|
WE FINALLY HAVE IT! The new V15-Z head units- FOR THE TRULY DEMENTED
Well, it’s finally here. No bragging about a product we “may” have in the future. We actually have the new V15-Z head unit in our possession. There’s been a lot of talk about this but I’ve kept quiet until I actually had one in hand. I didn’t want to make a big deal about something I couldn’t produce. I’ve even heard of shops taking deposits on a non- existent product for some time.
While I do have a unit here, it may be a while before I am able to sell one. I need to design a new inlet and possibly a water to air intercooler setup. The radiator will also need to be redesigned to do this properly. I want to have a fully functional system in place so you don’t have to start cobbing stuff together to make it work. I’ll try to get this in motion as quickly as I can. Here are a couple of teaser pictures comparing it to the YSi. I’ll have Josh post specs and possibly pricing as soon as we have them. For those with YSi head units, this might be an opportunity to trade yours in to step up to the V15. We’ll have to see how that will work out. https://cimg4.ibsrv.net/gimg/www.cor...8b7c63083e.jpg https://cimg5.ibsrv.net/gimg/www.cor...3bbd34b29a.jpg https://cimg8.ibsrv.net/gimg/www.cor...b801259746.jpg PLEASE TAKE A MOMENT TO VISIT OUR WEBSITE AT WWW.AACORVETTE.COM NOW PARTNERING WITH AFFIRM TO OFFER INTEREST FREE FINANCING! A&A CORVETTE 477 LAMBERT ST OXNARD CA 93036 WWW.AACorvette.com A&A CORVETTE SUPERCHARGER SYSTEMS HOME OF THE WORLDS FIRST CENTRIFUGALLY SUPERCHARGED C7 SUPERIOR ENGINEERING- SUPERIOR POWER SUPERIOR PRICING- SUPERIOR CUSTOMER SUPPORT Andy@AACorvette.com 805- 278 4107 |
When do you want me to ship my car out there for testing? LOL
|
Monster. Really.
I still like my tiny T-Trim that was installed over 10 years ago or so... :-) |
I'm ready to cog that sum bitch so put me on the list!
|
ttt
Dam Andy that looks like it is going to be a nice unit for some great HP.Cant wait to see a graphic & chart on it... Robert
|
Originally Posted by algZO6
(Post 1599002895)
When do you want me to ship my car out there for testing? LOL
|
Originally Posted by Andy@A&ACorvette
(Post 1599006176)
Josh and I were talking about that today. I'll get with you on that. :thumbs:
|
That is big, lots of fun to get it to fit I'm sure.... I have no doubt you'll make it happen though.
|
That's certainly a big blower, what is the CFM?
|
Looks massive. Even bigger than the V4 ?
Whatever did happen the XB-110 ? Although a XB-105 would have made more sense. |
Dang. Just bought my ysi too. Feels bad. Lol that thing makes a ysi look like a toy.
|
Just a quick update. We have two large water to air coolers mocked up in the left and right fenders, in front of the tire. They are rated at 1400 HP each, so there will be more than enough capacity for pretty much anything you can throw at it.
We're running a 3 1/2" Y out of the blower into 3" tubing to each cooler. 3" tubing comes out of each cooler to another Y and then to a 4" tube to the throttlebody. The heat exchanger is 26 X 7 X 3 1/2 with a 2 1/2 gallon ice / water reservoir in the back of the car. I'm using a 1200 GPH bait pump from West Marine mounted directly in the tank. These pumps work great in this sort of application. A ton of water flow is key in cooling the charge air. On the inlet side, we're running a 4 1/2" aluminum tube directly into the blower. I just need to find a filter that is big enough for street use. This is looking real good so far. I think I'm going to make a similar setup available for the YSi when this is finished. PLEASE TAKE A MOMENT TO VISIT OUR WEBSITE AT WWW.AACORVETTE.COM NOW PARTNERING WITH AFFIRM TO OFFER INTEREST FREE FINANCING! A&A CORVETTE 477 LAMBERT ST OXNARD CA 93036 WWW.AACorvette.com A&A CORVETTE SUPERCHARGER SYSTEMS HOME OF THE WORLDS FIRST CENTRIFUGALLY SUPERCHARGED C7 SUPERIOR ENGINEERING- SUPERIOR POWER SUPERIOR PRICING- SUPERIOR CUSTOMER SUPPORT Andy@AACorvette.com 805- 278 4107 |
Originally Posted by Andy@A&ACorvette
(Post 1599178266)
Just a quick update. We have two large water to air coolers mocked up in the left and right fenders, in front of the tire. They are rated at 1400 HP each, so there will be more than enough capacity for pretty much anything you can throw at it.
............... blah blah blah https://cimg6.ibsrv.net/gimg/www.cor...c5c0fb019.jpeg |
We're working on this between other jobs but it's coming along. You spend a lot of time trying stuff that you find later will interfere with somethng else and you have to go back and change it.
https://cimg3.ibsrv.net/gimg/www.cor...d7d85491c.jpeg https://cimg4.ibsrv.net/gimg/www.cor...05973bc63.jpeg https://cimg7.ibsrv.net/gimg/www.cor...d8ccd9fe8.jpeg |
| All times are GMT -4. The time now is 08:45 AM. |
© 2024 MH Sub I, LLC dba Internet Brands