread but are getting old … like 2007 old … they are still mounted but I can have them taken off for shipping … the good news is they will bolt on to an early C4 without adapters or spacers … the bad (to some) with the 335's , the rears stick out of the wheel wells by about 3/4" … I have all 4 center caps and screws … I ran them without the caps … $500 plus shipping with or without the rubber …..
https://cimg0.ibsrv.net/gimg/www.cor...74e9b5228c.jpg https://cimg0.ibsrv.net/gimg/www.cor...851d773685.jpg https://cimg7.ibsrv.net/gimg/www.cor...7d2b491971.jpg https://cimg9.ibsrv.net/gimg/www.cor...61c2c5c03f.jpg https://cimg1.ibsrv.net/gimg/www.cor...55cab4ffa0.jpg https://cimg5.ibsrv.net/gimg/www.cor...7cd062a90d.jpg https://cimg9.ibsrv.net/gimg/www.cor...0064ecb9af.jpg https://cimg6.ibsrv.net/gimg/www.cor...730d399c8d.jpg |
….. Still available ! …..
|
..... :thumbs: …..
|
..... Still Got 'em …..
|
….. Still Available ! …..
|
………. :thumbs: ……….
|
..... Anybody need some 11" wide rear wheels for an early (pre-88) C4 ? These bolt right on with NO adapters …..
|
Location?
|
Originally Posted by slow_zo6
(Post 1599625441)
Location?
….. Presently located in Largo Florida … Tampa Bay area ….. |
..... Still Available ! …..
|
….. Bump it up ! …..
|
..... Taking up a lot of space … I need these to go to a good home …..
|
You have some parts. They don't look to bad without the center cap. Wish it was closer shipping would kill me.
|
If you ever plan on taking a road trip towards St.Louis Mo. let me know...
|
Originally Posted by TommyFox
(Post 1600740431)
If you ever plan on taking a road trip towards St.Louis Mo. let me know...
|
Originally Posted by C409
(Post 1600742526)
..... Is that near Orlando ? …..
|
..... Still Available ! … These are BOLT-ON for early vette's … NO spacers/adapters needed …..
|
What is needed to run these on an 89 car?
|
Originally Posted by Cam813
(Post 1601459786)
What is needed to run these on an 89 car?
|
Ahh I see. I am with you on it not looking good being that far out. I know I could get GS style a molds but those are so common, I really love this style wheel and the dymags etc. It's a shame nobody makes stuff like this anymore, but then again, it doesn't really fit on cars not in this period
|
All times are GMT -4. The time now is 10:29 PM. |
© 2024 MH Sub I, LLC dba Internet Brands