WTB Nitrous hardware LT5 specific
Looking to put a 150 shot on my car in the near future. I'm going to try and hide everything under the plenum as all the vacuum stuff has been removed. PM me with what you have.
I need to pull the plenum to change out my AC compressor and would like to plumb this in at the same time even if I don't finish the NOS right away. Thanks Rob |
kurt was selling his direct port nitrous kit on ebay a while back.
it's blown up a few 415s |
Kurt had a set of plates made that go between the plenum and the injector housings.
https://www.ebay.com/itm/90-95-Corve...cAAOSwfwFcbVNC They've been on eBay for years and years. There might be fitment problems between the plenum and the hood with these plates installed. 'Crabs |
Originally Posted by Rob 93ZR-1
(Post 1599084491)
Looking to put a 150 shot on my car in the near future. I'm going to try and hide everything under the plenum as all the vacuum stuff has been removed. PM me with what you have.
I need to pull the plenum to change out my AC compressor and would like to plumb this in at the same time even if I don't finish the NOS right away. Thanks Rob https://www.summitracing.com/int/par...make/chevrolet |
also be advised of the fitment issues when pieces of the plenum shoot through the hood
|
Originally Posted by Rkreigh
(Post 1599098695)
also be advised of the fitment issues when pieces of the plenum shoot through the hood
Marty |
All times are GMT -4. The time now is 07:02 PM. |
© 2024 MH Sub I, LLC dba Internet Brands