Ceramic Coating - Headers
Any reputable shops in Toronto or surrounding area that ceramic coat headers? Selection very limited from what I have found online and not great reviews.
|
I've used Fireball Coatings in Erin Ont a few times for headers and other parts on a couple different cars over the years, the headers on our old Iroc well over 10 years old and still holding up well, plus the headers and exhaust on my C5 that's about 6 - 7 years old and holding up well...I see a place in Burlington - Jet Hot Coatings - but I've no experience with them...
|
Originally Posted by dankhts
(Post 1598890537)
I've used Fireball Coatings in Erin Ont a few times for headers and other parts on a couple different cars over the years, the headers on our old Iroc well over 10 years old and still holding up well, plus the headers and exhaust on my C5 that's about 6 - 7 years old and holding up well...I see a place in Burlington - Jet Hot Coatings - but I've no experience with them...
|
These guys did my headers over 15yrs ago, and they still look the same today!
http://www.hightechcoatings.com/ :cheers: |
Originally Posted by 7t2vette
(Post 1598891727)
These guys did my headers over 15yrs ago, and they still look the same today!
http://www.hightechcoatings.com/ :cheers: |
Originally Posted by Red Devil
(Post 1598891797)
Did you drive or ship? I did see them in my search and it sounds like they do awesome work but they are three hour drive and shipping costs would be super high on such a big box, I have a hard time believing there's nobody local who does good work.
|
Heh bud,
I have seen 7T2Vette’s car many times ...they look awesome, good guy to listen to as he a true Motörhead with an exceptional car. regards Ian |
I've used fireball for big block chevelle headers they held up for 10 years til i sold the car, had shorty headers done last year on my 35 chevy looking good after one season
|
Originally Posted by 7t2vette
(Post 1598891727)
These guys did my headers over 15yrs ago, and they still look the same today!
http://www.hightechcoatings.com/ :cheers: |
It's too bad you're down east as out here in the west-Calgary- I used a place called Top Gun Powder coatings. They powder coated many a part for me and they also ceramic coated my last set of BBC headers. There was an imperfection in the coating-which I couldn't see- and they insisted that they redo them for me. They did and I was still really impressed with their work. I would recommend them to anyone wanting to get stuff powder/ceramic coated. Here we have a plethora of places that do coatings like that. Good luck with your search........
|
Any shop that does good enough work for Bruce (7T2VETTE) is probably good enough for anyone on this forum.
|
I know this is pretty old but Brightside Customs in Scarborough did a phenomenal job (and killer price) coating my long tubes and x pipe. +14165708893 talk to Mike and tell him Matt with the Corvette Z06 sent you.
|
Originally Posted by Red Devil
(Post 1598891797)
Did you drive or ship? I did see them in my search and it sounds like they do awesome work but they are three hour drive and shipping costs would be super high on such a big box, I have a hard time believing there's nobody local who does good work.
|
Originally Posted by kidneyboy
(Post 1599022468)
Any shop that does good enough work for Bruce (7T2VETTE) is probably good enough for anyone on this forum.
|
they won t rust, discolor or rot in the garage.
|
All times are GMT -4. The time now is 08:11 AM. |
© 2024 MH Sub I, LLC dba Internet Brands