Halltech's first ad for our MF103
 

This ad was done for one of the Corvette magazines back in 2006.

https://cimg0.ibsrv.net/gimg/www.cor...52b8db57bc.jpg
(Phone number is no longer in use since we moved to Ixonia, WI in 2015.)

Katech dynoed our 2008 Z06 with my tuning at 535 RWHP, which broke their standing record at the time of 505 RWHP, with another intake on their dyno.

Over the next 13 years, with annual modfests, that same 2008 Corvette dynoed at 622 RWHP with Katech's mods and our CF112 Carbon Beeline package. Imagine this horsepower in a carbon fiber Z06 at 2790lbs!

https://cimg9.ibsrv.net/gimg/www.cor...e4046df396.jpg

Send multiple PM's with questions about your intake. Never received any response.

I'm here now.

Tried to send a PM but got this error message:

"1. Halltech has exceeded their stored private messages quota and cannot accept further messages until they clear some space."

I PM'ed because I was interested in a Halltech Beehive shroud for a stock Grand Sport or Z06 intake. I saw a thread a few years ago where Halltech had made some of these. Even if it is a bit more expensive than the normal Beehive shroud, I would like to purchase one.

Thanks.

I have the mf103 on my Z06, I do like it.

And still no follow up from Halltech.

Have send e-mails and multiple PM's to Halltech. Never any response. Posted here, got 1 response and nothing since.

I am asking Halltech to take my money but I guess they don't want it.

Yep.....same here. Bought a mf103 set up for my GS and have had some questions on letting more air in the Bee Hive and nothing.....have resent it and still nothing. Unless they take a long winters vacation and no business is conducted then I don't know what up with that.........

I am here to answer questions, just ask away. If you tried to contact me recently, I was attending my mother's funeral.

Jim

Possibly sending to jim@xxxxx That email was flooded with junk at the rate of 1000 emails weekly. New email is jhall@halltechsystems.com or sales@halltechsystems.com.

I have not been of the forum for a while, attending to personal business. My apologies.

Jim

We may have one Beehive uncut, but we have not made a template for the stock intake. You could call or email me at jhall@halltechsystems.com tomorrow and I will personally look to see if we still have that one in stock.

Thanks,

Jim

Spaceme1117 was here first so he should get it if you’ve got it. If you happen to find a second one let me know! My condolences to you on this tough time for you and your family. Hope better days are ahead!

Thank you.

Yes, so sorry to hear about your Mother's passing....... very sorry to hear that.

I have two, but one is being used in our carbon fiber shop to make a carbon fiber mold. $129.00. you will have to call since we do not have these on our website.

Jim

So does that mean the other one will be available once it's done being used? Just asking as I'm sure Spaceme1117 wants the first one. Thanks

Sorry for your loss and if I was out of line.

I will call tomorrow. Thanks.

could you let me know what they say? I’m interested in the second one if it’s available. Thanks!